You may also like
Bridle Ring 2 MS &Saddle St-Zn (10 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics MBR200WH – Frequently Asked Questions
1) Will the MBR200WH bridle ring screw into wood or does it need a threaded hole?
It comes with a machine screw, not a wood screw or lag. Machine screw threads need a mating tapped hole, insert, or nut, so this version suits beam clamps, strut nuts, and pre-tapped steel. For wood framing or a drilled-and-anchored install you want a bridle ring with a wood screw or lag thread instead.
2) What is a bridle ring used for, and what does the Metallics MBR200WH do?
A bridle ring is a loop-shaped support that carries low voltage and communications cable along a structure so the cable isn't draped over pipe or ceiling grid. The MBR200WH is a 2 inch ring with a machine screw and saddle, so the screw threads into an existing tapped hole or insert and the saddle spreads the bearing surface at the mount point. Cable drops into the ring rather than being pulled through conduit.
3) Is the Metallics MBR200WH bridle ring suitable for damp or outdoor locations?
It's steel with a zinc finish. Zinc plating handles dry interior commercial work, plenums, and telecom rooms. For wet, corrosive, or exterior exposure, step up to a hot dip galvanized or stainless ring rather than zinc plated steel.
4) What size cable bundle fits a 2 inch bridle ring?
The MBR200WH ring opening is 2 inches, which is the common size for a moderate bundle of Cat5e/Cat6 or coax drops. Fill guidance matters here: overstuffing a ring crushes jackets and distorts pair geometry, so if your bundle is approaching the full 2 inch opening, add a second ring run rather than packing one.
5) How many bridle rings come in a pack of the Metallics MBR200WH?
Ten pieces per pack. On a cable pull you're typically setting rings every few feet along the run, so one pack covers a short run or a single room drop; order multiples for a full floor.
6) What part number do I order for the Metallics 2 inch machine screw bridle ring?
Order Metallics MBR200WH. That single MPN covers the 2 inch zinc plated steel bridle ring with machine screw and saddle, sold ten to a pack.
How fast can I get the Metallics MBR200WH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MBR200WH come with a warranty?
Absolutely. The Metallics MBR200WH is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MBR200WH?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MBR200WH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.