You may also like
Bullet-90 Degree
LT938P - spec sheet
Features
- Suitable for hazardous locations; Class I Div 2; Class II Div 1 & 2; Groups E, F, G; Class III per N.E.C.; Article 501-4, 502-4 and 503-3
- Fitting ferrule designed to accept variations in conduit sizes and field conduit cuts.
- Smooth ferrule profile reduces friction to ensure a tight conduit-to-fitting seal.
- Outside surface has friction reducing ridges.
- Inner surface teeth bite into conduit or tubing to enhance clamping and sealing action.
LT938P - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Colour:
- Black
- Construction Type:
- External thread
- Etim:
- EC001178 Screw connection for protective plastic hose
- Inner Dimensions Inches:
- 6x5x4
- Inner Quantity:
- 10
- Material Screw Gland:
- Other
- Material Sealing:
- Other
- Nominal Size In Inch:
- 3/8 inch
- Outer Dimensions Inches:
- 26.6x6.7x5.2
- Outer Quantity:
- 50
- Product Group:
- Conduit & Raceway
- Revolving Thread:
- N
- Standards:
- UL E23018, CSA
- Thread Connection Size:
- Other
- Thread Length:
- 14.48mm
- Unspsc:
- 39121420 Liquid tight connectors
- Weight Uom:
- 11.13 lbs. per 100
- Department:
- Electrical
- Product Subgroup:
- Liquidtight Conduit & Fittings
- Product Type:
- 90 Degree Liquidtight Connector
- Product Model:
- 90°-elbow
- Product Details:
- Bullet-90 Degree
- Product Material:
- Thermoplastic
- Type Of Connection (Specs):
- Thread
Thomas & Betts LT938P – Frequently Asked Questions
1) What size liquidtight conduit does the Thomas & Betts LT938P connector fit?
The LT938P is a 3/8 inch trade size fitting. It is a 90 degree liquidtight connector, so it takes 3/8 inch liquidtight flexible conduit on the ferrule end and threads into a 3/8 inch knockout or hub on the box end.
2) Can I use the LT938P fitting in a hazardous location?
Yes, within the classifications stated for it: Class I Division 2, Class II Divisions 1 and 2, Groups E, F and G, and Class III per the N.E.C., Articles 501-4, 502-4 and 503-3. It is not rated for Class I Division 1. It carries UL file E23018 and CSA recognition.
3) Is the LT938P a metal or plastic connector?
Thermoplastic, in black. That makes it non-metallic, so it does not carry equipment ground through the fitting the way a steel or malleable iron liquidtight connector does. If you need the raceway path for grounding, use a metallic fitting with bonding provision and a conduit system suited to it.
4) Why pick a 90 degree liquidtight connector instead of a straight one?
A 90 like the LT938P is for tight terminations where the conduit has to turn immediately at the box, motor, or disconnect and there is no room to sweep the conduit itself. If you have the clearance to make the bend in the flexible conduit run, a straight connector is simpler and keeps the pull easier. The 90 also keeps a controlled bend radius at the box so the liquidtight jacket is not kinked.
5) How does the LT938P seal if my conduit cut is not perfectly square?
The ferrule is built to take variation in conduit size and in field cuts. Its profile is smooth on the outside to cut friction while the conduit seats, with friction-reducing ridges on the outer surface, and the inner surface has teeth that bite into the conduit or tubing to tighten the clamp and seal. In practice that means a slightly off hand-cut end still pulls up tight.
6) How are LT938P connectors packaged for a job or stockroom?
They come 10 to an inner carton and 50 to the outer, so a full outer is five inners. Shipping weight runs 11.13 lbs per 100 pieces. Useful if you are laying in quantity for a motor-connection or rooftop-equipment package rather than buying onesies.
7) Where can I get the manufacturer spec sheet for the Thomas & Betts LT938P?
Thomas & Betts publishes a spec sheet for the LT938P, linked from the product data. It is the document to hand a plan reviewer or inspector who wants the UL file and hazardous-location classifications in writing rather than taking them off a catalog page.
How fast can I get the Thomas & Betts LT938P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts LT938P come with a warranty?
Absolutely. The Thomas & Betts LT938P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts LT938P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts LT938P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.