OATEY 793D-1 Dearborn® 1-1/2" ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$71.43
$21.43
OATEY 793D-1 Dearborn® 1-1/2" x 2" Double Slip Joint Connection - 20 Ga.

OATEY 793D-1 Dearborn® 1-1/2" x 2" Double Slip Joint Connection - 20 Ga.

(No reviews yet) Write a Review

Model: 793D-1
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$71.43
$21.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Dearborn® 1-1/2" x 2" Double Slip Joint Connection - 20 Ga.

  • Features

    • Belled-end slip joint connections
    • Compatible with copper plumbing
    • Extends and completes a plumbing drain installation
    • Chrome plated

Manufacturer Resources

Product Specs

Connection Type:
Slip Joint
Joint Type:
Slip Joint
Volume:
0.008
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Fittings
Product Type:
Brass Fittings
Product Finish:
Chrome
Product Material:
Brass
Product Weight:
0.29

OATEY 793D-1 – Frequently Asked Questions

1) What does the 1-1/2" x 2" on the Oatey Dearborn 793D-1 slip joint connection refer to?
Those are the two slip joint sizes on the fitting: it connects 1-1/2 inch tubular drain to 2 inch tubular drain. Both ends are belled-end slip joint, so it acts as a reducing coupling between the two sizes on a waste line. It is brass with a chrome plated finish.
2) Do I need solder or glue to install the Dearborn 793D-1 double slip joint connection?
No. Both ends are slip joint, so the fitting is assembled with slip nuts and washers and tightened by hand or with slip joint pliers. No soldering, no cement, no threading. Slip nuts and washers are not part of the fitting itself, so make sure you have the right 1-1/2 inch and 2 inch nuts and washers on hand.
3) Will a 20 gauge chrome slip joint connection hold up in a commercial restroom?
20 gauge is the heavier wall used on exposed commercial tubular drain work, as opposed to the thinner 22 gauge common on residential kits. Combined with brass construction and chrome plating, it is the spec typically pulled for exposed lavatory and sink waste in public restrooms where the piping is visible and gets handled.
4) Can I use the Oatey 793D-1 on copper drain piping?
Yes, it is compatible with copper plumbing. Because both connections are slip joint rather than soldered, it mates to copper tubular drain by slip nut and washer, which also means you can break the joint later without heat.
5) Is the 793D-1 a trap, or just a connector?
It is a straight connector, not a trap. The 793D-1 extends and completes a drain run between a 1-1/2 inch and a 2 inch slip joint, so you still need a P-trap, tailpiece, and waste arm as the job requires. Use it where a smaller tubular waste has to tie into 2 inch drainage.
6) What part number do I order for the Dearborn 1-1/2 by 2 inch double slip connection?
Order Oatey Dearborn model 793D-1. It is a single configuration, 1-1/2 inch by 2 inch, 20 gauge chrome plated brass, so there is no finish or size choice to specify.
7) How much does the Oatey 793D-1 slip joint connection weigh for a parts kit or truck stock?
About 0.29 pounds each, with a listed volume of 0.008. It is a small, light brass fitting, easy to carry several on a service van for lavatory and sink waste changeouts.
How fast can I get the OATEY 793D-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 793D-1 come with a warranty?
Absolutely. The OATEY 793D-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 793D-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 793D-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!