You may also like
Eaton B-Line series Flextray wire basket tray, 4" X 16", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- .098 lb
- Product Width:
- 16 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
B-LINE FT BE 4X16 – Frequently Asked Questions
1) What is a Flextray blind end and what is it used for?
A blind end is the cap that closes off the cut end of a wire basket tray run. Eaton B-Line part FT BE 4X16 is the blind end sized for a Flextray section 4 inches deep by 16 inches wide, so it covers the open end of the basket where the run terminates and keeps cable from spilling past the end of the tray.
2) Will the FT BE 4X16 blind end fit my wire basket tray?
It matches a 4 inch deep by 16 inch wide Flextray basket. If your run is a different width or depth, say 4x12 or 2x16, this cap will not line up with the side wires and you need the blind end sized to that section.
3) Is a pre-galvanized steel blind end suitable for outdoor or wet locations?
The FT BE 4X16 is steel with a pre-galvanized finish, which suits dry indoor runs, data rooms, and ceiling spaces. For exterior, wash-down, or corrosive environments, specify a Flextray end in hot-dip galvanized or stainless instead, and keep the finish consistent with the tray sections it attaches to.
4) Do I need one blind end per tray end or one per run?
One per open end. Each FT BE 4X16 closes a single 4x16 basket termination, so count every dead end in the layout, including stub-ups and drops that stop short, and order that quantity.
5) How much does a Flextray 4x16 blind end weigh?
It is listed at .098 lb, so the cap adds essentially nothing to the tray load and does not affect support spacing on the run.
How fast can I get the B-LINE FT BE 4X16 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 4X16 come with a warranty?
Absolutely. The B-LINE FT BE 4X16 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 4X16?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 4X16 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.