Metallics TS505SSD Anchors 5/8...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$134.39
$100.08

Metallics TS505SSD Anchors 5/8 x 5 Wdg SS (Box 25)

(No reviews yet) Write a Review

Model: TS505SSD
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$134.39
$100.08
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors 5/8 x 5 Wdg SS (Box 25)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Anchors

Metallics TS505SSD – Frequently Asked Questions

1) What hole size do I drill for a 5/8 inch wedge anchor like the TS505SSD?
A wedge anchor is drilled with a carbide bit matching the anchor's nominal diameter, so a 5/8 inch anchor takes a 5/8 inch hole in the concrete. The hole has to be drilled deeper than the embedment you want so the dust has somewhere to go. The TS505SSD is 5 inches overall, so your embedment is that 5 inches less the thickness of whatever you are fastening down plus the nut and washer.
2) Can I use the TS505SSD wedge anchor in block or brick instead of concrete?
No. Wedge anchors are for solid, poured concrete only. The expansion clip needs continuous solid material to bite against, and hollow block or brick will crush or blow out. For CMU, use a sleeve anchor or a screw anchor rated for hollow base material instead.
3) Will stainless wedge anchors hold up outdoors or in a wet mechanical room?
Yes. The TS505SSD is a stainless steel wedge anchor, which is what you want for exterior pads, parking structures, pool and wash-down areas, or anywhere a zinc-plated carbon steel anchor would rust and stain the concrete. For dry interior slab work, a plated anchor of the same size does the same mechanical job at lower cost.
4) Does the TS505SSD wedge anchor come with a nut and washer?
Wedge anchors ship as a complete assembly, with the nut and washer already threaded onto the stud end, so you drill, drop the anchor through your fixture, and torque the nut to set the clip. Nothing else is needed except a 5/8 inch carbide bit and a hammer drill.
5) Can a wedge anchor like this be removed or reused later?
No. Once a wedge anchor is torqued, the expansion clip is permanently set in the hole. You can back the nut off and remove the fixture, but the anchor body stays in the concrete. If you need a removable connection, use a threaded insert or a female drop-in anchor instead of the TS505SSD.
How fast can I get the Metallics TS505SSD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS505SSD come with a warranty?
Absolutely. The Metallics TS505SSD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS505SSD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS505SSD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.