Parts and Accessories

Falcon SC70A-61 Blade Stop Spacer for SC70A Series Door Closers Blade stop spacer, SC70A-61 Required to lower parallel arm shoeto clear 1⁄2" (13mm) blade stop.

Falcon SC71A-3071 Standard cylinder (CYL) for SC70A Series Door Closers

Falcon SC71A-3071DEL Delay cylinder (DEL) for SC70A Series Door Closers

Falcon SC80A-18 Mounting plate - Top jamb for SC80A Series Door Closers

Falcon SC81A-18FC Mounting Plate - Top Jamb Full Cover (FULLCOV) for SC81A Series Door Closers

Falcon SC80A-18PAFC Mounting plate PA for full cover for SC80A Series Door Closers Plate, SC80A-18PAFC Required for parallel arm mounting where top rail is less than 4 3⁄8" (111mm), measured from the stop. Plate requires 1 7 ⁄8" (48mm)...

Falcon SC80A-30 Cush shoe support for SC80A Series Door Closers Soffit shoe support, SC80A-30 Provides anchorage for fifth screw used with soffit shoe, where reveal is less than 3 1 ⁄16" (78mm).

Falcon SC81A-3049/PA Hold Open Arm with PA Bracket (HWPA) for SC81A Series Door ClosersB

Falcon SC81A-3049DS Hold-Open Dead Stop Parallel Arm (DSHO) for SC81A Series Door Closers  

Falcon SC81A-3049SS Hold-open Spring-n-stop Arm (SSHO) for SC81A Series Door Closers  

Falcon SC81A-3077DS Dead Stop Parallel Arm (DS) for SC81A Series Door Closers  

Falcon SC81A-3077SS Spring-n-stop Arm (SS) for SC81A Series Door Closers  

Falcon SC81A-61 Blade Stop Spacer for SC81A Series Door Closers  

Falcon SC81A-62A Offset Auxiliary Shoe for SC81A Series Door Closers      

Falcon SC80A-72 Slim cover (SLIMCOV) for SC80A Series Door Closers Cover, SC80A-72Standard, non-handed, slim line plastic cover encloses the closer body with a cap on the unused pinion shaft.

Falcon SC80A-72FC Full cover (FULLCOV) for SC80A Series Door Closers

Falcon SC81A-3071 Standard cylinder (CYL) for SC80A Series Door Closers

Falcon SC81A-3071DEL Delay cylinder (DEL) for SC80A Series Door Closers

Falcon SC90A-18 Mounting plate - Top jamb for SC90A Series Door Closers Plate, SC90A-18 Required for top jamb mounting where head frame is less than 1 3⁄4" (44mm) or flush ceiling conditions exists.

Falcon SC90A-18PA Mounting plate - Push side for SC90A Series Door Closers Required for parallel arm mounting where top rail is less than 4 5⁄8" (117 mm), measured from the stop. Plate requires 2 1⁄8" (54mm) minimum top rail measured from...

Falcon Standard screw pack for SC60A/80A Series Door Closers

Hager 2-679-0997 8300 Auto Op Programming, Handheld KP EVO Device Applications Designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power...

HAGER 5113 Blade Stop SpacerNotes:Required to lower parallel arm shoe to clear 1/2" (13 mm) blade stop for aluminum frames

HES 1000-102 1006 Series Rain Guard Rain, Rain Or High Dust Areas