You may also like
CU TP 2HL LUG LONG BRL 1/0 1/2B PNK
Manufacturer Resources
Product Specs
- Cable Size:
- 1/0 AWG
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire Termination
- Product Type:
- Long Barrel
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Stud Size:
- 1/2 in
- Sub Brand Label:
- Blackburn
- Type2:
- Cable or wire lug
- Department:
- Electrical
- Product Subgroup:
- Lugs
- Product Color:
- Pink
- Product Material:
- Copper
Blackburn LCN10 – Frequently Asked Questions
1) What wire size does the Blackburn LCN10 compression lug take?
The LCN10 is sized for 1/0 AWG conductor. It is a copper compression lug, so it goes on copper conductor, not aluminum. Pink is the color code that identifies the 1/0 die and barrel size, which is how an electrician confirms the right crimp die at the tool before pressing.
2) Can I use the Blackburn LCN10 on aluminum conductor?
No. This is a copper-bodied compression lug intended for copper conductor. For aluminum or dual-rated runs you need a connector rated AL9CU, which this is not identified as. Putting copper-only hardware on aluminum conductor is a rejected termination.
3) What does the two hole pad on the Blackburn LCN10 do that a one hole lug does not?
The LCN10 is a two hole lug, so it bolts at two points on the pad. That stops the termination rotating under fault torque or vibration and is what many equipment and grounding specs call for on larger conductors. A one hole lug of the same 1/0 size is fine where the spec allows a single bolt, but it can spin.
4) What is a long barrel lug for, and do I need one instead of a standard barrel?
A long barrel connector like the LCN10 takes two crimps instead of one, which increases pull-out resistance and contact area on the conductor. Utility, service entrance, and grounding specs frequently call for the long barrel version. For general branch terminations a standard barrel 1/0 lug is usually accepted. Check your crimp tool has enough die positions for a two-crimp barrel before you start.
5) Is the Blackburn LCN10 sold individually or in a bag?
It is sold each, one lug per unit. Order the quantity you need for your terminations, remembering most jobs need one per conductor end plus spares for miscrimps.
6) What part number and country of origin should I put on my submittal for this Blackburn lug?
Submit it as Blackburn LCN10. Country of origin is Mexico, which is the detail procurement and government jobs with origin reporting will ask for.
How fast can I get the Blackburn LCN10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn LCN10 come with a warranty?
Absolutely. The Blackburn LCN10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn LCN10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn LCN10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.