Bobrick B-251-4 WingIt Handica...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$114.70
$82.69
Bobrick B-251-4 WingIt Handicap Grab Bar Fastener Mounting Kit

Bobrick B-251-4 WingIt Handicap Grab Bar Fastener Mounting Kit

(No reviews yet) Write a Review

Model: 251-4
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$114.70
$82.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-251-4 WingIt Handicap Grab Bar Fastener Mounting Kit

For 2 1/2″ and 3 1/2″ (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4″ to 1 1/2″ (6 to 38mm) thick. Corrosion resistant stainless steel. One required for each flange. Fastener will support 300 lbs (136 kg) load. WingItTM is a trademark of WingIt innovations, LLC.

Features

  • Corrosion Resistant Stainless Steel
  • For walls with a min. of 0.625″ (16mm) thick painted or tiled drywall.
  • No need to open and reconstruct walls and fastener will support 300 lb load

Product Specs

  • Accessibility : ADA Compliant
  • Parts and Accessories : Parts and Accessories

Resources

Manufacturer Resources

Product Specs

Product Type:
Mounting Kits
Features:
ADA Compliant
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Parts and Accessories
Product Material:
Stainless Steel
Department:
Plumbing
Parts and Accessories Type:
Mounting Hardware
Application:
Washroom Accessory

Bobrick 251-4 – Frequently Asked Questions

1) Can I mount an ADA grab bar with the Bobrick B-251-4 WingIt kit without opening up the wall to add blocking?
That is exactly what the WingIt fastener is for. It installs through the finished wall surface into a hollow wall cavity, so there is no need to open and reconstruct the wall to add wood blocking or backing plate. Each fastener will support a 300 lb (136 kg) load.
2) How many WingIt B-251-4 fasteners do I need for one grab bar?
One fastener per flange. A standard straight grab bar has two flanges, so that is two fasteners; a three-flange or L-shaped bar takes three. Order by flange count, not by bar.
3) Will the WingIt grab bar fastener work in my wall? What cavity depth and drywall thickness does it need?
The B-251-4 is made for hollow walls with a cavity of 2-1/2 inch or 3-1/2 inch (65 and 90mm) or deeper, and finished wall surfaces from 1/4 inch to 1-1/2 inch (6 to 38mm) thick. The surface itself needs to be at least 0.625 inch (16mm) of painted or tiled drywall. A shallower cavity or a thinner wall board is outside what this fastener is rated for.
4) Can I use the Bobrick WingIt fastener on a solid concrete, block, or tile-over-mortar wall?
No. The B-251-4 is a hollow wall fastener, specified for wall cavities of 2-1/2 or 3-1/2 inches (65 and 90mm) or deeper behind a finished surface. Solid masonry, concrete, or a wall with no cavity behind the board needs a masonry anchor instead.
5) Does the B-251-4 WingIt fastener meet the 250 lb ADA grab bar load requirement?
The fastener is listed as ADA compliant and each one will support a 300 lb (136 kg) load, which is above the 250 lb point load figure written into the ADA accessibility standards for grab bars.
6) Will the WingIt fastener corrode in a wet shower or a high-humidity restroom?
The B-251-4 is stainless steel and specified as corrosion resistant, which is why it gets used behind tiled shower and bathroom walls in hotels, healthcare, and multi-family. The kit ships in a satin finish.
7) Is the B-251-4 a grab bar, or just the anchors?
Just the anchoring hardware. The B-251-4 is a WingIt fastener mounting kit for securing grab bar flanges to a hollow wall. The grab bar itself is ordered separately, and you need one fastener for each flange on that bar.
How fast can I get the Bobrick 251-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 251-4 come with a warranty?
Absolutely. The Bobrick 251-4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 251-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 251-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!