Arrow QL82SR-LE-EU Grade 1 Sto...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$666.02
$273.24
Arrow QL82SR-LE-EU Grade 1 Storeroom Sierra Lever, Schlage C Keyway - Electrified (Fail Secure), w/Out Request to Exit

Arrow QL82SR-LE-EU Grade 1 Storeroom Sierra Lever, Schlage C Keyway - Electrified (Fail Secure), w/Out Request to Exit

(No reviews yet) Write a Review

Model: QL82SR26D-CS-LE-EU 11-30 VDC
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$666.02
$273.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Arrow QL82SR-LE-EU Grade 1 Storeroom Sierra Lever, Schlage C Keyway - Electrified (Fail Secure), w/Out Request to Exit

Arrow Lock Company QL Series Cylindrical Lockset

QL Series is a robust Grade 1 lockset featuring a Freewheeling Lever for abuse resistance, two screw lockset install for quick installation and a 10 Year Mechanical Warranty. The perfect solution for replacing or upgrading lockets in commercial applications.

Features:

  • ANSI/BHMA A156.2, Series 4000, Grade 1.
  • Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
  • Federal Specification FF-H-106C.
  • ANSI A117.1 Accessibility Code.
  • California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.
  • ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9.

 

Specifications:

  • Door Preparation: Requires standard 2-1/8" (54mm) bore through door.
  • Backset: 2-3/4" (70mm).
  • Door Thickness: Fits 1-3/8" (35mm) to 1-3/4" (44mm) doors standard.
  • Latch: Stainless Steel 1/2" (13mm) throw, UL Listed, guarded latchbolt on all locking Functions.
  • Latch Front: 1-1/8" x 2-1/4" for 2-3/4" (70mm) backset.
  • Exposed Trim: QL Levers are pressure cast zinc measuring 4-3/4" (121mm) in length. QL Roses are wrought brass 3-11/32" (85mm) diameter. Total projection from face of door is 2-17/32" (65mm).
  • Freewheeling Lever.
  • Handing: Non-handed.
  • Strike: 4-7/8" ANSI (124mm).
  • Cylinder: Standard: solid brass, 6-pin, keyed different, Arrow A or Schlage C keyway. Optional: prep for small or large format interchangeable core cylinder (cylinder not included).
  • Keys: 2 brass keys.
  • Design: Sierra (SB).
  • Installation: 161 prep for retrofit and secure installation.
  • Warranty: Ten Year Warranty.

 

Function:

  • QL01 Passage: Latchbolt operated by lever either side.
  • QL02 Privacy:Latch operated by lever either side except when outside lever is locked by pushing inside button. Outside lever unlocked by turning inside lever, using emergency key, or closing door. Inside lever always operates latch.
  • QL72 Privacy: Latch operated by lever either side except when outside lever is locked by pushing inside button. Outside lever unlocked by turning inside lever, using emergency key, or closing door. Inside lever always operates latch
  • QL81 Entrance:Latchbolt operated by lever either side except when outside lever is locked by turn-button inside. When outside lever is locked, latchbolt operated by key outside or turning inside lever. Inside button must be manually released.
  • QL82 Storeroom: Outside lever always rigid. Latchbolt operated by key in outside lever, or by turning inside lever.
  • QL87 Classroom: Latchbolt operated by lever either side except when key outside locks outside lever. Inside lever always free. Key outside locks/unlocks out-side lever only.
  • QL97 Intruder Classroom: Deadlocking latch bolt operated by lever from either side. Key either inside or outside locks or unlocks outside lever. Inside lever always operates latchbolt.

 

Accessories:

  • Q73: Spring Latch: 2-3/4" Backset. 1/2" Throw.
  • Q71: Dead Latch: 2-3/4" Backset. 1/2" Throw.
  • 306: ANSI 115.2 Strike Standard with QL Series.

