Briscon SN-100-IB-100 Yellow I...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.07
Briscon SN-100-IB-100 Yellow Insulated Cable Staple, 9/16" x 1-1/4", 100-Pack

Briscon SN-100-IB-100 Yellow Insulated Cable Staple, 9/16" x 1-1/4", 100-Pack

(No reviews yet) Write a Review

Model: SN100IB100

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Briscon SN-100-IB-100 Yellow Insulated Cable Staple, 9/16" x 1-1/4", 100-Pack

The Briscon SN-100-IB-100 is a 9/16" wide by 1-1/4" long insulated cable staple made from zinc-plated, low carbon steel with a yellow LDPE plastic insulator. The insulator sits between the staple and the cable to protect the jacket, while the sharp, burr free legs drive straight into wood without splitting it. This size holds 14/2 through 10/3 armored and MC cable, 12/3 through 10/3 NM cable, 14/3 flat NM cable, and 14/2 through 12/3 UF cable. Sold in a 100-pack box and made in the USA.

Key Features

  • Zinc Plated Steel: Zinc plated low carbon steel resists rust and corrosion.
  • LDPE Insulator: Yellow LDPE plastic insulator helps protect the cable jacket.
  • Recessed Head: The recessed head drives quickly and helps protect the cable jacket and insulation.
  • Straight Driving Legs: Pointed, burr free legs with sharp tips start easily and drive straight to help prevent splitting the wood.
  • Contractor Preferred Length: Leg length engineered to the length contractors prefer for secure holding in framing.
  • Clean Handling: Virtually oil free for cleaner handling on the job.
  • Hammer Driven: Designed to be driven into wood with a hammer; no special tool required.
  • Made in the USA: Manufactured in the United States.

Technical Specifications

  • Product Type: Insulated cable staple
  • Part Number: SN-100-IB-100
  • Material: Zinc plated low carbon steel
  • Insulator: Yellow LDPE plastic
  • Size: 9/16" W x 1-1/4" L
  • Pack Quantity: 100 per box
  • Cable Fit: 14/2 through 10/3 armored and MC cable, 12/3 through 10/3 NM cable, 14/3 flat NM cable, and 14/2 through 12/3 UF cable
  • Installation: Hammer driven into wood
  • Origin: Made in the USA

Typical Applications

  • Securing NM (Romex) cable to studs, joists and rafters
  • Residential new construction rough in
  • Remodel and retrofit wiring in wood framed walls
  • Fastening AC, MC and UF cable runs to wood members
  • Electrical contractor and maintenance stock

Why Briscon?

Briscon has built cable staples and fasteners for the electrical trade for decades, and the line is now part of nVent Gardner Bender, which unites the Gardner Bender, Sperry Instruments, Bergen and Briscon product lines. The name and packaging are changing, but nVent states that the quality, specs, performance and reliability of these staples remain exactly the same. The yellow insulator marks the 9/16" size so it is easy to pick out of a mixed pouch.

Manufacturer Resources

Product Specs

list_batch:
BRI-20260924
Product Type:
Cable Staple
Configuration:
Insulated
Product Finish:
Zinc-Plated
Department:
Electrical
Product Subgroup:
Electrical Fasteners
Product Material:
Zinc-Plated Steel
Pack size (unit):
100
Product Group:
Hangers, Supports & Fasteners

Briscon SN100IB100 – Frequently Asked Questions

1) Will a 9/16 inch insulated staple hold 12/2 Romex?
No. The Briscon SN-100-IB-100 at 9/16 inch wide is sized for 12/3 through 10/3 NM cable, 14/3 flat NM, 14/2 through 10/3 armored and MC, and 14/2 through 12/3 UF. Round 12/2 NM is smaller than that range, so it would sit loose under this staple. For standard 12/2 or 14/2 round Romex you want the narrower insulated staple size instead.
2) What cable types can I use insulated cable staples on, AC and MC included?
This size covers four jacket types: armored and MC cable from 14/2 to 10/3, NM (Romex) from 12/3 to 10/3, 14/3 flat NM, and UF from 14/2 to 12/3. The yellow LDPE insulator sits between the steel and the cable so the jacket is not cut when the staple is driven home.
3) Do I need a special staple gun for Briscon SN-100-IB-100 staples?
No tool required. These are hammer driven into wood framing. The legs are pointed and burr free with sharp tips so they start easily and drive straight without splitting the stud, and the recessed head takes a hammer face cleanly.
4) Will these staples rust in a damp basement or crawlspace wiring run?
The staple body is zinc-plated low carbon steel, which is the standard corrosion resistant finish for cable fasteners in wood framing. Combined with UF cable capacity from 14/2 to 12/3, it suits damp-location runs stapled to wood members. It is a plated carbon steel part, not stainless, so it is not intended for direct weather exposure.
5) Are Briscon cable staples the same product now that they are nVent Gardner Bender?
Yes, same staple. Briscon is now part of nVent Gardner Bender alongside Gardner Bender, Sperry Instruments and Bergen. nVent states the quality, specs, performance and reliability are unchanged, so only the name and packaging differ. Order by the part number SN-100-IB-100 and you get the same 9/16 inch insulated staple.
6) Can I use insulated staples on metal studs or concrete?
No. The SN-100-IB-100 is a hammer-driven staple with pointed steel legs made to penetrate wood framing, studs, joists and rafters. Metal studs and concrete need a different fastening method entirely, such as a cable clamp or strap with an appropriate anchor.
7) How many staples come in a box of Briscon SN-100-IB-100?
100 staples per box. For MRO stock or a rough-in crew it is worth noting the yellow insulator colour codes the 9/16 inch size, so once boxes get mixed into a nail pouch the crew can pick the right width by colour rather than measuring.
8) What is the leg length on these insulated cable staples?
Overall size is 9/16 inch wide by 1-1/4 inch long, with the leg length set to what contractors prefer for secure holding in wood framing. That length bites deep enough into a 2x stud to hold a stacked MC or NM run without the staple backing out.
How fast can I get the Briscon SN100IB100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Briscon SN100IB100 come with a warranty?
Absolutely. The Briscon SN100IB100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Briscon SN100IB100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Briscon SN100IB100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!