You may also like
Anchors 1/4 X 2" Hand Drive Pins St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JDP6 – Frequently Asked Questions
1) What are hand drive pins used for on an electrical rough-in?
Hand drive pins are a one piece masonry fixing you set with a hammer, no powder actuated tool and no expansion anchor to seat separately. Electricians use them for fastening strap, clips, boxes and small conduit supports to concrete and block. The JDP6 at 1/4 by 2 inches gives you enough length to get through a thin bracket and still take embedment in the base material.
2) Do I need a special tool or powder charge to install the JDP6 drive pin?
No. These are hand drive pins, set with a hammer, so there is no powder actuated tool, no charge, and no operator certification involved. That makes them the practical choice on occupied buildings and small punch list work where a powder tool is not allowed or not worth hauling in.
3) Is the Metallics JDP6 an expansion anchor or a solid pin?
It is a solid drive pin, not an expanding anchor. There is no sleeve, cone, or screw to tighten, which means it is a permanent fixing: to remove it you cut or pull it, you cannot back it out like a sleeve anchor or a tapcon. If the fixing has to come off later for service, use a threaded anchor instead.
4) Is the JDP6 drive pin corrosion protected for damp locations?
The pins are zinc plated steel, which handles normal interior and dry concrete work. Zinc plating is a light coating, so for exterior, wet, or corrosive environments you would want a hot dip galvanized or stainless fixing instead.
5) Is there only one size option, or do I pick a length when ordering the JDP6?
JDP6 is a single fixed configuration, 1/4 by 2 inches in zinc plated steel, 100 per jar. Nothing to specify on the order beyond quantity of jars. Other lengths in the hand drive pin line carry their own part numbers.
How fast can I get the Metallics JDP6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDP6 come with a warranty?
Absolutely. The Metallics JDP6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDP6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDP6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.