 

Finishes:

  • 605/US3 - Bright Brass
  • 613e/US10BE - Dark Oxide Satin Bronze Equivalent
  • 626/US26D - Satin Chromium Plated

Manufacturer Resources

Arrow Express Catalog

Product Specs

Subcategory:
Cylindrical Locks
Product Group:
Mechanical Locks
Series:
QL Series
Grade:
Grade 1
Keyed Function:
Single Cylinder
Standard Latch:
G71 Deadlatch; 2-3/4" Backset
Standard Strike:
306 ASA ANSI Strike, 4-7/8" x 1-1/4"
ANSI/BHMA:
F84
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Keyed:
Yes
Fasteners:
Wood and Machine Screws
Commercial/Residential:
Commercial
Latch Faceplate:
1-1/8" x 2-1/4"
Function Description:
Latchbolt operated by lever either side except when key outside locks outside lever. Inside lever always free. Key outside locks/unlocks outside lever only.
Lock Type:
Cylindrical
Handle Type:
Lever
Lock Function:
Storeroom
Product Attribute:
Cylindrical Locks
Product Model:
QL82SR
Product Function:
Storeroom
Door Hand Direction:
Non-Handed
Door Thickness Range:
1-3/4" to 2"
Product Category:
Mechanical Locks
Department:
Door Hardware

