Command Access DL20 20" Door L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$47.34
Command Access Command Access DL20 Door Loop CAT DL20

Command Access DL20 20" Door Loop for Electric Lock Power Transfer

(No reviews yet) Write a Review

Model: DL-20A
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$47.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access DL20 20" Door Loop for Electric Lock Power Transfer

Low-Cost Power Transfer Solution for Electric Door Hardware

The Command Access DL20 Door Loop provides a reliable, cost-effective method for transferring low voltage power from the door frame to electric locking devices. This 20" door loop is specifically designed for use with electric mortise and cylindrical locks, electric exit trims, and latch pullback devices. Available in aluminum and duronatic finishes, the DL20 offers professional-grade power transfer capabilities for commercial access control applications.

Professional Features & Benefits

  • 20" Length Design: Standard 20" length provides optimal reach for most door frame to door power transfer applications.
  • Universal Electric Lock Compatibility: Works with electric mortise locks, cylindrical locks, electric exit trims, and latch pullback devices for versatile installation options.
  • Low Voltage Power Transfer: Engineered specifically for safe, reliable low voltage power transmission between door frame and electric locking hardware.
  • Dual Finish Options: Available in aluminum and duronatic finishes to match various door hardware aesthetics and environmental requirements.
  • Cost-Effective Solution: Provides an economical alternative to more complex power transfer methods while maintaining reliable performance.
  • Commercial-Grade Construction: Built for demanding commercial applications where consistent power delivery is essential for security system operation.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Electronic Access Controls
  • Product Group: Electronic Access Controls
  • Product Subgroup: Door Cords and Loops
  • Product Type: Door Cords and Loops
  • Series: DL20 Series
  • Subcategory: Door Loop

Professional Applications

  • Commercial Building Security Systems
  • Office Building Access Control
  • Healthcare Facility Door Hardware
  • Educational Institution Security Systems
  • Retail Establishment Access Points
  • Industrial Facility Entry Control
  • Multi-Tenant Residential Properties

Why Choose Command Access Quality?

Command Access door loop products deliver reliable low voltage power transfer with durable construction designed for commercial applications. The DL20 Series provides cost-effective power delivery solutions that maintain consistent performance in demanding access control environments. Engineered for professional installations where dependable power transfer is essential for security system operation.

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Electronic Access Controls
Series:
DL20 Series
Subcategory:
Door Loop
Commercial/Residential:
Commercial
Product Subgroup:
Door Cords and Loops
Product Type:
Door Cords and Loops
Product Category:
Electronic Access Controls
Department:
Door Hardware

Command Access DL-20A – Frequently Asked Questions

1) Will the DL20 door loop work with an electrified mortise lock or an electric exit device trim?
Yes, all of those. The DL20 is built for electric mortise locks, electric cylindrical locks, electric exit trims, and latch pullback devices. It is the wiring path, not the lock, so it does not care about the lock function or handing, only that the device runs on low voltage.
2) Is 20 inches long enough for my door, or do I need a longer door loop?
Twenty inches is the standard length and it covers most frame to door transfers, where the loop mounts near the hinge side and only has to bridge the gap plus the swing. If your junction box or raceway sits well away from the opening, measure the actual run from the frame termination point to the device entry on the door before ordering, because the DL20 is a single fixed 20 inch length.
3) Should I use a surface door loop or a concealed electric power transfer hinge?
A surface loop like the DL20 mounts on the face of the frame and door with no door or frame prep, so it is the retrofit answer when the opening is already hung and you are adding an electrified lock. A concealed transfer, whether an electric hinge or a through-door transfer, is mortised into the frame and door edge and is invisible when the door is closed, but it means routing and machining both leaves. On a new install with the door still on the bench, concealed usually wins on looks. On an existing opening in an occupied building, the surface loop is the low cost, low disruption route.
4) Does the DL20 door loop include the power supply or the wire for the electric lock?
No. The DL20 is the transfer loop only. You still need a low voltage power supply sized to the electrified device, the wiring run to the frame, and the electrified lock, trim, or latch pullback itself. On an access control opening you will also be terminating the loop into whatever the panel or reader side calls for, so plan the frame end junction before the loop goes up.
5) What finishes does the Command Access DL20 door loop come in?
Two: aluminum and duronatic. Aluminum matches most storefront and aluminum frame openings; duronatic is the dark bronze tone that blends with bronze anodized frames and dark painted hollow metal. Since a door loop mounts on the visible face of the frame and door edge, picking the one closer to your frame color is the difference between hardware that disappears and hardware people notice.
6) Is the DL20 door loop rated for a healthcare or school opening?
The DL20 is a commercial grade product and Command Access lists it for building security systems in offices, healthcare facilities, schools, retail, industrial entries, and multi tenant residential. That is an application list, not a code listing, so if your opening is a fire rated door, confirm the whole electrified assembly with your AHJ, since a surface loop crossing the gap on a labeled door is something the inspector will look at.
How fast can I get the Command Access DL-20A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access DL-20A come with a warranty?
Absolutely. The Command Access DL-20A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access DL-20A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access DL-20A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!