Briscon SN-300-B-SS-100 Stainless Steel Cable Staple, 13/16" x 1-3/8", 100-Pack
The Briscon SN-300-B-SS-100 is a 13/16" wide by 1-3/8" long cable staple made from stainless steel, sized for larger cable where corrosion resistance matters, such as treated lumber and exterior framing. The SN-300 size holds 8/3 armored cable, 8/3 metal clad cable, 8/2 through 6/3 service entrance (SE) cable, 8/3 through 6/3 NM cable, and 10/3 UF cable. A recessed head protects the cable jacket and sharp, burr free legs drive straight without splitting the wood. Sold in a 100-pack box and made in the USA.
Key Features
- Low Carbon Steel: Plain low carbon steel staple for interior wood framing.
- Recessed Head: The recessed head drives quickly and helps protect the cable jacket and insulation.
- Straight Driving Legs: Pointed, burr free legs with sharp tips start easily and drive straight to help prevent splitting the wood.
- Contractor Preferred Length: Leg length engineered to the length contractors prefer for secure holding in framing.
- Clean Handling: Virtually oil free for cleaner handling on the job.
- Hammer Driven: Designed to be driven into wood with a hammer; no special tool required.
- Made in the USA: Manufactured in the United States.
Technical Specifications
- Product Type: Cable staple
- Part Number: SN-300-B-SS-100
- Material: Stainless steel
- Size: 13/16" W x 1-3/8" L
- Pack Quantity: 100 per box
- Cable Fit: 8/3 armored cable, 8/3 metal clad cable, 8/2 through 6/3 service entrance (SE) cable, 8/3 through 6/3 NM cable, and 10/3 UF cable
- Installation: Hammer driven into wood
- Origin: Made in the USA
Typical Applications
- Securing SE and large NM cable to treated or exterior lumber
- Service entrance cable runs on outbuildings and decks
- Range and dryer circuit cable runs
- Damp, outdoor and coastal locations
- Remodel and new construction rough in
Why Briscon?
Briscon has built cable staples and fasteners for the electrical trade for decades, and the line is now part of nVent Gardner Bender, which unites the Gardner Bender, Sperry Instruments, Bergen and Briscon product lines. The name and packaging are changing, but nVent states that the quality, specs, performance and reliability of these staples remain exactly the same. The SN-300 in stainless steel brings Briscon's service cable staple to exterior and treated lumber installs.
Manufacturer Resources
Product Specs
- list_batch:
- BRI-20260924
- Product Type:
- Cable Staple
- Department:
- Electrical
- Product Subgroup:
- Electrical Fasteners
- Product Size:
- 13/16"
- Pack size (unit):
- 100