CDVI Americas CDVC110 Adult Base + Column (110CM) F/FTC1000 Scanner

The CDVC110 is a floor stand only: an adult-height column plus base built to hold a CDVI FTC-1000 facial recognition and temperature scanner. The scanner head itself is a separate purchase. Order the stand when you need a freestanding screening point rather than a wall-mounted reader.

The column is 110 cm, roughly 43 inches, and it is the adult-height version. That puts an FTC-1000 scanner head at face level for standing adults at a lobby entrance or staff door. If your screening point is for children, this adult column is the wrong height.

It is built for the CDVI FTC-1000 scanner. The mounting is specific to that unit, so it is not a general-purpose stand for other brands of face or temperature terminals.

The CDVC110 is the adult-height base and column, 110 cm, that holds an FTC-1000 facial recognition and temperature scanner at roughly 43 inches. It is mounting hardware for the scanner and does not itself read credentials or switch a door. If you need the part that both reads a credential and controls the opening, that is a different class of product, such as the CDVI Americas A22KITSTB Atrium 2-door kit, which comes as a controller with reader and includes two STARPB readers and 15 credentials, or the Schlage Electronics CTE ENGAGE single door controller with a mobile-enabled multi-technology reader on a direct RS-485 connection.

No. The column and base are a mounting pedestal. Door control comes from the FTC-1000 terminal it carries and whatever access controller that terminal reports to. If you need the controller side, look at a CDVI Atrium controller-with-reader package such as the A22 kit.

Use the CDVC110 for the screening side - it is the adult-height 110 cm base and column that stands an FTC-1000 facial recognition and temperature scanner at about 43 inches in the lobby - and pair it with a credential-reading door controller for the release. The CDVI Americas A22KITSTB Atrium kit covers two doors as a controller with reader and ships with two STARPB readers and 15 credentials, which suits a lobby with a vestibule pair. For a single leaf tied back to a hosted system, the Schlage Electronics CTE ENGAGE single door controller uses a mobile-enabled multi-technology reader on a direct RS-485 connection.

It is a commercial-rated access control accessory, used at building entries, healthcare and school check-in points, and employee screening lanes where an FTC-1000 face and temperature scanner is deployed freestanding instead of on a wall or turnstile.

One: model C110, the adult base and column set. There are no finish or size options to specify on the order.