BEA 10LZRMICROSCAN2T LZR-MICRO...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,170.16
$2,693.83
BEA BEA 10LZRMICROSCAN2T - Sim Pair / Dual Egress Kit: (2) Left Sensor, (2) Right Sensor, (1) Hub, (2) Primary Harness, (2) Secondary Harness, (2) Door Control Harness, (2) Home Switch, (2) Door Loop / Cap Kit, (2) Sensor Spacers 10LZRMICROSCAN2T

BEA 10LZRMICROSCAN2T LZR-MICROSCAN T Dual Egress Laser Safety Sensor Kit

(No reviews yet) Write a Review

Model: BEA-10LZRMICROSCAN2T

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,170.16
$2,693.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 10LZRMICROSCAN2T LZR-MICROSCAN T Dual Egress Laser Safety Sensor Kit

Complete Dual Door Safety System with Advanced Laser Technology

The BEA 10LZRMICROSCAN2T is a comprehensive dual egress safety sensor kit featuring advanced Time-of-Flight laser technology for automatic swing doors. This complete system includes (2) left sensors, (2) right sensors, (1) hub, (2) primary harnesses, (2) secondary harnesses, (2) door control harnesses, (2) home switches, (2) door loop/cap kits, and (2) sensor spacers. The LZR-MICROSCAN T utilizes laser-based sensing to eliminate the limitations of infrared-based devices, providing background independence that eliminates nuisance detections caused by changing weather and floor conditions.

Professional Features & Benefits

  • Advanced Time-of-Flight Laser Technology: Eliminates limitations of infrared-based devices with superior accuracy and reliability in all environmental conditions.
  • Background Independence: Eliminates nuisance detections caused by changing weather and floor conditions for consistent performance.
  • Integrated Gyroscope Sensing: Senses door movement for accurate positioning and enhanced safety monitoring throughout door operation.
  • ANSI 156.10 Compliance: Provides adjustable pattern depths that exceed ANSI 156.10 8.2.2.3 standard requirements for comprehensive safety coverage.
  • 100% Coverage Capability: Offers complete coverage in all door states including fully open, fully closed, opening, and closing positions.
  • Complete Dual Egress Kit: Includes all necessary components for dual door installation including sensors, hub, harnesses, switches, and mounting accessories.
  • Door-Mounted Design: Stand-alone, door-mounted system designed specifically for automatic swing door applications.
  • Professional Installation Components: Includes sensor spacers and door loop/cap kits for precise installation and optimal performance.

Technical Specifications

  • Technology: LASER scanner, Time-of-Flight measurement
  • Detection Mode: Presence
  • Min. / Max. Door Width: 20 in - 48 in (per door leaf) (measured from leading edge to sensor LED)
  • Mounting Height: 75 in - 98 in (6.25 ft - 8.2 ft) (measured from finished floor to sensor LED)
  • Remission Factor: > 2%
  • Angular Resolution: 2.56 deg.
  • Test Body: 12 in (W) x 28 in (H) x 8 in (D) (per UL 325)
  • Emission Characteristics (IR laser): Wavelength 905 nm; Maximum Output Pulse Power 35 W (Class 1)
  • Supply Voltage: 12 - 30 VDC (15 W Class II)
  • Power Consumption: < 15 W
  • Response Time: Typ. 40 ms; Max. 80 ms
  • Output Rating: 4 electro-mechanic relays (galvanic isolated, polarity free)
  • Input Rating: 2 optocouplers (galvanic isolated, polarity free)
  • Test Input: 8 - 15 VDC
  • Temperature Range: -13 deg. F - 121 deg. F (-25 deg. C - 55 deg. C)
  • Degree of Protection: Hub: IP20 / NEMA 1 | Sensor: IP53 / NEMA 3
  • Humidity: 0 - 95% Non-condensing
  • Vibrations: < 2 G
  • Material: PC / ASA
  • Norm Conformance: EN 60825-1 Eye-safety class 1 IR laser (905 nm), UL325, UL6730

Installation & Operation

  1. Verify electrical requirements match available power supply and confirm system compatibility with existing automatic door operators.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount sensors in specified locations on door frames ensuring proper alignment and adequate clearance for door operation and sensor detection patterns.
  4. Route and connect all harnesses according to manufacturer wiring diagrams using the provided primary, secondary, and door control harnesses.
  5. Install hub unit and configure operational settings including detection pattern depths and sensitivity per application requirements.
  6. Connect home switches and door loop components according to system wiring specifications for complete door monitoring.
  7. Restore power and test all functions including sensor detection patterns, door position monitoring, gyroscope operation, and integration with door control systems.
  8. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Automatic Door Systems
  • Healthcare Facility Entrance Safety
  • Retail Store Automatic Door Protection
  • Educational Institution Safety Systems
  • Industrial Facility Access Control
  • Multi-Tenant Building Entrance Systems
  • Government and Municipal Building Safety

Why Choose BEA Quality?

