B-Line CABLE SUPPORT FITTING, SERIES 2,3,4&5, 5" / 6" HEIGHT, 12" WIDTH, 36" RADIUS, ALUMINUM

It is made for B-Line Series 2, 3, 4 and 5 tray. Those series share the fitting interface at this width, so the same 12 inch, 36 inch radius support fitting drops in across all four rather than needing a series-specific part.

Aluminum. That matters for two reasons on the job: it keeps the weight down for overhead work where an electrician is handling fittings off a lift, and it is the usual choice where the tray run sees moisture or corrosive atmosphere. Aluminum tray systems are also normally bonded as part of the equipment grounding path, so plan your bonding jumpers accordingly.

Order the splice plates and connection hardware separately. Cable tray fittings are supplied as the fitting body, and the splice connectors that join it to the straight tray sections are a separate line item matched to the tray series you are running (Series 2, 3, 4 or 5). Hangers, trapeze supports and any dropout or cover accessories are also ordered on their own.

Alongside the ladder and channel tray this fitting serves, B-Line's related lines cover Flextray wire basket tray and accessories, metallic and non-metallic (GRP) channel cable tray, non-metallic GRP tray systems, the Redi-Rail cable tray system, bolted framing strut, spring steel fasteners, and DataComm equipment supports. For a mixed facility, that lets you keep power runs on aluminum tray and branch low-voltage off into wire basket on the same manufacturer's support hardware.