B-Line Eaton series Flex tray ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$368.09
B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 12.1" actual area inside tray, 2" deep fl

B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 12.1" actual area inside tray, 2" deep fl

(No reviews yet) Write a Review

Model: FT2X6X10 GS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$368.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 12.1" actual area inside tray, 2" deep flex tray

Manufacturer Resources

Product Specs

Application:
Limited industrial and interior
Certifications:
CE
Product Height:
2.38 in
Product Length Depth:
118.312 in
Product Weight:
9.7 lb
Product Width:
6 in
Special Features:
12.1" area inside tray
Department:
Electrical
Product Type:
2" deep flextray
Product Finish:
Pre-galvanized
Product Details:
2" deep flextray
Product Material:
Steel

B-LINE FT2X6X10 GS – Frequently Asked Questions

1) What size cable tray is the B-Line FT2X6X10 GS flex tray, and how much cable fill does it actually give me?
The FT2X6X10 GS is a 2 inch deep wire basket tray, 6 inches wide, in a 118.312 inch (roughly 10 foot) stick. Usable fill area inside the basket is 12.1 square inches, so size your bundle against that number rather than the nominal 2 x 6 outside dimension. Overall height of the section is 2.38 inches.
2) Can I run the B-Line FT2X6X10 GS pre-galvanized flex tray outdoors or in a wet/corrosive plant area?
No. This tray is pre-galvanized zinc over steel and is rated by Eaton B-Line for limited industrial and interior applications. That covers indoor data rooms, ceilings, telecom and light industrial runs. For outdoor, washdown, or corrosive environments you want a hot-dip galvanized after fabrication or stainless basket tray instead.
3) Does the B-Line FT2X6X10 GS wire basket tray come with splices, hangers or brackets?
What you order here is the tray section itself, model FT2X6X10 GS, a 10 foot pre-galvanized steel basket. Splice connectors, wall brackets, trapeze hangers, threaded rod and any dropout or radius fittings are separate line items and need to be counted per run: figure a splice at every joint between sticks.
4) How much does a 10 foot stick of 2 inch by 6 inch B-Line flex tray weigh for overhead support spacing?
Each 118.312 inch section weighs 9.7 pounds empty. That is the dead load your trapeze or wall bracket carries before cable, so add your bundle weight on top when you lay out support spacing.
5) Is wire basket tray like this a better choice than solid-bottom or ladder tray for low voltage cabling?
Basket tray is the usual pick for data and communications cable because the open mesh lets you drop cable in anywhere along the run and dress it out without pulling through, and it ventilates the bundle. Solid bottom tray is for shielding and dust protection, ladder tray for heavy power feeders on long support spans. At 2 inches deep with 12.1 square inches of fill, the FT2X6X10 GS is sized for a modest comms or control bundle, not a power feeder run.
6) Can the B-Line flex tray be cut and bent on site to make turns and drops?
Yes, that is how basket tray is normally installed. The wire mesh is cut with a bolt cutter or tray cutter and formed into elbows, tees and drops in the field, so you are not ordering pre-made fittings for every turn. On the FT2X6X10 GS the cut ends are bare steel through the pre-galvanized zinc coating, so touch them up with a cold galvanizing compound and deburr anything that can chafe cable jackets.
7) Does the Eaton B-Line FT2X6X10 GS flex tray carry any certification for a spec submittal?
It is CE marked. That is the certification carried on the FT2X6X10 GS record, so cite CE on the submittal and confirm any additional listing your project spec calls for with the manufacturer's published data.
How fast can I get the B-LINE FT2X6X10 GS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X6X10 GS come with a warranty?
Absolutely. The B-LINE FT2X6X10 GS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X6X10 GS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X6X10 GS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!