BEA LZR-MICROSCAN T sensor systems deliver professional-grade safety performance with advanced Time-of-Flight laser technology and integrated gyroscope sensing for superior accuracy. The background-independent design ensures reliable operation in changing environmental conditions while exceeding ANSI safety standards. Engineered for demanding commercial automatic door applications where dependable safety monitoring is essential.

Product Specs

Product Type:
Presence Sensor
Series:
LZR-MICROSCAN T
Subcategory:
Sensors, Switches, Relays and Timers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Technology:
Laser
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA BEA-10LZRMICROSCAN2T – Frequently Asked Questions

1) Will the BEA LZR-MICROSCAN T work on a dual egress pair of automatic swing doors?
That's exactly what the 10LZRMICROSCAN2T kit is built for. It ships as a simultaneous pair / dual egress package: (2) left sensors, (2) right sensors, one hub, (2) primary harnesses, (2) secondary harnesses, (2) door control harnesses, (2) home switches, (2) door loop/cap kits and (2) sensor spacers. Both leaves run off the single hub, so you are wiring one system rather than two independent sensors. Each leaf gets a left and a right sensor, which is how the system holds coverage on both the swing side and approach side of each door.
2) What power supply does the BEA LZR-MICROSCAN T laser sensor need?
12 to 30 VDC, Class II, drawing under 15 W. That range covers most low voltage outputs on a commercial swing door operator, so in a lot of retrofits you can power it from the operator itself rather than pulling a separate supply. Confirm the operator's auxiliary output falls inside 12-30 VDC and can carry 15 W for each hub you are feeding.
3) Can the BEA LZR-MICROSCAN T be installed on an exterior entrance door?
The sensor head is rated IP53 / NEMA 3 and the operating range is -13 to 121 degrees F at 0 to 95 percent non-condensing humidity, so it handles a weather-exposed entrance head. The hub is only IP20 / NEMA 1, so that piece belongs indoors or inside a protected header, not out in the weather. Plan the hub location accordingly on an exterior opening.
4) Do I need to order anything else with the BEA 10LZRMICROSCAN2T besides the kit?
For the sensing side of a dual egress pair, no. Sensors, hub, all three harness types, home switches, door loop/cap kits and sensor spacers come in the box, which is the wiring hardware installers most often have to source separately. What the kit does not include is the automatic door operator or its power supply. Confirm the operator has a 12 to 30 VDC Class II output available, or bring your own supply in that range.
5) Should I use a laser scanner or an infrared presence sensor on an automatic swing door?
Laser time-of-flight is what you reach for when infrared keeps giving you false trips. Infrared devices read the background, so rain, snow, sun patches, wet mats and a changed floor finish all show up as detections. The LZR-MICROSCAN T measures time of flight instead, which makes it background independent, so a changed floor covering or weather at an exterior entrance does not retrigger it. On a clean interior opening with a stable floor, a simpler infrared device may be all the job needs. On exterior entrances, healthcare and retail vestibules where nuisance detection is the actual complaint, the laser is the fix.
6) Does the BEA LZR-MICROSCAN T keep detecting while the door is moving, or only when closed?
It covers all four door states: fully open, fully closed, opening and closing. An integrated gyroscope reads the door's own movement, so the sensor knows where the leaf is through the swing and keeps the detection pattern positioned rather than blanking out mid-cycle. That matters on a swing door where the hazard is the leaf sweeping toward someone standing in the arc.
7) What relay outputs and inputs does the BEA laser door sensor hub have for tying into a door operator?
Four electro-mechanical relays, galvanically isolated and polarity free, plus two optocoupler inputs on the same isolated, polarity-free basis. Polarity free means you are not chasing wire orientation at the operator terminal. There is also a test input taking 8 to 15 VDC for monitored operation with operators that pulse the sensor to self-check. Response time is typically 40 ms, 80 ms maximum.
8) Does the BEA LZR-MICROSCAN T mount on the door or on the header?
It is a door-mounted, stand-alone system for automatic swing doors. The sensor travels with the leaf, which is why the gyroscope is in there reading door movement, and it is also why mounting height is called out to the sensor LED rather than to a fixed header point. Sensor spacers are supplied to set the standoff on the door face.
9) Is the laser in the BEA LZR-MICROSCAN T safe over a public entrance in a hospital or school?
It is an eye-safety Class 1 IR laser under EN 60825-1, at 905 nm wavelength with a 35 W maximum output pulse power. Class 1 is the safe-under-all-normal-use classification, so there is no exposure control needed for people walking through the opening. The housing is PC/ASA.
How fast can I get the BEA BEA-10LZRMICROSCAN2T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA BEA-10LZRMICROSCAN2T come with a warranty?
Absolutely. The BEA BEA-10LZRMICROSCAN2T is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA BEA-10LZRMICROSCAN2T?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA BEA-10LZRMICROSCAN2T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!