You may also like
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 7 jaws, 3 poles,
Model: BLN-U224 MTBP
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 7 jaws, 3 poles, 1 position, 3Ø/4W
B-LINE
$14,327.59
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 5 jaws, 3 poles,
Model: BLN-U225 MTBL
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 5 jaws, 3 poles, 1 position, 3Ø/4W, Overhead and...
B-LINE
$19,750.50
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws,
Model: BLN-214 MTB MS84
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and...
B-LINE
$5,441.31
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 7 jaws,
Model: BLN-215 MTB
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Surface mount, 7 jaws, 1 position, 3Ø/4W, Overhead and...
B-LINE
$7,727.03
B-Line Eaton series meter s, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 4 jaws, 1 position,
Model: BLN-214 MTBH
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and underground feed
B-LINE
$7,105.93
Eaton B-Line series meter breakers, 200 A, Test block, Ring type, 3R, ANSI 61 gray painted, #6-250 MCM, #6-250 MCM, Galvanized steel, Side, 4 jaws, 1 pole, 1 position, 3Ø/4W, Overhead and underground feed
Manufacturer Resources
Product Specs
- Amperage Rating:
- 200A
- Certifications:
- UL
- Compliances:
- EUSERC Approved
- Interrupt Rating:
- 42 kAIC
- Product Height:
- 30 in
- Product Length Depth:
- 6 in
- Product Weight:
- 73 lb
- Product Width:
- 22 in
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Steel
B-LINE U227 MTBH – Frequently Asked Questions
1) Will the B-Line U227 MTBH meter socket work on a 3-phase 4-wire 200 amp residential or light commercial service?
Yes. The U227 MTBH is a 200 A meter breaker socket built for 3-phase, 4-wire service, with 4 jaws and a single meter position. It accepts either overhead or underground feed, so it covers both a weatherhead drop and a lateral from a pad transformer without a different enclosure.
2) What size conductors can I land in this 200 amp B-Line meter socket?
The line and load lugs both take #6 through 250 MCM, so a 200 A service run in 3/0 copper or 250 MCM aluminum lands directly without reducers or splice blocks.
3) Can the B-Line U227 MTBH meter socket be mounted outdoors?
It is a Type 3R enclosure, which is the rainproof rating used for outdoor service equipment, in galvanized steel with an ANSI 61 gray painted finish. The conduit feed is side entry, and the cabinet measures 30 in high, 22 in wide and 6 in deep.
4) Does this B-Line meter socket meet utility requirements for a California or western utility service?
The U227 MTBH is EUSERC approved, which is the approval most western US utilities require on service metering equipment before they will set a meter. It is also UL listed. It is a ring type socket with a test block, both common utility requirements on 3-phase metering.
5) What is the short circuit rating on the B-Line U227 MTBH meter breaker enclosure?
42 kAIC. That covers most 200 A service points fed from a typical utility transformer, but on a service where the available fault current calculation exceeds 42 kA you need equipment rated above that.
6) Is the U227 MTBH one meter position or can it serve multiple tenants?
Single position, 1 pole, one meter. For a multi-tenant building you need a multi-position meter stack or meter center instead of this single-socket enclosure.
7) How heavy is this B-Line meter socket and can one person hang it?
73 lb for the steel enclosure. That is a two-person lift to set on the wall and hold plumb while the mounting fasteners go in, particularly on a 30 in tall cabinet at meter height.
8) What does the test block on this Eaton B-Line meter socket do?
The test block lets the utility isolate and test the metering circuit without pulling the meter or dropping the service. Utilities commonly require it on 3-phase installations, and it is built into the U227 MTBH rather than being a field-added accessory.
How fast can I get the B-LINE U227 MTBH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE U227 MTBH come with a warranty?
Absolutely. The B-LINE U227 MTBH is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE U227 MTBH?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE U227 MTBH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.