Dearborn® 1-1/4" x 2" Double Slip Joint Connection - 20 Ga.
Features
- Belled-end slip joint connections
- Compatible with copper plumbing
- Extends and completes a plumbing drain installation
- Chrome plated
Manufacturer Resources
Product Specs
- Connection Type:
- Slip Joint
- Joint Type:
- Slip Joint
- Volume:
- 0.008
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- Brass Fittings
- Product Finish:
- Chrome
- Product Material:
- Brass
- Product Weight:
- 0.25
OATEY 793C-1 – Frequently Asked Questions
1) What does the 1-1/4 inch by 2 inch sizing on the Oatey Dearborn 793C-1 slip joint connection actually mean?
The 793C-1 is a double slip joint connection: 1-1/4 inch tubing size on the connection, with a 2 inch length. It has belled ends on both sides so it slips over 1-1/4 inch drain tubing at each end, joined with slip nuts and washers. It is used to extend or close a gap in a lavatory or sink drain run, not to reduce between two different tube sizes.
2) Are slip nuts and washers included with the Oatey 793C-1 coupling?
No. The 793C-1 is the belled-end brass connection only. Slip joint nuts and beveled or flat washers sized for 1-1/4 inch tubing are separate items, and you need one nut and washer per end to make up the joint.
3) My trap arm comes up about two inches short of the trap. Is this the piece I need?
That is exactly what the 793C-1 is for. It is a 2 inch double slip joint connection that bridges a short gap between two lengths of 1-1/4 inch tubular drain, extending the run to complete the installation without recutting or repiping. Both ends are belled, so it slips over the existing tube at each side.
4) Is the Oatey 793C-1 brass or plastic, and will it hold up in an exposed pedestal sink install?
It is brass with a chrome plated finish, so it is the right choice where the trap arm is visible under a pedestal or wall hung lav. Plastic tubular is fine inside a cabinet but looks wrong exposed and dents easier; the chromed brass matches the rest of a chrome P-trap assembly.
5) Can I use the 793C-1 to connect to copper drain tubing?
Yes. The connection is compatible with copper plumbing, and the slip joint makes up over the tube with a nut and washer rather than being soldered, so no heat is involved at the joint.
6) How much does the Oatey 793C-1 weigh for shipping or a parts kit?
It weighs 0.25 lb, with a listed volume of 0.008. It is a small tubular brass piece, so property managers and MRO buyers commonly stock several at a time alongside slip nuts and washers.
How fast can I get the OATEY 793C-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 793C-1 come with a warranty?
Absolutely. The OATEY 793C-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 793C-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 793C-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.