Bobrick B-150C.MBLK Series Con...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$68.29
$43.29
Bobrick B-150C.MBLK Series Concealed Straight Grab Bar with Concealed Flange, Matte Black

Bobrick B-150C.MBLK Series Concealed Straight Grab Bar with Concealed Flange, Matte Black

(No reviews yet) Write a Review

Model: 15CX18.MBLK

In Stock (leaves warehouse same day if ordered before 3pm ET)

$68.29
$43.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick 150C.MBLK Series Concealed Straight Grab Bar with Concealed Flange, Matte Black

Features

  • 1-1/2″ (38mm) diameter stainless steel grab bar, powder coated matte black finish.
  • Available lengths:
  • 150Cx18.MBLK: 18″ (455mm)
  • 150Cx24.MBLK: 24″ (610mm)
  • 150Cx36.MBLK: 36″ (915mm)
  • 150Cx42.MBLK: 42″ (1065mm)
  • 150Cx48.MBLK: 48″ (1220mm)
  • Depth: 1-1/2″ (38mm)
  • Tube Diameter: 1-1/2″ (38mm)
  • Body Material: Type 304 stainless steel
  • Finish: Matte Black

Product Specs:

  • Finish : Matte Black
  • Configuration : Straight
  • Diameter : 1-1/2" (38mm)
  • Accessibility : ADA Compliant  

Resources:

Manufacturer Resources

Product Specs

Accessibility:
ADA Compliant
Product Type:
Grab Bars
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Grab Bars
Department:
Plumbing
Product Depth:
1-1/2"

Bobrick 15CX18.MBLK – Frequently Asked Questions

1) Which grab bar length do I need for a toilet side wall versus the rear wall?
For an accessible water closet, the side wall bar is normally the 42 inch (1065mm) 150Cx42.MBLK and the rear wall bar the 36 inch (915mm) 150Cx36.MBLK. The 18 and 24 inch bars are the short ones used vertically or at a lavatory and shower control, and the 48 inch (1220mm) covers a longer shower or ambulatory stall run. Confirm the length against the stall dimensions on your drawing before you order the set.
2) What lengths does the Bobrick 150C matte black grab bar come in?
Five lengths, ordered by model: 150Cx18.MBLK at 18 inches (455mm), 150Cx24.MBLK at 24 inches (610mm), 150Cx36.MBLK at 36 inches (915mm), 150Cx42.MBLK at 42 inches (1065mm), and 150Cx48.MBLK at 48 inches (1220mm). All five are the same straight bar in matte black, so a facility standardizing on one look can mix lengths across side walls, rear walls, and shower stalls without a finish mismatch.
3) What is a concealed flange grab bar and when would I use one instead of an exposed flange?
On the B-150C, the mounting flange is covered by a snap-on cover, so no fasteners show once it is installed. That is the version specified where the restroom is public-facing or vandal exposure matters, since there are no visible screw heads to pick at, and it is the cleaner look for a hotel, restaurant, or office washroom. An exposed-flange bar shows its fasteners and is the usual choice back-of-house where appearance is not driving the spec.
4) Will a matte black grab bar hold up in a commercial restroom, or will the finish wear off?
The bar is Type 304 stainless steel underneath, powder coated matte black. The 304 substrate is what handles the wet, humidity, and cleaning chemistry of a commercial washroom, and the black is a coating on top of it rather than a plated layer. Bobrick publishes care and maintenance guidance for its finishes; follow it and skip abrasives and chlorine-based cleaners, which is what takes powder coat off any bar.
5) I have chrome or satin stainless grab bars now. Will the matte black 150C match the mounting I already have?
The B-150C.MBLK is the same straight, concealed flange, 1-1/2 inch (38mm) bar body as Bobrick's stainless 150C, just powder coated matte black, so it installs into the same wall condition and sits the same 1-1/2 inches (38mm) off the wall. What it will not do is match your existing bars visually. If you are swapping one bar in a restroom of satin stainless, expect a deliberate contrast, not a blend, so most facilities change a full room at a time.
6) Can I use the Bobrick 150C.MBLK in a shower or wet area?
Yes. Type 304 stainless is the standard material for wet washroom environments, and the 1-1/2 inch (38mm) tube is the grip diameter used on shower and tub bars. The 48 inch (1220mm) and 36 inch (915mm) bars are the ones that cover a typical shower wall run, with an 18 or 24 inch bar at the control end.
How fast can I get the Bobrick 15CX18.MBLK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 15CX18.MBLK come with a warranty?
Absolutely. The Bobrick 15CX18.MBLK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 15CX18.MBLK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 15CX18.MBLK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!