You may also like
Eaton B-Line series Flextray wire basket tray, 4" X 4", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- .098 lb
- Product Width:
- 4 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
- Product Length:
- 4 in
B-LINE FT BE 4X4 – Frequently Asked Questions
1) What is a blind end on a wire basket cable tray, and what does the B-Line FT BE 4X4 actually do?
A blind end is a cap that closes off the cut or terminating end of a wire basket tray. The Eaton B-Line Flextray FT BE 4X4 is that end cap, sized for a 4 inch wide by 4 inch deep basket run. It covers the open wire ends where the tray stops, so cable is not run over exposed wire tips and the termination looks finished. It is an accessory, not a section of tray, so it does not add any run length.
2) Is this blind end galvanized or painted, and can I use it outdoors?
The FT BE 4X4 is steel with a pre-galvanized finish. Pre-galvanized (mill galvanized) steel is a general indoor and dry-location finish; for wet, corrosive or exterior runs, specify a hot-dip galvanized or stainless Flextray accessory instead. Match the finish to the tray it caps so you are not mixing coatings in the same run.
3) What part number do I order for a 4 x 4 Flextray end cap?
Order Eaton B-Line part number FT BE 4X4. That is the only configuration of this item, so there is no finish or size option to specify beyond the part number itself.
4) How many blind ends do I need for my cable tray run, and how much do they add to the load?
One cap per open end. A single straight run terminating at two walls needs two; each spur or branch that dead-ends needs one more. Each FT BE 4X4 weighs .098 lb, so quantity has effectively no bearing on your tray support calculations.
How fast can I get the B-LINE FT BE 4X4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 4X4 come with a warranty?
Absolutely. The B-LINE FT BE 4X4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 4X4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 4X4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.