Bobrick B-540 Surface-Mounted ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$198.60
$177.17
Bobrick B-540 Surface-Mounted Multi Roll Toilet Tissue Dispenser and Utility Shelf with Upward Return Front Edge

Bobrick B-540 Surface-Mounted Multi Roll Toilet Tissue Dispenser and Utility Shelf with Upward Return Front Edge

(No reviews yet) Write a Review

Model: 540
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$198.60
$177.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-540 Surface-Mounted Multi Roll Toilet Tissue Dispenser and Utility Shelf with Upward Return Front Edge

Features

  • Type-304, 14 gauge stainless steel with satin finish*. Shelf shall have 1/4″ (6mm) upward return front edge.
  • Toilet Tissue Dispenser shall have 3/4″ (19mm) diameter Post
  • . Dispenser bar shall be 3/8″ (9.5mm) diameter, secured to Post with a concealed set screw.
  • Retaining pin shall be 1/4″ (6.4mm) diameter and pressed into Dispenser bar.
  • Wall Plate equipped with two screw holes for attachment. Post and Wall Plate are to be securely welded as one piece.
  • Dispenser Bar shall hold standard-core toilet tissue rolls up to 4-1/2″ (110mm) diameter (500 sheets).

Product Specs

  • Finish : Satin-Finish Stainless Steel
  • Mounting Options : Surface Mounted
  • Tissue Type : Standard Roll - Double

Resources

Manufacturer Resources

Product Specs

Capacity:
Double Roll
Dispenser Type:
Open
Installation Type:
Wall Mounted
Product Type:
Toilet Paper Dispenser
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Toilet Paper Dispenser
Product Material:
Stainless Steel
Department:
Plumbing
Product Depth:
3 3/4"

Bobrick 540 – Frequently Asked Questions

1) Will the Bobrick B-540 hold jumbo toilet paper rolls, or only standard rolls?
Standard-core rolls only, up to 4-1/2 inch (110mm) diameter, which is the 500-sheet size. The dispenser bar holds two of them. If your building runs jumbo-roll or coreless tissue, the B-540 is the wrong dispenser for that program.
2) How far does the Bobrick B-540 tissue dispenser and shelf stick out from the wall?
Projection is 3-3/4 inches off the wall face. That matters in a narrow stall or beside a water closet where clearance to the fixture is tight, since the unit is surface mounted and the full depth sits proud of the finished wall.
3) Can the B-540 be installed on an existing tiled or block restroom wall without cutting in a recess?
Yes. It is a surface-mounted unit, so no wall cavity or recess is needed. The wall plate has two screw holes for attachment, and the post and wall plate are welded as one piece. On tile, block, or concrete you supply anchors suited to the substrate; the two-hole plate is what you are laying out.
4) Does the B-540 have a cover or lock, or are the rolls exposed?
The rolls are exposed. The B-540 is an open dispenser on a bar, with no hood, cover, or lock. In a facility where tissue theft is a problem, or where a controlled-delivery program is in place, you want an enclosed or locking dispenser instead. Where restocking speed and simple maintenance matter more, the open bar wins because anyone can reload it in seconds.
5) Is the Bobrick B-540 durable enough for a high-traffic public or school restroom?
It is built from Type-304 stainless steel in 14 gauge, which is heavy for a washroom accessory, and the post is welded to the wall plate as a single piece rather than bolted together. The dispenser bar is 3/8 inch diameter set into a 3/4 inch diameter post with a concealed set screw, so there is no exposed fastener to back out or pick at. That construction is what makes it a common choice for schools, transit, and other abuse-prone restrooms.
6) Do I still need a separate toilet paper holder if I install the Bobrick B-540 shelf?
No. The B-540 combines both: a two-roll tissue dispenser and a utility shelf in one surface-mounted unit. The shelf gives a place for a phone, keys, or a purse, and it has a 1/4 inch (6mm) upward return on the front edge to keep items from sliding off. One unit, one set of anchors, one item to spec.
7) What keeps the rolls from being pulled off the bar on the B-540?
A retaining pin, 1/4 inch (6.4mm) diameter, pressed into the dispenser bar. That is the detail that separates it from a plain open bar in a public restroom, where whole rolls otherwise walk off. The bar itself is held into the post by a concealed set screw, so the bar is not coming out either without a hex key.
8) What finishes does the Bobrick B-540 come in?
Two: satin stainless steel and matte black. The satin stainless is the standard 14 gauge Type-304 stainless body, which is what most institutional restrooms standardize on; matte black is the option when the spec calls for dark accessories to match faucets and grab bars.
9) Can I standardize the B-540 across a whole building of restrooms?
It suits fleet standardization well: one surface-mounted footprint with a two-hole wall plate, the same 3-3/4 inch projection at every opening, and satin stainless that matches the rest of a typical Bobrick stainless accessory package. Pick one finish, satin stainless or matte black, and the layout dimension and anchor pattern repeat at every stall.
10) Will the Bobrick B-540 rust in a humid or frequently washed-down restroom?
The body is Type-304 stainless steel, the grade used throughout commercial washroom accessories for exactly this reason. It stands up to constant humidity and routine wet cleaning. Avoid abrasive pads and chlorinated cleaners on the satin finish, which will dull it and can pit stainless over time.
How fast can I get the Bobrick 540 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 540 come with a warranty?
Absolutely. The Bobrick 540 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 540?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 540 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!