Baldwin Estate 8031 Cylinder for Egress Handlesets

It will if those locks are also on Baldwin's C keyway. The 8031 is a 5-pin C-keyway cylinder, so it shares the keyway used across the Baldwin Estate line and can be keyed alike with other C-keyway Baldwin cylinders. Keying is an option at order time: pick Keyed Alike if you want one key to run the set, or Keyed Different if each opening should have its own key. If your existing cylinders are on a different keyway, they would need to be re-pinned to match rather than the other way around.

It is the key cylinder only, the part that goes into a Baldwin Estate egress handleset. You are not buying a handleset, a latch, or an escutcheon with it, so it only makes sense as a replacement for a damaged or worn cylinder, or as a rekey to bring an existing handleset onto a different key. If the handleset itself is the problem, you need the complete unit instead.

Projection is 7/10 inch off the face, with a 2 inch diameter body. That 2 inch diameter is the number to check first: it has to land inside the cylinder opening on your Estate egress handleset trim, and a smaller-collar cylinder will not fill the hole.

Two: 003 Polished Brass PVD and 190 Satin Black. Match it to the handleset it is going into, since the cylinder face sits proud of the trim at 7/10 inch projection and any mismatch is visible from the outside of the door.

Baldwin catalogues the 8031 as a residential cylinder in the Estate Series. For single-family and high-end residential entries that is exactly right. For a commercial storefront or a code-driven institutional opening, a Grade 1 mortise or rim cylinder in the relevant standard is the correct path instead. A property manager replacing a cylinder in an existing Baldwin Estate handleset on an apartment or condo unit door is still on solid ground, since the part is simply matching what is already installed.

Yes. Order them Keyed Alike and they ship pinned to a common key. All of them are 5-pin C keyway, so a locksmith can also bring them onto an existing house key later if the current cylinders are on the same keyway. Order Keyed Different if a rental unit or an outbuilding should stay on its own key.

Steel is the substrate, with the finish applied over it. The 003 option is Polished Brass PVD, which is a physical vapor deposition coating rather than raw brass, so it holds its color rather than living-finishing over time. If you want a patina that changes with use, this is not the part for it.