Briscon SN-40-B-SS-100 Stainless Steel Cable Staple, 1/2" x 1", 100-Pack
The Briscon SN-40-B-SS-100 is a 1/2" wide by 1" long cable staple made from stainless steel, suited to pressure treated lumber and exterior applications where plain or zinc plated steel may corrode. It holds 14/2 and 14/3 armored (AC) cable, 14/2 and 14/3 metal clad (MC) cable, 14/2 through 10/3 non-metallic sheathed (NM) cable, and 14/2 and 12/2 underground feeder (UF) cable. A recessed head drives quickly and protects cable insulation, and sharp, burr free legs drive straight to help prevent splitting the wood. Sold in a 100-pack box and made in the USA.
Key Features
- Low Carbon Steel: Plain low carbon steel staple for interior wood framing.
- Recessed Head: The recessed head drives quickly and helps protect the cable jacket and insulation.
- Straight Driving Legs: Pointed, burr free legs with sharp tips start easily and drive straight to help prevent splitting the wood.
- Contractor Preferred Length: Leg length engineered to the length contractors prefer for secure holding in framing.
- Clean Handling: Virtually oil free for cleaner handling on the job.
- Hammer Driven: Designed to be driven into wood with a hammer; no special tool required.
- Made in the USA: Manufactured in the United States.
Technical Specifications
- Product Type: Cable staple
- Part Number: SN-40-B-SS-100
- Material: Stainless steel
- Size: 1/2" W x 1" L
- Pack Quantity: 100 per box
- Cable Fit: 14/2 and 14/3 armored (AC) cable, 14/2 and 14/3 metal clad (MC) cable, 14/2 through 10/3 non-metallic sheathed (NM) cable, and 14/2 and 12/2 underground feeder (UF) cable
- Installation: Hammer driven into wood
- Origin: Made in the USA
Typical Applications
- Pressure treated lumber and exterior wood framing
- Decks, porches, sheds and outbuildings
- Securing NM, AC, MC and UF cable in damp or outdoor locations
- Coastal and high humidity installations
- Remodel and new construction rough in
Why Briscon?
Briscon has built cable staples and fasteners for the electrical trade for decades, and the line is now part of nVent Gardner Bender, which unites the Gardner Bender, Sperry Instruments, Bergen and Briscon product lines. The name and packaging are changing, but nVent states that the quality, specs, performance and reliability of these staples remain exactly the same. The SN-40 is Briscon's most common staple size, and this stainless version brings it to treated lumber and outdoor work.
Manufacturer Resources
Product Specs
- list_batch:
- BRI-20260924
- Product Type:
- Cable Staple
- Product Finish:
- Stainless Steel
- Department:
- Electrical
- Product Subgroup:
- Electrical Fasteners
- Product Material:
- Stainless Steel
- Pack size (unit):
- 100