B-Line Eaton series strut chan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8,870.84
B-Line Eaton series strut channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B52 channel type,

B-Line Eaton series strut channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B52 channel type,

(No reviews yet) Write a Review

Model: B52KO6-120GLV
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8,870.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B52 channel type, Pre-galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Channel Type:
B52
Hole Pattern:
K06
Material Gauge:
12 Gauge
Product Height:
.81 in
Product Length Depth:
120 in
Product Weight:
14.4 lb
Product Width:
1.62 in
Department:
Electrical
Product Finish:
Pre-galvanized
Product Material:
Steel

B-LINE B52KO6-120GLV – Frequently Asked Questions

1) Is the B-Line B52 strut channel a half-height (shallow) channel or a full 1-5/8 inch deep channel?
The B52 is the shallow one. It measures .81 in high by 1.62 in wide, so it's the half-height version of the standard 1-5/8 inch strut profile. The 1.62 in opening face means standard 1-5/8 strut nuts, straps and fittings seat in it, but you lose the depth you'd get from a full 1-5/8 x 1-5/8 channel. For light pipe runs, conduit racks and ceiling trapeze where load is modest, the half-height saves space; for heavy trapeze spans, step up to a full-depth channel.
2) Can pre-galvanized strut channel be used outdoors or in a wet area?
Pre-galvanized is the finish here, which is a mill galvanized coating intended for dry indoor and protected service. Cut ends are left bare, so it is not the right choice for exterior exposure, wash-down, corrosive process areas or coastal work. For those, specify hot-dip galvanized after fabrication or stainless channel instead.
3) Will standard 1-5/8 strut nuts and clamps fit this B52 channel?
Yes. The channel face is 1.62 in wide, the standard 1-5/8 inch strut opening, so spring nuts, channel nuts, pipe clamps and end caps sized for 1-5/8 strut engage the returned lips normally. What changes with the B52 is depth, not the fitting interface: at .81 in high it's half the depth of a full-size channel, so deep-throat fittings that rely on the taller cavity won't seat.
4) What does the K06 hole pattern mean on this Eaton B-Line strut?
K06 is the slotted hole pattern punched in the back of the channel, so you can bolt the strut to structure anywhere along the run without drilling on site. It runs the full 120 in length of the piece. If your drawing calls for solid back (no holes) or a different punch spacing, K06 is not that part.
5) Is 12 gauge heavy enough for conduit trapeze hangers?
12 gauge steel is the standard commercial strut thickness, and this B52 channel is rolled from it. Combined with the half-height .81 in profile, it's aimed at conduit racks, light trapeze and equipment mounting rather than long unsupported spans carrying heavy pipe. Keep your support spacing tight and it handles typical EMT and small rigid runs; for long spans or heavy mechanical loads, use a full-depth channel or a back-to-back assembly.
How fast can I get the B-LINE B52KO6-120GLV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B52KO6-120GLV come with a warranty?
Absolutely. The B-LINE B52KO6-120GLV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B52KO6-120GLV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B52KO6-120GLV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!