Briscon 4S2A-100 Aluminum 2-Ho...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.71
Briscon 4S2A-100 Aluminum 2-Hole Service Entrance Cable Strap for 2/3 Cable, 100-Pack

Briscon 4S2A-100 Aluminum 2-Hole Service Entrance Cable Strap for 2/3 Cable, 100-Pack

(No reviews yet) Write a Review

Model: 4S2A-100

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.71
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Briscon 4S2A-100 Aluminum 2-Hole Service Entrance Cable Strap for 2/3 Cable, 100-Pack

The Briscon 4S2A-100 is an aluminum two hole strap designed to secure 2/3 service entrance cable. Fastening through two mounting holes, one on each side of the cable, gives a firm, balanced hold that resists shifting along exterior walls and framing. The aluminum construction pairs well with aluminum SE cable and suits outdoor service runs. It is the aluminum counterpart to Briscon's galvanized steel 4S2-100 two hole strap for the same 2/3 cable size. Each box contains 100 straps, a practical quantity for electricians handling service upgrades, new services and feeder work across multiple jobs.

Key Features

  • Two Hole Design: Fastens on both sides of the cable for a firm, balanced hold.
  • Aluminum Construction: Aluminum strap well suited to service entrance cable runs.
  • Sized for 2/3 Cable: Matched to 2/3 service entrance cable.
  • Service Entrance Strap: Purpose built for securing SE cable.
  • 100-Pack: Box of 100 straps for contractor stock.
  • Galvanized Counterpart: Briscon also makes the 4S2-100 two hole strap in galvanized steel for the same 2/3 cable size.

Technical Specifications

  • Product Type: Two hole service entrance cable strap
  • Part Number: 4S2A-100
  • Material: Aluminum
  • Cable Size: 2/3 service entrance cable
  • Mounting: Two hole
  • Pack Quantity: 100 per box

Typical Applications

  • Securing 2/3 SE cable on exterior walls
  • Service upgrades and new service installations
  • Meter base and service mast cable runs
  • Feeder cable to subpanels and outbuildings
  • Residential and light commercial service work

Why Briscon?

Briscon manufactures a wide variety of one and two hole cable straps in galvanized steel, aluminum and stainless steel for most cable and conduit fastening needs. The line is now part of nVent Gardner Bender, which unites the Gardner Bender, Sperry Instruments, Bergen and Briscon brands, and nVent states that the quality, specs, performance and reliability remain exactly the same as the name and packaging change. The 4S2A-100 is the aluminum version of Briscon's two hole service entrance strap for 2/3 cable.

Manufacturer Resources

Product Specs

list_batch:
BRI-20260924
Product Type:
Cable Strap
Configuration:
2-Hole
Department:
Electrical
Product Subgroup:
Electrical Fasteners
Product Material:
Aluminum
Pack size (unit):
100

Briscon 4S2A-100 – Frequently Asked Questions

1) Will the Briscon 4S2A-100 strap fit 2/3 service entrance cable?
Yes. The 4S2A-100 two hole strap is sized specifically for 2/3 SE cable, so it seats the oval cross section of that size without pinching or leaving slack. If you are running a different SE size, this strap is not the one to use.
2) Should I use an aluminum strap or a galvanized steel strap on an SE cable run?
For aluminum SE cable on an exterior wall, the aluminum 4S2A-100 keeps the fastener and the cable in the same metal family, which is why it is specified for outdoor service runs. If you want a steel strap for the same 2/3 cable size, Briscon makes the 4S2-100 in galvanized steel. Same two hole pattern, different material.
3) Why choose a two hole strap over a one hole strap for service entrance cable?
A two hole strap fastens on both sides of the cable, one screw left and one right, so the cable cannot rock or creep along the wall under wind load or thermal movement. That balanced hold is what you want on a vertical service run up to a meter base or mast. One hole straps pivot on a single fastener and are better suited to lighter conduit and cable work where movement is not a concern.
4) Are screws or fasteners included with these SE cable straps?
The box contains the 100 aluminum straps only. Each strap has two mounting holes and you supply the fasteners appropriate to the substrate, whether that is wood framing, siding, masonry or block. Order those separately so the job is not held up.
5) Can I use the 4S2A-100 strap to secure feeder cable to a detached garage or subpanel?
Yes, as long as the cable is 2/3 SE. Feeder runs to subpanels and outbuildings are one of the stated uses for this strap, along with meter base and service mast runs and exterior wall work on residential and light commercial services.
6) How many straps come in a box of Briscon 4S2A-100?
100 straps per box. That is stock-up quantity for a contractor doing service upgrades and new services rather than a single-job blister pack, and the part number itself carries the 100 count.
7) Is Briscon the same brand as nVent Gardner Bender now?
Briscon is part of nVent Gardner Bender, which brought Gardner Bender, Sperry Instruments, Bergen and Briscon under one name. nVent states the quality, specs, performance and reliability are unchanged, so a 4S2A-100 arriving in newer packaging is the same strap you have been buying.
8) What part number do I order for the Briscon aluminum two hole SE strap for 2/3 cable?
Order MPN 4S2A-100. That is the aluminum two hole service entrance strap for 2/3 cable in the 100 count box. The galvanized steel equivalent drops the A: 4S2-100.
How fast can I get the Briscon 4S2A-100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Briscon 4S2A-100 come with a warranty?
Absolutely. The Briscon 4S2A-100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Briscon 4S2A-100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Briscon 4S2A-100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!