You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Coil Voltage:
- 440/480V
- Contact Configuration:
- 1NO-1NC instantaneous, 1NO-1NC timed
- Frequency Rating:
- 50-60 Hz
- Notes:
- ON or OFF delay timers are field convertible from ON to OFF or OFF to ON delay by rotating the solenoid assembly 180 degrees. Timing function is shown on mounting plate.
- Series:
- D80 series
- Time Delay:
- 0.5-180 seconds adjustable
- Timer Type:
- ON delay
- Department:
- Electrical
B-LINE D80JE11C – Frequently Asked Questions
1) Can the B-Line D80JE11C pneumatic timer be changed from ON delay to OFF delay in the field?
Yes. The D80JE11C ships as an ON delay timer, but ON and OFF delay units in the D80 series are field convertible by rotating the solenoid assembly 180 degrees. The timing function is marked on the mounting plate, so you can confirm which mode the unit is set to after the change. That means one part number can cover both delay requirements on a panel.
2) What coil voltage does the D80JE11C timer require?
The D80JE11C is a 440/480V coil, rated 50-60 Hz, so it drops onto either a 60 Hz North American or 50 Hz supply at that voltage. If your control circuit runs at 120V or 240V, this is the wrong suffix in the D80 series and you need the unit built for your control voltage.
3) Does the D80JE11C give me both timed and instantaneous contacts?
It does. The contact block provides 1NO-1NC instantaneous plus 1NO-1NC timed. The instantaneous set transfers as soon as the coil is energized, so you can use it for sealing in or interlocking, while the timed set transfers after the adjustable delay elapses. That saves adding a separate control relay alongside the timer.
4) How long a delay can I set on the B-Line D80 series pneumatic timer?
Timing is adjustable from 0.5 seconds up to 180 seconds (3 minutes) on the D80JE11C. If your sequence needs a delay longer than three minutes, this pneumatic head won't reach it.
5) What is the difference between an ON delay and OFF delay timer for a motor starter circuit?
An ON delay timer starts counting when the coil is energized and transfers its timed contacts after the set interval, which is what you want for staged starting or holding a fan on standby before a load picks up. An OFF delay counts after the coil drops out, keeping a circuit alive for a set period after the signal is removed, which suits purge or coast-down functions. The D80JE11C is supplied as an ON delay but converts to OFF delay in the field by rotating the solenoid assembly 180 degrees, so either sequence is covered.
6) Is the D80JE11C the exact replacement part number for an existing B-Line D80 pneumatic timer?
Match on both the part number and the coil rating. The D80JE11C is the D80 series ON delay unit with a 440/480V, 50-60 Hz coil, 0.5 to 180 second adjustment, and a 1NO-1NC instantaneous plus 1NO-1NC timed contact arrangement. If the timer coming out of the panel carries a different suffix, check its coil voltage and contact count against those figures before swapping it in.
How fast can I get the B-LINE D80JE11C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE D80JE11C come with a warranty?
Absolutely. The B-LINE D80JE11C is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE D80JE11C?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE D80JE11C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.