CDVI Americas A22KITSTB Atrium...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,039.00
$1,457.82
CDVI Americas A22KITSTB Atrium 2-Door Kit - A22, 2-STARPB, 15 Credentials

CDVI Americas A22KITSTB Atrium 2-Door Kit - A22, 2-STARPB, 15 Credentials

(No reviews yet) Write a Review

Model: A22KITSTB

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,039.00
$1,457.82
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

CDVI Americas A22KITSTB Atrium 2-Door Kit - A22, 2-STARPB, 15 Credentials

The ATRIUM access control system redefines ease of use and performance. ATRIUM allows you to manage up to 500 doors, proximity card readers, keypads or Schlage® wireless door handles. Setup of these devices is a breeze with ATRIUM’s FREE software. The embedded web server provides instant results using any web browser, smartphone or tablet.

The A22 is ATRIUM’s powerful Web-Based IP hybrid module. The flexibility of the A22 module allows it to be set either as a 2-door controller or expander (2 in 1).

Kit includes:

  • (1) A22 controller
  • (2) STARPB readers
  • (15) Credentials (5 CS, 5 KTAG, 5 DISCTAG)
  • Atrium software
  • Master and programming cards

Specifications

  • Controls 2 doors and 2 readers
  • Pre-assembled universal plug-in power supply (120V/240V) included
  • Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors).
  • On-board Ethernet Port with AES 256-bit encryption
  • On-board RS485 communication bus, 1220 m (4000 feet)
  • On-board Embedded Web Server
  • Auto-detect hardware modules
  • Quick and easy card enrollment procedure
  • Lock outputs: 2 (750mA @ 12VDC/each)
  • Relay Outputs: 2 Form C relays (Dry Contact) 5A @ 250VAC, 7A @ 125VAC, 7A @ 30VDC
  • 6 multi-purpose inputs (12 using zone doubling)
  • Completely fuseless system
  • Up to 10,000 users   
  • Up to 10,000 cards
  • Up to 25,000 Event Buffer
  • Ultra fast firmware updating
  • FREE Management Software
  • Maintenance-friendly snap on terminal connectors
  • Comprehensive LED status indicators
 
 

Resources:

CDVI Access Control Data Sheet

Manufacturer Resources

Product Specs

Subcategory:
Readers & Credentials
Commercial/Residential:
Commercial
Electronic:
Yes
Product Type:
Access Controllers
Product Group:
Electronic Access Controls
Product Subgroup:
Readers, Keypads and Credentials
Product Function:
Controller With Reader
Product Category:
Electronic Access Control
Department:
Door Hardware

