You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Coil Voltage:
- 220/240V
- Contact Configuration:
- 2NO-2NC timed
- Frequency Rating:
- 50-60 Hz
- Notes:
- ON or OFF delay timers are field convertible from ON to OFF or OFF to ON delay by rotating the solenoid assembly 180 degrees. Timing function is shown on mounting plate. These timers will not accept instantaneous contacts.
- Series:
- D80 series
- Time Delay:
- 0.5-180 seconds adjustable
- Timer Type:
- ON delay
- Department:
- Electrical
B-LINE D80NE2B – Frequently Asked Questions
1) Can the B-Line D80NE2B be changed from ON delay to OFF delay in the field?
Yes. The D80 Series timers convert between ON and OFF delay in the field by rotating the solenoid assembly 180 degrees. The D80NE2B ships as an ON delay unit, and the timing function currently set is marked on the mounting plate, so you can verify which way it is configured after the swap without pulling the cover apart.
2) How many contacts does the D80NE2B have, and are they all timed?
The contact block is 2NO-2NC, and all four contacts are timed. There are no instantaneous contacts, and the D80 Series ON/OFF delay timers will not accept instantaneous contacts at all. If your control scheme needs one contact to transfer immediately on energization, you have to pick that up from a separate relay or from an auxiliary contact on the starter.
3) I need an instantaneous contact plus a time delay in the same device. Is the D80NE2B the right choice?
No. The D80NE2B carries 2NO-2NC timed contacts only, and these ON/OFF delay timers will not accept instantaneous contacts. For that duty, use a separate control relay alongside the timer, or specify a timing device built to take an instantaneous contact block. Ordering this one and expecting to add the block later leaves you short on the panel.
4) What is the adjustable timing range on the B-Line D80NE2B timer?
Half a second up to 180 seconds, adjustable, which covers most motor sequencing and delayed-start duties in a control panel. If your sequence needs longer than three minutes, this unit will not reach it.
5) What part number do I order for the 240V ON delay D80 timer?
The manufacturer part number is D80NE2B, a single ON delay configuration with a 220/240V, 50-60 Hz coil and 2NO-2NC timed contacts. There are no finish or size options to specify; voltage and timing function are built into the part number.
6) Is the D80NE2B an electronic timer or a pneumatic one?
Pneumatic. Timing is done by an air-dashpot mechanism driven by a solenoid rather than by electronics, which is why the ON to OFF delay change is a mechanical rotation of the solenoid assembly instead of a setting change. Adjustment is a mechanical dial across the 0.5 to 180 second range.
How fast can I get the B-LINE D80NE2B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE D80NE2B come with a warranty?
Absolutely. The B-LINE D80NE2B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE D80NE2B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE D80NE2B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.