Camden CM-1100/1120 Flush Moun...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$115.00
$109.62
Camden CM-1100 Flush Mount Single Gang Key Switch Control

Camden CM-1100/1120 Flush Mount Single Gang Key Switch Control

(No reviews yet) Write a Review

Model: CM-1120
$115.00
$109.62

In Stock (leaves warehouse same day if ordered before 3pm ET)

$115.00
$109.62
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Camden CM-1100/1120 Flush Mount Single Gang Key Switch Control

Camden vandal resistant key switches feature a 1/4" thick faceplate, with one-piece faceplate and switch bracket design. 1 or 2 contact switches can be mounted. Camden key switches offer the widest range of stock switch configurations in the industry. They accept virtually any 1" - 1-1/4" mortise cylinder and cam (sold separately) .

Note: Mortise cylinder sold separately.

Manufacturer Resources

Product Specs

Subcategory:
Switches/Push Buttons
Warranty:
3 Year Limited
Wireless Communication:
No
Commercial/Residential:
Commercial
Product Type:
Mortise Key Switch
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Switches/Push Buttons
Lock Type:
Mortise cylinder
Product Dimension:
2 3/4” W x 4 1/2” H x 1.5” D
Product Category:
Electronic Access Control
Department:
Door Hardware

Camden Door Controls CM-1120 – Frequently Asked Questions

1) Does the Camden CM-1100 key switch come with a mortise cylinder?
No cylinder is included by default. The CM-1100/1120 key switch is sold as the faceplate and switch assembly, and the mortise cylinder is a separate line. There is an order option for a 60KD 1-1/8 inch mortise cylinder if you want it supplied with the switch; leave that option off and you supply your own cylinder and cam.
2) Should I order the SPST or the SPDT contact on a Camden key switch?
SPST Momentary N/O is the one for a simple door release: turn the key, the contact closes, the door unlocks, and it returns on release. Order the SPDT N/O and N/C Momentary version when the panel or controller needs both a normally open and a normally closed contact at once, for example releasing a maglock while simultaneously shunting an alarm input or signaling a second device. Both are offered on the single gang plate.
3) Will the Camden CM-1100 fit a standard single gang electrical box?
Yes, it is a flush mount single gang device. The faceplate measures 2-3/4 inches wide by 4-1/2 inches high, with 1.5 inches of depth behind the plate, so your back box has to clear that 1.5 inch depth plus the body of whatever mortise cylinder you install.
4) Is this Camden key switch tough enough for a public entrance or a school corridor?
It is built for commercial duty with vandal resistance in mind: a 1/4 inch thick faceplate and a one-piece faceplate and switch bracket, so the plate and the switch cannot be pried apart as separate pieces. That construction is why it gets specified for exterior entries, schools, and other exposed locations rather than a standard stamped plate.
5) Is the Camden CM-1100 a wireless or networked access control device?
No. It is a hardwired mortise key switch with no wireless communication. You run conductors from the contact back to the door controller, maglock power supply, or alarm panel. It carries no credential reader and no network connection, which is exactly why it is used as the mechanical override or manual release on an access control opening.
6) What do I need to order besides the key switch to finish the job?
Three things decide the order: the plate size (single gang), the contact arrangement (SPST Momentary N/O or SPDT N/O and N/C Momentary), and whether you want the 60KD 1-1/8 inch mortise cylinder supplied with it. If you are keying into an existing system, skip the supplied cylinder and have your locksmith furnish a 1 to 1-1/4 inch mortise cylinder with the correct cam. You will also need a single gang back box deep enough for the 1.5 inch device depth.
7) Can two switches be mounted in one Camden CM-1100 plate?
The plate accepts 1 or 2 contact switches behind a single key cylinder position, which is what lets one key turn drive two separate circuits on the same device.
How fast can I get the Camden Door Controls CM-1120 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Camden Door Controls CM-1120 come with a warranty?
Absolutely. The Camden Door Controls CM-1120 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Camden Door Controls CM-1120?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Camden Door Controls CM-1120 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!