Bryant SPC Series Woven Closed Mesh Cable Support Grip

Bryant SPC Series Woven Closed Mesh Cable Support Grip

The Bryant SPC Series Woven Closed Mesh Cable Support Grip is a family of woven cable grips built to provide dependable strain relief and mechanical support for cables and cords in electrical and communications installations, available in cable diameters ranging from 0.62" to 1.50" to match a wide range of cable and cord sizes. Its closed mesh weave wraps and tightens around the cable jacket as tension is applied, spreading pulling force evenly along the cable rather than concentrating stress at a single connection point. This support grip is typically installed at panel entries, junction boxes, pull boxes, cable trays, and vertical cable drops where cables need to be relieved of their own weight and protected from pulling and vibration loads at terminations. It is suited to indoor electrical and communications cable runs where a woven mesh grip style is called for in place of clamps or tape-based strain relief.

Key Features

• Cable Diameter Range: The SPC Series is available in cable diameters of 0.62", 0.75", 1.00", 1.25", and 1.50" to fit a wide range of cable and cord sizes.
• Closed Mesh Weave: A continuous closed-mesh weave construction wraps securely around the cable or cord jacket along its length for a firm, distributed hold.
• Cable Strain Relief: Relieves tension and mechanical stress from cable and cord connections, helping protect terminations, connectors, and enclosures from pulling loads.
• Self-Tightening Grip Action: The woven mesh design tightens its hold as pulling tension increases, providing a self-adjusting grip on the cable jacket without additional hardware.
• Support Grip Function: Functions as a hanging or anchoring support grip, carrying the weight of vertically or horizontally routed cable runs so terminations are not left bearing load.
• Conforming Fit: The mesh weave conforms around the cable jacket to distribute holding force evenly along the grip length rather than pinching at a single point.
• Simplified Installation: Slips over the cable end and tightens in place, reducing the need for separate clamps or additional strain-relief hardware at the termination point.
• SPC Series: Bryant's SPC Series is built for electrical and communications cable support applications where a closed mesh grip style is specified.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Electrical Panel and Junction Box Cable Support
• Vertical and Horizontal Cable or Cord Drops
• Communications and Data Cable Installations
• Strain Relief at Cable and Cord Terminations
• Cable Tray and Raceway Support Points
• Commercial and Industrial Wiring Systems

Why Bryant?

Bryant is a recognized manufacturer of electrical wiring devices and cable management hardware built for demanding commercial and industrial environments. The SPC Series Closed Mesh Support Grip reflects Bryant's focus on dependable, code-conscious hardware that helps installers protect cable terminations, manage cable weight, and maintain safe, organized wiring systems across its full size range. Choosing a Bryant support grip helps electrical contractors standardize on consistent, professional-grade cable management hardware across a job site.