SUREWAVE CM-332 SERIES HAND ICON/'WAVE TO OPEN' TEXT/WHEELCHAIR SYMBOL FACEPLATE TOUCHLESS SWITCH
CM-332 touchless switches provide ‘state of the art’ door activation and control while eliminating the spread of germs.
These line powered touchless switches offer an adjustable operating range, selectable motion sensing and relay operating modes, hold open timer(s), REX and door position inputs, and the option for a light ring and wireless transmitter.
SPECIFICATIONS
- Finish options
-
- Black - CM-332/42, CM-332/42N, CM-332/42R, CM-332/42W
- Stainless Steel - CM-332/42S, CM-332/42S-SGLR, CM-332/42SN, CM-332/42SW, CM-332/42SW-SGLR
- Light Ring
- Plug-in light ring for single gang, double gang, and 6" round stainless steel faceplates
- Red/Green /Blue controlled by switch or remotely
- Mounting Plate Size Options
-
- Single Gang - CM-332/42, CM-332/42S, CM-332/42S-SGLR
- /N - Narrow - CM-332/42N, CM-332/42SN
- /W - Double Gang - CM-332/42SW, CM-332/42SW-SGLR, CM-332/42W
- /R - 6" Round - CM-332/42R
Manufacturer Resources
Product Specs
- Series:
- CM-332
- Contact Rating:
- 3 Amps @ 30 V
- Relay Action:
- Multi Function
- Relay Operating Modes:
- Event, Toggle
- Inputs:
- REX, DPS
- Warranty:
- 3 Year Limited
- Wireless Communication:
- Yes
- Subcategory:
- Hands Free Switches
- Sensor:
- Active Infrared Air
- Number of Relays:
- 2
- Application:
- Indoor
- Commercial/Residential:
- Commercial
- Product Type:
- Hands Free Switches
- Power:
- 40 mA
- Fail-safe / Fail-secure:
- Field Selectable
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Voltage:
- 12VAC/DC/24VDC/24VAC
- Product Length:
- 5.25"
- Product Height:
- 2"
- Product Category:
- Electronic Access Control
- Product Weight:
- 0.4
- Product Width:
- 5.5"
- Collection:
- CM-332 Series
- Department:
- Door Hardware
Camden Door Controls CM332/42 – Frequently Asked Questions
1) What voltage does the Camden CM-332 touchless switch run on, and can I power it off my existing operator?
The CM-332 SureWave switch is line powered and accepts 12VAC/DC, 24VDC or 24VAC, drawing 40 mA. That range covers the accessory power output on most low energy door operators and access control power supplies, so in most cases you can pull power from the operator rather than running a separate supply. It is not a battery switch, so a power run to the box is required.
2) Can one CM-332 wave switch trigger both a door operator and an electric strike at the same time?
Yes. The /42 hand icon 'Wave to Open' switch has two relays, so one device can fire the operator on one relay and release the lock or strike on the other, with independent hold open timing. Relay action is multi function and each can be set for Event or Toggle mode. Contacts are rated 3 Amps at 30 V, which suits a strike or operator input, not a high current load.
3) What size electrical box do I need for a Camden SureWave CM-332 wave switch?
Faceplate choice decides the box. The /42 switch comes in single gang, narrow, double gang, and a 6 inch round stainless plate, so you rough in to match the plate you order: a standard single gang box for the single gang and narrow plates, a two gang box for the double gang. The narrow plate is the one to specify when you are mounting on a mullion or a jamb face too tight for a full single gang plate.
4) Is the CM-332 wave to open switch rated for outdoor use?
No. The CM-332 is specified for indoor commercial applications. For an exterior push side actuator, use a weather rated outdoor rated touchless or push plate actuator instead.
5) Can the Camden CM-332 be set fail-safe or fail-secure?
Fail-safe versus fail-secure is field selectable on the CM-332, so the same part covers a mag lock opening that must release on power loss and a strike opening that stays secure. Set it at install to suit the lock and the code requirement for that door.
6) Can you adjust how close someone has to get before the wave switch activates?
Yes. The SureWave CM-332 uses an active infrared air sensor with an adjustable operating range and selectable motion sensing, so you can tighten it down in a tight vestibule to stop passers by triggering the door, or open it up where people approach with full hands.
7) What is the tri-color light ring option on the Camden CM-332 for?
The plug-in light ring gives visual feedback at the switch: red, green or blue, driven by the switch itself or remotely from your access control. Use it to show locked versus unlocked, or to signal a restroom or exam room in use. It plugs into the single gang, double gang and 6 inch round stainless faceplates, and it is an order option, so pick the with light ring variant if you want it.
8) Does the CM-332 accept a request to exit and door position input?
It does. REX and DPS inputs are built in, so the switch can be held off while the door is already open, or tied into a door position contact for sequencing and status. That is what lets one CM-332 handle the interlock or vestibule logic without adding a separate relay board.
9) Does the wave switch have to be hardwired back to the operator, or can it send a wireless signal?
The CM-332 supports wireless operation, with the option for a wireless transmitter in addition to its wired relays. That matters on retrofits where you cannot get a wire across the opening to the operator. Power still has to reach the switch itself, at 12VAC/DC, 24VDC or 24VAC.
10) What finishes does the Camden /42 wave switch faceplate come in, and will they match my other actuators?
Two finishes: black and stainless steel. Stainless is the usual match for commercial restroom and corridor hardware and is available in every plate size including the 6 inch round. Black is offered in single gang, narrow, double gang and 6 inch round as well, so you can standardize a building on one look.
11) How big is the Camden CM-332 switch, and how much does it weigh for shipping?
The CM-332 measures 5.5 x 5.25 x 2 inches and weighs 0.4 lbs, light enough that mounting is a standard box and plate job with no extra bracing.
How fast can I get the Camden Door Controls CM332/42 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Camden Door Controls CM332/42 come with a warranty?
Absolutely. The Camden Door Controls CM332/42 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Camden Door Controls CM332/42?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Camden Door Controls CM332/42 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.