B-Line Eaton series Flex tray ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$352.83
B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 8.2" actual area inside tray, 2" deep fle

B-Line Eaton series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 8.2" actual area inside tray, 2" deep fle

(No reviews yet) Write a Review

Model: FT2X4X10 GS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$352.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Flex tray wire basket tray, Limited industrial and interior, Pre-galvanized zinc, Steel, 8.2" actual area inside tray, 2" deep flex tray

Manufacturer Resources

Product Specs

Application:
Limited industrial and interior
Certifications:
CE
Product Height:
2.38 in
Product Length Depth:
118.312 in
Product Weight:
8.2 lb
Product Width:
4 in
Special Features:
8.2" area inside tray
Department:
Electrical
Product Type:
2" deep flextray
Product Finish:
Pre-galvanized
Product Details:
2" deep flextray
Product Material:
Steel
Product Length:
118.312 in

B-LINE FT2X4X10 GS – Frequently Asked Questions

1) What size is the B-Line FT2X4X10 GS wire basket tray?
The Eaton B-Line Flex Tray FT2X4X10 GS is a 2 inch deep basket tray, 4 inches wide, with an overall height of 2.38 inches and a length of 118.312 inches (just under a 10 foot stick). It weighs 8.2 lb per section.
2) Can this pre-galvanized B-Line flex tray be used outdoors?
No. The FT2X4X10 GS is specified for limited industrial and interior applications, and the finish is pre-galvanized zinc on steel. Pre-galvanized (mill galvanized) wire is cut after coating, leaving bare steel at the cut ends, so it belongs indoors or in sheltered, dry industrial spaces. For exterior or washdown runs you want a hot-dip galvanized after fabrication or stainless basket tray instead.
3) Is a 2 inch deep by 4 inch wide basket tray enough for a small data or control cable run?
A 4 inch wide, 2 inch deep Flex Tray section like the FT2X4X10 GS is sized for light branch runs, drops off a main tray, or a modest bundle of data or control cable above a ceiling. If you are running a main backbone with dozens of Cat6 runs, step up to a wider basket; the tray depth here caps at 2 inches of fill.
4) Do I need separate hardware to splice and hang B-Line Flex Tray sections?
Yes. The FT2X4X10 GS is supplied as a single 118.312 inch tray section only. Splice connectors, hold-down clips, trapeze or wall brackets, threaded rod and any grounding bonding jumper are ordered separately, so count your supports and splice points before you order the straight lengths.
5) Can wire basket tray be cut and bent in the field instead of buying fittings?
That is the point of wire basket tray. A steel mesh tray like the 2 inch deep Flex Tray is cut with bolt cutters or a band saw and formed on site into tees, elbows and drops, which is why it is used in place of solid or ladder tray on data and low voltage work. Touch up cut ends with cold galvanizing compound, since the pre-galvanized coating does not cover the cut.
6) Does the B-Line Flex Tray FT2X4X10 GS carry any certification marking?
It carries a CE marking. That is the only certification stated for this Flex Tray section.
7) How much does a stick of FT2X4X10 GS weigh for overhead support calculations?
Each section weighs 8.2 lb empty. Add that to your cable fill weight when you size trapeze hangers and rod spacing on a 118.312 inch run.
How fast can I get the B-LINE FT2X4X10 GS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X4X10 GS come with a warranty?
Absolutely. The B-LINE FT2X4X10 GS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X4X10 GS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X4X10 GS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!