Boshart 0924 FPT/Slip Union PV...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.39
Boshart 0924 FPT/Slip Union PVC Ball Valve, PTFE Seat

Boshart 0924 FPT/Slip Union PVC Ball Valve, PTFE Seat

(No reviews yet) Write a Review

Model: 0924-05

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Boshart 0924 FPT/Slip Union PVC Ball Valve, PTFE Seat

The Boshart 0924 is a PVC ball valve built with an FPT threaded connection on one end and a slip union on the other, giving installers a fast, serviceable shut-off point for rough-in plumbing runs. Available in sizes ranging from 1/2" through 2" (1/2", 3/4", 1", and 2"), the 0924 lets contractors and distributors stock one dependable valve style across a range of common rough-in and repair applications. Every size in the family shares the same PVC body construction, PTFE seat, and EPDM O-ring seal for consistent shut-off performance. This configuration is well suited for water supply lines, swimming pool plumbing, and irrigation systems where a dependable, corrosion-resistant valve is needed behind the wall or below grade. Boshart ships these valves 24 to a case, making the 0924 a practical stocking item for plumbing contractors and distributors handling repeat rough-in and repair work.

Key Features

  • Size Range: Available from 1/2" through 2" (1/2", 3/4", 1", 2") to cover common rough-in and repair sizing needs.
  • Durable Construction: PVC valve body resists corrosion across the full size range, making it a strong choice for water supply, pool, and irrigation plumbing.
  • Connection Type: FPT threaded connection on one end and a slip union on the other end for straightforward installation and future serviceability, consistent across all sizes.
  • Seat & Seal: PTFE seat combined with an EPDM O-ring seal supports consistent ball-to-seat contact for reliable open/close operation on every size offered.
  • Union Serviceability: The slip union end allows the valve to be removed from the line without cutting surrounding pipe, simplifying repairs and future maintenance.
  • Application Versatility: Suitable for general water supply lines, swimming pool circulation plumbing, and irrigation system shut-off points.
  • Case Packaging: Packaged 24 per case for efficient stocking and job-site distribution.

Technical Specifications

  • Country of Origin: CHN
  • Prop 65 Warning: No
  • Packaging: 24 ea per case
  • Size Options: 1/2", 3/4", 1", 2"

Typical Applications

  • Residential and Commercial Water Supply Shut-Off
  • Swimming Pool Circulation Plumbing
  • Irrigation System Shut-Off Valves
  • Rough-In Plumbing Repair and Retrofit Work
  • New Construction PVC Piping Systems

Why Boshart?

Boshart builds plumbing components for the trade, and the 0924 PVC ball valve reflects that focus with a PVC body, PTFE seat, and EPDM O-ring seal designed to hold up in water supply, pool, and irrigation applications across its full 1/2" through 2" size range. The FPT/slip union configuration gives plumbers a valve that installs quickly and can be serviced later without disturbing the surrounding pipe run. For contractors and distributors who need a dependable shut-off valve for rough-in and repair work in multiple sizes, the Boshart 0924 is a straightforward, code-friendly choice packaged for job-site efficiency.

Manufacturer Resources

Product Specs

Prop 65 Warning:
No
list_batch:
BOS-20260923
Product Type:
Ball Valve
Connection Type:
FPT x Slip Union
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Material:
PVC
Product Group:
Fitting