Arrow QL82SR26D-CS-LE-EU 11-30 VDC – Frequently Asked Questions

1) What happens to the Arrow QL82SR-LE-EU lever when the power goes out?
It's a fail secure electrified lock, so on loss of power the outside lever stays locked. Access from outside is by key only until power is restored. The inside lever always retracts the latchbolt, so egress is never affected. If your opening needs the outside lever to unlock on power failure (stair towers, some fire alarm interfaces), you want a fail safe lock instead, such as the Corbin Russwin CL33903 electrified cylindrical lever.
2) Does the QL82SR-LE-EU have a request-to-exit switch or door position monitoring?
No. This configuration is built without request to exit, so there is no REX switch signal back to your access control panel. You get the electrified outside lever only. If your system needs to see when someone leaves from the secure side, specify a version with request to exit rather than this one.
3) How does storeroom function actually behave on a door?
Outside lever is always rigid, meaning it never retracts the latch by turning it. Entry from outside is by key only. Turning the inside lever always retracts the latchbolt for free egress. That makes it the normal choice for mechanical rooms, stock rooms, IT closets and any door that has to stay locked at all times without anyone remembering to lock it.
4) Will this Arrow QL lever drop into the prep from the lock I'm taking off?
If the existing door is a standard 161 cylindrical prep it will. The QL Series uses a 2-1/8 inch (54mm) bore through the door, a 2-3/4 inch backset, and a 1-1/8 x 2-1/4 inch latch face. The strike is the 4-7/8 inch ANSI (124mm) 306 strike, which is the standard ASA frame cutout. Arrow calls out 161 prep specifically for retrofit, so most commercial replacements need no new boring.
5) Do I need to order a left or right hand version of this Arrow storeroom lever?
No handing to specify. The QL82SR is non-handed, so one part covers left and right hand doors, inswing or outswing. For property managers stocking spares that means a single SKU covers every opening in the building.
6) Can I key this Arrow lever into my existing Schlage C master key system?
Yes. The QL82SR-LE-EU ships with a solid brass 6-pin cylinder in the Schlage C keyway, keyed different with 2 brass keys, so a locksmith can rekey it into an existing Schlage C system. Arrow A keyway is the other standard option, and the QL Series can also be prepped for small or large format interchangeable core if you run an IC system (core not included in that case).
7) Is this Arrow lockset rated for a fire door?
The QL Series is UL and cUL listed for use on 3 hour A label single swinging doors, and the latchbolt is UL listed. It also meets ANSI/BHMA A156.2 Series 4000 Grade 1 and Federal Specification FF-H-106C, which is what most institutional and government specs call for on a storeroom opening.
8) What comes in the box, and what else do I have to order to finish the install?
You get the lever set with the deadlatch, the 306 ANSI strike, a 6-pin cylinder and 2 brass keys, plus wood and machine screws. Installation is a two screw lockset so it goes on fast. What is not in the box is the wiring: being an electrified lock, you still need a power supply, an electric power transfer or door loop to get power from frame to door, and whatever controls the circuit (card reader, panel, key switch). Spare latches are available separately as the Q73 spring latch or Q71 dead latch, both 2-3/4 inch backset with 1/2 inch throw.
9) What is the closest electrified Grade 1 cylindrical lever to the Arrow QL82SR-LE-EU?
The Arrow QL82SR-LE-EU is an electrified Grade 1 cylindrical storeroom lever in fail secure configuration. For an electrified Grade 1 cylindrical lever in the opposite fail mode, the Corbin Russwin CL33903 is a Grade 1 fail safe electrified cylindrical lever lock rated 12VAC/DC for doors 1-3/4 inch to 2 inch, offered keyed and with an NZ lever on a D rose. Fail secure keeps the outside lever locked on power loss; fail safe unlocks it, so confirm which the egress and access control design calls for before substituting.
10) What is a Grade 2 alternative to the Arrow QL82SR storeroom lever for lighter-traffic openings?
The Arrow QL82SR is a Grade 1 cylindrical storeroom leverset. If a Grade 2 storeroom lever suits the opening, the Cal-Royal AG05 is a Grade 2 storeroom leverset with a deadlocking latchbolt and fits doors 1-3/8 inch to 1-3/4 inch, and the Hager 2580 with Withnell lever is a Grade 2 storeroom cylindrical lock fitting doors 1-3/8 inch to 2 inch. The Arrow is the heavier ANSI grade of the three.
11) The door needs the inside lever to stay free at all times - what should I use instead of the Arrow QL82SR storeroom lever?
On the Arrow QL82SR the outside lever is always rigid and the latchbolt is retracted by key outside or by turning the inside lever. If the requirement is a classroom arrangement where the key only locks and unlocks the outside lever and the inside lever is always free, the Dexter C1000 classroom lever is Grade 1 with clutching levers for doors 1-3/8 inch to 1-3/4 inch, the Dexter C1000 Classroom Security adds key control of the outside lever from both sides, and the Cal-Royal AG03 is a Grade 2 classroom lever with a 6-pin Schlage C keyway keyed different on a 2-3/4 inch backset.
12) Which levers match the Arrow QL82SR's Schlage C keyway so the storeroom keys into the same system?
The Arrow QL82SR-LE-EU is offered with a 6-pin Schlage C keyway. Among comparable commercial levers, the Cal-Royal AG00 entrance lever is a Grade 2 lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset, and the Cal-Royal AG03 classroom lever uses the same 6-pin Schlage C keyway on a 2-3/4 inch backset. For Yale hardware, the Accentra 107S is a Schlage cylinder adapter kit. Note the Arrow uses a 2-3/4 inch backset, so match backset as well as keyway.
13) Will the 1/2 inch latch throw engage my existing strike?