Schlage Electronics A22KITSTB – Frequently Asked Questions

1) What comes in the CDVI Atrium A22KITSTB 2-door kit, and do I need anything else to get it running?
The A22KITSTB kit gives you one A22 controller, two STARPB readers, 15 credentials (5 CS cards, 5 KTAG, 5 DISCTAG), the Atrium software, and the master and programming cards. A pre-assembled universal plug-in power supply (120V/240V) is in the box too, so power is covered. What the kit does not include is the door hardware itself: strikes, maglocks, or electrified locksets, plus request-to-exit devices and door contacts if you want them monitored. Wire and conduit are on you as well. For a two-door job this is otherwise a complete head-end.
2) Will the Atrium A22 controller power my electric strikes directly, or do I need a separate power supply for the locks?
The A22 has two lock outputs rated 750mA at 12VDC each, one per door, so a 12VDC strike or maglock inside that draw runs straight off the controller. Check your lock's inrush and holding current against 750mA before you commit. Anything 24V, anything over 750mA, or a bank of maglocks needs its own supply, and in that case you drive it from the board's Form C relays instead: two dry contact relays rated 5A at 250VAC, 7A at 125VAC, and 7A at 30VDC. That is also how you switch AC-powered hardware, since the lock outputs are DC only.
3) How many doors can I grow the Atrium system to if I start with this 2-door kit?
Atrium scales to 500 doors, so a two-door kit is a starting point rather than a ceiling. The A22 module is a 2-in-1: set it as a 2-door controller or as an expander off an existing controller. That means the first A22 you buy runs the site, and each additional A22 you add later gets configured as an expander on the RS485 bus. The system carries up to 10,000 users and 10,000 cards with a 25,000 event buffer, and hardware modules auto-detect when you add them. Across the whole system Atrium also handles proximity readers, keypads, and Schlage wireless door handles, so a phased rollout does not have to be all one device type.
4) Do I have to install software or pay a license fee to manage the CDVI Atrium A22?
No license fee and no server to stand up. The A22 runs an embedded web server, so you administer it from any web browser, smartphone, or tablet on the network, and the Atrium management software is free. That matters for a property manager with a handful of buildings: no workstation dedicated to access control, no annual software renewal, and staff can add a card from a phone at the door. Firmware updates are free as well, and CDVI describes the update process as fast.
5) Is the CDVI A22 controller encrypted, and is it good enough for a facility that requires high security credentials?
The A22's Ethernet port carries AES 256-bit encryption, so controller-to-network traffic is protected. The credential side is a different question. The A22KITSTB ships with STARPB readers and CS, KTAG, and DISCTAG credentials, which is standard proximity. If your specification calls for encrypted credentials end to end, look at the CDVI A22K Krypto high security encrypted 2-door controller, or the A22K1 kit, which pairs the high security controller with two K1 readers and DESFire EV2 credentials. Same 2-door footprint, different security posture at the card.
6) What is the difference between the CDVI A22 controller sold on its own and the A22KITSTB kit?
Both are built on the same A22 ATRIUM 2-door hybrid controller. The A22KITSTB is a complete package: the A22 controller, two STARPB readers, 15 credentials (5 CS, 5 KTAG, 5 DISCTAG), ATRIUM software, and master and programming cards. The CDVA22 is the A22 ATRIUM 2-door controller supplied with its power supply and enclosure, without readers or credentials bundled in. If the readers are already on the doors and only the head end is being replaced, the A22 controller alone covers it; if the openings are being built from scratch, the kit brings the reading end and the cards with it.
7) Which CDVI 2-door controller should be used when the site requires encrypted high-security credentials?
The CDVI A22K Krypto is the high-security encrypted 2-door controller in the ATRIUM line. The A22KITSTB kit is built on the standard A22 module, which carries AES 256-bit encryption on its Ethernet port and ships with CS cards, KTAGs and DISCTAGs. Where the security policy calls for encryption at the credential itself rather than only on the network link, the A22K Krypto is the model written for that requirement.
8) Is there a CDVI ATRIUM 2-door kit that comes with DESFire credentials instead of the STARPB reader package?
Yes. The CDVI A22K1 is an ATRIUM high-security 2-door controller supplied with two K1 readers and DESFire EV2 credentials. The A22KITSTB pairs its A22 controller with two STARPB readers and 15 credentials made up of 5 CS cards, 5 KTAGs and 5 DISCTAGs. Both land two doors and two readers; the choice comes down to which credential technology the facility is standardizing on, since the cards and the readers have to match.
9) Does any CDVI ATRIUM kit include the door strikes, or do those have to be ordered separately?
The CDVI A22K1DS is the KRYPTO kit supplied with door strikes. The A22KITSTB covers the controller, two STARPB readers and 15 credentials, and its A22 module provides two lock outputs rated 750mA at 12VDC each to drive the locking hardware, but the strikes themselves are not part of that package. On a two-opening job where nothing is on the door yet, the A22K1DS is the kit that arrives with the locking device included.
10) How far can I run the reader and module wiring from the A22 controller?
Reader and module communication rides the on-board RS485 bus, good for 1220 m (4000 feet). That covers a campus run or a long corridor between an electrical room and a remote entrance without repeaters. Ethernet is a separate matter: the on-board port follows normal network cabling limits, and you only need one drop for the whole system since the A22 hosts the software itself.
11) Can I use the Atrium A22 for elevator floor control instead of doors?
Yes, and without buying different hardware. Any A22 door controller converts to an A22EC elevator controller by updating the firmware, which is free, and it handles up to 256 floors. So a mixed-use building can standardize on one module across lobby doors and cab control. Bear in mind that a 256-floor elevator application needs output capacity per floor, which comes from adding modules to the RS485 bus rather than from the two lock outputs and two relays on the A22 itself.
12) How many door contacts and exit buttons can I wire to the A22, and can it monitor door position on both doors?
Six multi-purpose inputs on the board, and 12 if you use zone doubling. For a two-door install that is comfortable: request-to-exit and door position switch on each opening uses four, leaving two for tamper, a bypass input, or a fire alarm interface. Zone doubling is how you get monitored REX, DPS, and an auxiliary contact per door without adding an input module. The inputs are software-assigned, so what each one does is set in the browser interface rather than by terminal position.
13) For expanding an existing ATRIUM system past the doors already controlled, is the A22KITSTB kit the right part or is the bare controller better?
The A22 module in the A22KITSTB can be set either as a 2-door controller or as an expander, so the kit does work as an expansion on a system already running ATRIUM, and it brings two STARPB readers and 15 credentials with it. Where the readers and cards for the added openings are already on hand, the CDVA22 A22 controller with power supply and box is the same expansion capability without the reader and credential bundle. Both communicate over the on-board RS485 bus, which runs up to 4000 feet.
14) Will the CDVI A22K Krypto controller work with the STARPB readers supplied in the A22KITSTB kit?
They are not interchangeable at the reading end. The A22K is the Krypto high-security encrypted 2-door controller, and the encrypted reader channel is the point of that model; the STARPB readers packaged with the A22KITSTB are matched to the standard A22 module. Both control two doors on the ATRIUM platform, so the controllers look like substitutes on paper, but a Krypto head end needs to be specified with its own reader and credential set rather than fed the STARPB readers from the standard kit.
15) Is the CDVI Atrium A22 kit meant for commercial buildings or is it a residential system?
Commercial. The A22KITSTB is specified for commercial use, and the capacity backs that up: 10,000 users, 10,000 cards, a 25,000 event buffer, and expansion to 500 doors on one system. That suits multi-family common areas, an office suite, a healthcare wing, or a school. It is more system than a single-family house needs, and the payoff is that a two-door install today does not have to be replaced when the building adds openings.
16) Do I need to keep spare fuses on hand for the CDVI A22 controller?
No. The A22 is a completely fuseless system, so there is nothing to blow and nothing to replace at 2am when a maintenance tech shorts a strike lead. Terminal connectors snap on and off, which means you can pull a board for swap or bench work without re-terminating every conductor, and the LED status indicators tell you what is happening at each point rather than making you meter the board. Those three details are what make the difference on a service call.
17) What credential types come with the A22KITSTB kit and can I issue more later?
Fifteen credentials ship with the kit in three formats: 5 CS cards, 5 KTAG key fobs, and 5 DISCTAG adhesive discs. That mix lets you hand printed cards to staff, fobs to contractors, and stick a disc on a phone case or existing keyring. The system holds up to 10,000 cards total, and CDVI describes card enrollment as a quick procedure done from the browser interface. Master and programming cards come with the kit as well, so initial setup does not depend on getting to a computer first.
How fast can I get the Schlage Electronics A22KITSTB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics A22KITSTB come with a warranty?
Absolutely. The Schlage Electronics A22KITSTB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics A22KITSTB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics A22KITSTB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!