Camden SureWave CM-332 Series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$304.00
Camden Camden SureWave CM-332 Series 2 Relay Standard Touchless Switches CM-332-SD

Camden SureWave CM-332 Series 2 Relay Standard Touchless Switches, Blank Faceplate

(No reviews yet) Write a Review

Model: CM-332
From the CM-332 Series Collection
$304.00
Selected Finish is
Selected Faceplate Size is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$304.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SUREWAVE CM-332 SERIES BLANK STANDARD TOUCHLESS SWITCH

CM-332 touchless switches provide ‘state of the art’ door activation and control while eliminating the spread of germs.

These line powered touchless switches offer an adjustable operating range, selectable motion sensing and relay operating modes, hold open timer(s), REX and door position inputs, and the option for a light ring and wireless transmitter.

SPECIFICATIONS

  • Finish options
    • Black -CM-332/N
    • Stainless Steel - CM-332-S, CM-332-SW, CM-332-SW-SGLR, CM-332S-SGLR
  • Light Ring
    • Plug-in light ring for single gang, double gang, and 6" round stainless steel faceplates
    • Red/Green /Blue controlled by switch or remotely
  • Mounting Plate Size Options
    • Single Gang - CM-332-S, CM-332S-SGLR
    • /N - Narrow - CM-332/N
    • /W - Double Gang - CM-332-SW, CM-332-SW-SGLR

Product Specs

Series:
CM-332
Contact Rating:
3 Amps @ 30 V
Relay Action:
Multi Function
Relay Operating Modes:
Event, Toggle
Inputs:
REX, DPS
Warranty:
3 Year Limited
Wireless Communication:
Yes
Subcategory:
Hands Free Switches
Sensor:
Active Infrared Air
Number of Relays:
2
Application:
Indoor
Commercial/Residential:
Commercial
Product Type:
Hands Free Switches
Power:
40 mA
Fail-safe / Fail-secure:
Field Selectable
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Voltage:
12VAC/DC/24VDC/24VAC
Product Length:
5.25"
Product Height:
2"
Product Category:
Electronic Access Control
Product Weight:
0.4
Product Width:
5.5"
Collection:
CM-332 Series
Department:
Door Hardware

Camden Door Controls CM-332 – Frequently Asked Questions

1) What voltage does the Camden SureWave CM-332 touchless switch run on, and how much current does it draw?
The CM-332 is line powered and accepts 12VAC/DC, 24VDC or 24VAC, drawing 40 mA. That range lets it share the same 12V or 24V supply you are already running for a mag lock, strike or operator, so in most retrofits no separate power supply is needed. Budget the 40 mA draw into your supply's total load.
2) Can the CM-332 switch both a door operator and a lock at the same time?
Yes. The CM-332 carries two relays with multi-function action, so one output can trigger the automatic operator while the second releases the lock. Each contact is rated 3 Amps at 30 V, which covers a typical strike or mag lock coil directly; anything heavier should be switched through an interposing relay.
3) Will the Camden CM-332 mount in the single gang box already in my wall?
There is a single gang faceplate version, so it drops onto a standard single gang box. Narrow and double gang faceplates are also offered. Pick the plate to match the box you have: narrow for a mullion or door frame, single gang for a standard wall box, double gang where you want the larger plate or more room behind for wiring.
4) Is the CM-332 fail-safe or fail-secure?
Field selectable on the CM-332, so you set it at install rather than ordering a different part. That matters on egress doors where an AHJ wants the lock to release on power loss, and on secure openings where it must stay locked.
5) Can the CM-332 be used outdoors on an exterior entry?
No. The CM-332 is rated for indoor commercial use only. For an exterior vestibule or weather-exposed entry you need a switch built for outdoor service; mounting this one outside exposes the electronics to moisture it is not sealed against.
6) Does the touchless switch have inputs for a request-to-exit device and a door contact?
Both. The CM-332 accepts REX and DPS (door position switch) inputs, so an exit device switch or motion sensor can trigger the same outputs, and the door contact lets the switch see whether the door is actually closed before it re-times or re-locks.
7) Do I have to wave my hand right on the plate, or can the sensing range be adjusted?
Range is adjustable on the CM-332. It uses an active infrared sensor, so it reads a hand passing in front of the plate with no contact at all, and you tune how far out it picks up during commissioning. Useful where a switch sits in a busy corridor and you need to shorten the range to stop nuisance activations from passing traffic.
8) What is the difference between Event and Toggle mode on the CM-332?
Those are the two relay operating modes. Event gives you a momentary activation with a hold open timer, which is what you want on a public restroom or entry door served by an operator. Toggle latches the relay on with one wave and off with the next, which suits an application where a door needs to be held unlocked or an operator kept in automatic until someone waves again.
9) What finishes does the Camden CM-332 come in, and is the light ring something I add later?
Two finishes: black and stainless steel. The tri-color light ring is a plug-in module that shows red, green or blue and can be driven by the switch or remotely, and it is a purchase option rather than standard, so you specify with or without it. Light ring plates cover single gang, double gang and 6 inch round stainless faceplates.
10) Does the CM-332 work with a wireless receiver, or is it hard-wired only?
Both are possible. The CM-332 is line powered and hard wires to your relays and inputs, with an optional wireless transmitter so it can also signal a receiver at the operator or controller. That is the workaround when there is no practical wire path from the switch location back to the door.
11) How big is the CM-332 faceplate, for planning a wall or mullion layout?
Published dimensions are 5.5 inches wide, 5.25 inches long and 2 inches high, at 0.4 lb. Check the narrow version against your mullion or frame face before committing if space is tight.
12) Why is the CM-332 called a blank faceplate switch, and does it matter for a hospital or school install?
Blank means the plate carries no printed wheelchair symbol or wording, just the sensing area. Facilities standardizing on unmarked plates, or ones adding their own engraved or applied graphics, choose the blank. If your opening needs the accessibility symbol shown at the actuator, a printed faceplate version is the one to specify instead.
How fast can I get the Camden Door Controls CM-332 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Camden Door Controls CM-332 come with a warranty?
Absolutely. The Camden Door Controls CM-332 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Camden Door Controls CM-332?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Camden Door Controls CM-332 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!