You may also like
Bobrick B-5892 Grab Bar Rail with Padded Back Bar
Grab bar shall be Type-304 stainless steel with satin finish. Grab bar shall have 18-gauge 1.2mm (18-gauge) wall thickness and 30mm (1-1/4″) outside diameter. Clearance between the grab bar and wall shall be 210mm (8-1/4″). Concealed mounting flanges shall be 3mm (11-gauge) stainless steel plate, 50 x 80mm (2″ x 3-1/8″), and equipped with six screw holes for attachment to wall. Flange covers shall be 0.8mm (22-gauge) stainless steel, 85mm (3-1/4″) diameter, and shall snap over mounting flanges to conceal mounting screws. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall be equipped with a 360 x 160 x 40mm (14-1/4″ x 6-3/8″ x 1-5/8″) white polyurethane integral foam backrest.
Product Specs:
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Parts and Accessories
- Product Diameter:
- 1-1/4"
- Product Material:
- Type-304 Stainless Steel
- Product Category:
- Grab Bar
- Department:
- Plumbing
- Parts and Accessories Type:
- Escutcheon
- Application:
- Washroom Accessory
Bobrick 5892 – Frequently Asked Questions
1) What does the padded back bar on the Bobrick B-5892 grab bar do, and how big is the pad?
The B-5892 is a grab bar rail that doubles as a backrest at a water closet. The pad is white polyurethane integral foam, 360 x 160 x 40mm (14-1/4 x 6-3/8 x 1-5/8 inches), mounted to the bar itself so the user has something to lean back against rather than just something to grip.
2) How far does the Bobrick B-5892 stand off the wall?
Clearance between the bar and the finished wall is 210mm (8-1/4 inches). That is a deep projection compared with a plain wall-mounted grab bar, because the padded backrest sits between the bar and the wall. Check your stall depth and the clear floor space behind the fixture before ordering.
3) What wall backing do I need for the Bobrick B-5892 back bar?
Each end of the bar terminates in a concealed mounting flange of 3mm (11-gauge) stainless plate, 50 x 80mm (2 x 3-1/8 inches), with six screw holes per flange. With a backrest bar the load is cantilevered off the wall, so plan on solid blocking or a steel plate behind the finish at both flange locations and fasteners suited to that substrate. The flanges take snap-on 0.8mm (22-gauge) stainless covers, 85mm (3-1/4 inches) in diameter, that hide the screws once it is set.
4) Is the Bobrick B-5892 grab bar 1-1/4 inch or 1-1/2 inch tube?
It is 1-1/4 inch outside diameter tube, which is the smaller of the two common grab bar gripping sizes. If your facility has standardized on 1-1/2 inch bars elsewhere, this one will not visually match them.
5) What material and finish is the Bobrick B-5892, and will it hold up in a public restroom?
Type-304 stainless steel with a satin finish, in 18-gauge (1.2mm) wall thickness. Satin 304 is the standard specification for high-traffic commercial and institutional washrooms because it resists corrosion from cleaning chemicals and hides wear and fingerprints better than a polished finish. Satin is the only finish it is offered in.
6) Are the mounting screws on the Bobrick B-5892 visible after installation?
No. The bar ends pass through the concealed mounting flanges and are heliarc welded to them, making the assembly one structural unit, and 3-1/4 inch stainless flange covers snap over each flange to hide the six mounting screws. You get a clean escutcheon face with no exposed fasteners.
7) Do I have to order the backrest pad separately for the Bobrick B-5892?
No, the white polyurethane integral foam backrest is part of the bar as supplied, along with the two concealed flanges and their snap-on cover plates. Mounting screws suited to your wall construction are the installer's responsibility.
How fast can I get the Bobrick 5892 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 5892 come with a warranty?
Absolutely. The Bobrick 5892 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 5892?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 5892 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.