The stainless steel latchbolt throws 1/2 inch (13mm) and it is a G71 deadlatch on a 2-3/4 inch backset. That is standard commercial throw, so it will catch a 4-7/8 inch ANSI strike set at normal depth. If your frame has a deep-recessed or shimmed strike lip, or a large gap between door and frame, check that the bolt still projects fully into the pocket before you rely on the deadlatch.
14) Is this lever ADA compliant for a public building?
Yes. The Sierra lever meets ANSI A117.1 accessibility and is listed as acceptable door hardware under ADA Section 4.13.9. It also satisfies the California State Reference Code requirement for levers that return to within 1/2 inch (12.7mm) of the door face, so it works on California projects where lever return is enforced.
15) Will a freewheeling lever survive abuse on a high-traffic school or dorm door?
That is what it's for. On the QL Series the rigid outside lever freewheels under force rather than transmitting the load into the lock body, so someone hanging on the handle or kicking it down doesn't break the internal mechanism. The lever itself is pressure cast zinc, 4-3/4 inch (121mm) long, on a wrought brass rose 3-11/32 inch (85mm) in diameter, projecting 2-17/32 inch (65mm) off the door face. That projection matters if the door swings near a wall or a return.
16) I don't need the electrified part, I just want a keyed storeroom lever. What are my options?
For a straight mechanical storeroom lock, the Hager 2580 with Withnell lever and the Cal-Royal AG05 with deadlocking latchbolt are both Grade 2 storeroom levers. Both are lighter duty than the Arrow QL82SR, which is Grade 1, so on a high-abuse or institutional opening stay with the Grade 1. On a low-traffic back-of-house storage door the Grade 2 options are the simpler buy since neither needs power, transfer hinges or a control panel.
17) Can I standardize a whole building on the QL Series but use different functions per door?
Yes, and that's the usual approach. The QL Series shares the same 161 prep, 2-3/4 inch backset, 306 strike and Sierra lever trim across functions, so QL01 passage on corridors, QL02 or QL72 privacy on restrooms, QL81 entrance on offices, QL82 storeroom on locked rooms, QL87 classroom and QL97 intruder classroom on teaching spaces all install into the same door prep and look identical from the hallway. One keyway and one finish covers the building.
18) If the opening does not need a key, what non-keyed Grade 1 lever can replace the Arrow QL82SR?
The Arrow QL82SR is a keyed single-cylinder storeroom lever. Where the door only needs to latch, Grade 1 non-keyed cylindrical passage levers include the Falcon K101, heavy duty and fire rated for doors 1-3/8 inch to 2-1/4 inch, the Falcon T101 heavy duty passage lever, the Dexter C1000 passage lever with clutching levers for doors 1-3/8 inch to 1-3/4 inch, and the Corbin Russwin CL3110 vandal resistant passage lever for doors 1-3/4 inch to 2 inch.
19) Is a keypad lever like the Lockey 2835 or Delaney LP250 a substitute for the Arrow QL82SR-LE-EU?
They solve a different problem. The Arrow QL82SR-LE-EU is a keyed Grade 1 electrified storeroom lever, so access is controlled by key and by the access control system wired to the lock. The Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function for doors 1-3/16 inch to 2 inch, the Lockey 1150 is a mechanical keypad lever set with passage function for doors 1-1/8 inch to 2 inch, and the Delaney LP250 is a Grade 2 electronic keypad leverlock. Credential is a code rather than a key, and the Lockey units are passage function, not storeroom.
20) Will a dummy lever work where the Arrow QL82SR storeroom lock is specified?
No. The Arrow QL82SR is a keyed cylindrical storeroom lock with a G71 deadlatch on a 2-3/4 inch backset and a 306 ANSI strike, so it latches and secures the door. Dummy trims such as the BEST 9K 1DT Grade 1 single dummy, the BEST 7KC 1DT Grade 2 single dummy, and the Accentra 455LN Augusta Grade 1 single dummy are fixed pull trim with no latch at all - use them on inactive leaves or closet faces, not on a secured storeroom.
21) For an entry office door rather than a storeroom, what lever takes the place of the Arrow QL82SR?
The Arrow QL82SR keeps the outside lever always rigid, which is storeroom behavior. For an entry or office door where the outside lever can be left unlocked, the Hager 2525 is a Grade 2 commercial cylindrical entry lever for doors 1-3/8 inch to 2 inch, the Falcon B511CP6D is a Grade 2 medium duty entry/office cylindrical lever, and the Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body for doors 1-3/8 inch to 1-3/4 inch.
22) What finish does the Arrow QL82SR-LE-EU electrified storeroom lever come in?
626 Satin Chrome (US26D) is the finish offered in this electrified fail secure configuration. That is the standard commercial finish, so it matches most existing hinges, closers and exit devices already hanging in a commercial building. Non-electrified QL Series levers are also catalogued in 605/US3 Bright Brass and 613e/US10BE Dark Oxide Satin Bronze Equivalent.
23) Is the Corbin Russwin 585F715 lock lever an alternative to the Arrow QL82SR?
No. The Arrow QL82SR is a complete keyed Grade 1 cylindrical storeroom leverset with latch and strike. The Corbin Russwin 585F715 is a Grade 1 lock lever for the ED8000 pushpad exit device and the CL3300 cylindrical lock series, rated for 1-3/4 inch to 2 inch doors - it is trim for an existing device, not a standalone lockset.
How fast can I get the Arrow QL82SR26D-CS-LE-EU 11-30 VDC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Arrow QL82SR26D-CS-LE-EU 11-30 VDC come with a warranty?
Absolutely. The Arrow QL82SR26D-CS-LE-EU 11-30 VDC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Arrow QL82SR26D-CS-LE-EU 11-30 VDC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Arrow QL82SR26D-CS-LE-EU 11-30 VDC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!