B-Line Eaton Series C complete...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12,450.56
B-Line Eaton Series C complete , F-, FDC, Complete , Fixed thermal, fixed magnetic trip type, Three-pole, 110A, 600 Vac, 250 Vdc, 200 kAIC at 240 Vac

B-Line Eaton Series C complete , F-, FDC, Complete , Fixed thermal, fixed magnetic trip type, Three-pole, 110A, 600 Vac, 250 Vdc, 200 kAIC at 240 Vac

(No reviews yet) Write a Review

Model: FDC3110L
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12,450.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton Series C complete molded case circuit breaker, F-frame, FDC, Complete breaker, Fixed thermal, fixed magnetic trip type, Three-pole, 110A, 600 Vac, 250 Vdc, 200 kAIC at 240 Vac, 100 kAIC at 480 Vac, Line and load, 50/60 Hz

FDC3110L - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Amperage Rating:
110A
Certifications:
UL Listed
Circuit Breaker Frame Type:
Complete breaker
Circuit Breaker Type:
FDC
Frame:
F-frame
Frequency Rating:
50/60 Hz
Interrupt Rating:
200 kAIC at 240 Vac, 100 kAIC at 480 Vac
Number Of Poles:
Three-pole
Product Height:
4.13 IN
Product Length Depth:
3.38 IN
Product Weight:
4.5 LB
Product Width:
4.13 IN
Series:
Series C
Terminals:
Line and load
Trip Type:
Fixed thermal, fixed magnetic
Voltage Rating:
600 Vac, 250 Vdc
Department:
Electrical
Product Length:
3.38 in

B-LINE FDC3110L – Frequently Asked Questions

1) Will an Eaton FDC3110L breaker hold up on a 480V system, or is the 200 kAIC rating only good at 240V?
Interrupting capacity steps down with voltage on the FDC3110L: 200 kAIC at 240 Vac and 100 kAIC at 480 Vac. It's rated 600 Vac and 250 Vdc, so it can be applied up to 600 Vac, but when you're checking it against an available fault current study, use the 100 kAIC figure for a 480V service, not the headline 200 kAIC number.
2) Is the FDC3110L trip unit adjustable, or is the 110A setting fixed?
It's a fixed unit on both halves: fixed thermal and fixed magnetic trip, rated 110A three-pole. There's no dial to raise or lower the instantaneous or overload pickup, so if your coordination study calls for an adjustable magnetic setting you need a different trip configuration. Where the design just calls for straight 110A three-pole overcurrent protection, fixed is simpler and there's nothing to be set wrong in the field.
3) Do I have to buy terminals separately for the Eaton FDC3110L, or does it come ready to wire?
It ships as a complete breaker with line and load terminals included, so it's ready to land conductors out of the box. That's the difference between a complete breaker and a frame-only or trip-unit-only order: no separate terminal kit needed to make it a working device.
4) What size opening or panel space do I need for an F-frame FDC three-pole breaker?
The FDC3110L measures 4.13 in height, 4.13 in width and 3.38 in depth, and weighs 4.5 lb. Lay that against your enclosure or panel gutter space before you commit, and account for the depth behind the deadfront plus wire bending space at the line and load terminals. It's an F-frame device, so it will not drop into a J- or K-frame mounting pattern.
5) Can I use this Eaton Series C breaker on a 250V DC circuit as well as AC?
Yes. The FDC3110L is rated 600 Vac and 250 Vdc, and 50/60 Hz on the AC side, so it covers both a 50 or 60 Hz AC feeder and a 250 Vdc application at 110A three-pole. Pole arrangement for a DC application follows the manufacturer's application instructions.
6) Is the FDC3110L UL Listed for an inspected commercial installation?
It carries a UL Listed marking, which is what an AHJ will look for on a molded case breaker in a commercial or institutional panel. Pair that with the interrupting ratings, 200 kAIC at 240 Vac and 100 kAIC at 480 Vac, when you're documenting series or fully rated compliance for the inspection.
7) What exact part number do I order for a 110A three-pole Eaton FDC breaker?
The part number is FDC3110L, an Eaton Series C molded case breaker, F-frame, FDC type, 110A three-pole. The C in FDC denotes the high interrupting version of the F-frame family, which is why it reaches 200 kAIC at 240 Vac. If a drawing calls out a plain FD at the same amperage, that is a lower interrupting rating and not the same device.
How fast can I get the B-LINE FDC3110L delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FDC3110L come with a warranty?
Absolutely. The B-LINE FDC3110L is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FDC3110L?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FDC3110L from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!