Boshart 0924-05 – Frequently Asked Questions

1) What connections does the Boshart 0924 PVC ball valve have on each end?
One end is FPT (female pipe thread) and the other is a slip union socket that solvent welds to PVC pipe. So it drops in where you are transitioning from a threaded fitting or nipple to a glued PVC run, with no adapter needed. The union nut on the slip end means the valve body can be backed off the line later without cutting pipe.
2) Can the Boshart 0924 valve be replaced without cutting out the surrounding PVC pipe?
That is the reason to spec it. The slip union end unthreads so the valve body lifts out of the line, and the FPT end unscrews from its mating fitting. You replace the valve without sawing into the glued pipe on either side, which is what makes it worth using at a rough-in shutoff point you expect to service.
3) What is the difference between the Boshart 0924 PVC ball valve and the SharkBite SBBV54 ball valve?
Both are rough-in shutoff ball valves, but they connect to the pipe very differently. The Boshart 0924 has a PVC body with an FPT threaded end on one side and a slip union on the other, so it is solvent-welded to PVC pipe on one end and threaded on the other. The SharkBite SBBV54 is a ball valve for rough-in shutoff applications from the SBBV54 series. If the run is PVC and you want the joint made with cement plus a serviceable union, the 0924 is the configuration that matches; if the run is being joined by SharkBite's own connection method, the SBBV54 is the one to look at.
4) I need a shutoff valve for a rough-in that is not PVC pipe - what should I use instead of the Boshart 0924?
The 0924 is built for PVC systems: PVC body, slip union end meant to be solvent-welded, FPT thread on the opposite end. On a non-PVC rough-in, look at the SharkBite SBBV54 ball valve, which is offered for rough-in shutoff applications. Keep the 0924 where the line is PVC - water supply, pool circulation, and irrigation runs are where its body material and union end earn their keep.
5) Can I use a PVC ball valve like this on a swimming pool circulation line?
Yes. The 0924 is built for water supply, pool circulation, and irrigation service. The PVC body resists corrosion in chlorinated and buried service, and the PTFE seat with EPDM O-ring seal handles repeated open and close cycles on a pump line.
6) Is a PVC ball valve or a push-to-connect brass valve the better choice for a rough-in shutoff?
It depends on the pipe you are tying into. The Boshart 0924 is PVC with an FPT end and a solvent weld slip union end, which suits PVC supply, pool, and irrigation lines, including below grade where corrosion resistance matters. If you are working in copper, PEX, or CPVC behind a wall, a push-fit valve such as the SharkBite SBBV54 makes more sense, since the 0924 gives you no mechanical connection to those pipe types.
7) Will a PTFE seat and EPDM O-ring hold up in an underground irrigation shutoff?
That combination is what Boshart specifies on the 0924 for buried and behind-wall service. PTFE gives a low-friction ball-to-seat contact so the handle does not seize after sitting open for a season, and the EPDM O-ring seals the stem. Paired with the PVC body, there is nothing in the wetted path to corrode in a valve box.
8) Can the SharkBite SBBV54 be swapped in for a Boshart 0924 on a pool or irrigation line?
Not as a direct one-for-one. The Boshart 0924 terminates FPT on one end and slip union on the other, so it is sized and prepped for PVC pipe and threaded fittings, and the union lets you pull the valve without cutting the surrounding pipe. The SharkBite SBBV54 is a ball valve for rough-in shutoff applications and uses its own connection style, so the pipe ends would have to be prepared differently. Confirm the end connections against the pipe already in the ground before ordering either one.
9) For standardizing shutoff valves across a property in 1/2 inch through 2 inch, which valve covers the range?
The Boshart 0924 is offered in 1/2 inch, 3/4 inch, 1 inch, and 2 inch, all sharing the same PVC body and FPT x slip union configuration, so a facility can stock one valve style across common rough-in sizes. The SharkBite SBBV54 is the other rough-in shutoff ball valve to weigh, in its SBBV54 series. Pick based on the pipe material you are standardizing on rather than the valve alone.
10) Does the Boshart 0924 PVC ball valve carry a Prop 65 warning?
No Prop 65 warning applies to the 0924. It is made in China and supplied through the plumbing line, so it ships without that labeling requirement.
11) How are Boshart 0924 ball valves packaged for stocking?
They ship 24 each per case, one size per case. For a distributor or a plumbing shop carrying rough-in and repair inventory, that lets you stock the common sizes by the case and pull singles to the truck.
How fast can I get the Boshart 0924-05 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart 0924-05 come with a warranty?
Absolutely. The Boshart 0924-05 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart 0924-05?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Boshart 0924-05 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!