OATEY 505-1 Dearborn® 1-1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$125.71
$75.71
OATEY 505-1 Dearborn® 1-1/4 in. x 10 in. Semi-Cast P-Trap w/ Cleanout 17 Ga. w/ Shallow Flange & Zinc Nuts

OATEY 505-1 Dearborn® 1-1/4 in. x 10 in. Semi-Cast P-Trap w/ Cleanout 17 Ga. w/ Shallow Flange & Zinc Nuts

(No reviews yet) Write a Review

Model: 505-1
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$125.71
$75.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Dearborn® 1-1/4 in. x 10 in. Semi-Cast P-Trap w/ Cleanout 17 Ga. w/ Shallow Flange & Zinc Nuts

  • Features

    • Zinc nuts
    • 17 gauge wall tube
    • Semi-Cast J-bend
    • For warranty product details, refer to the Oatey Limited Warranty document
    • For use in commercial applications
    • Shallow Flange
    • 1-1/4 In. Inlet and outlet
    • Includes 2 zinc nuts, 1 reducing washer, 2 poly washers, 2 rubber washers, fiber cleanout washer, cleanout plug, shallow metal flange, quarter bend and cast J-Bend with cleanout
    • Chrome plated finish


505-1 - spec sheet

Manufacturer Resources

Product Specs

Connection Type:
Slip Joint
Escutcheon Flange:
Flange
Joint Type:
Slip Joint
Volume:
0.09
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Flashing and Flanges
Product Type:
Flange
Product Finish:
Chrome
Product Material:
Brass
Product Weight:
1.404

OATEY 505-1 – Frequently Asked Questions

1) Will the Oatey Dearborn 505-1 P-trap fit a 1-1/4 inch lavatory drain?
Yes. The 505-1 is a 1-1/4 inch inlet and outlet trap, so it mates to a standard 1-1/4 inch lavatory tailpiece and a 1-1/4 inch wall stub. Connections are slip joint, so no soldering or threading is needed at the joints. A reducing washer ships in the bag if the tailpiece is smaller than the trap inlet.
2) What comes in the box with the Oatey 505-1 trap, or do I need to buy washers separately?
Everything for the joints is in the bag: 2 zinc nuts, 1 reducing washer, 2 poly washers, 2 rubber washers, a fiber cleanout washer, the cleanout plug, a shallow metal flange, the quarter bend, and the cast J-bend with cleanout. You supply the tailpiece and whatever is on the wall side of the arm.
3) Is the Oatey Dearborn 505-1 heavy enough for a commercial restroom?
It is built for commercial use. The tube is 17 gauge wall brass rather than thin-wall, and the J-bend is semi-cast, which is the heavier section where traps usually corrode through first. Finish is chrome plated over brass. In high-traffic restrooms that is the spec facility people standardize on when thin-wall traps keep failing.
4) Does this trap have a cleanout plug?
Yes, the 505-1 has a cleanout at the bottom of the cast J-bend, with the plug and fiber cleanout washer supplied. That lets you clear a stoppage or recover a dropped ring without pulling the trap apart, which is the main reason maintenance departments order the cleanout version.
5) What is a shallow flange on a P-trap and when should I order the deep one instead?
The shallow flange on the 505-1 is a low-profile escutcheon that covers the hole where the trap arm enters the wall. It works when the wall face is finished flush and the pipe penetration is neat. If the opening is oversized or ragged, or tile has been cut back around the stub, a deep flange gives more coverage and hides more of the gap.
6) How long is the trap arm on the Oatey 505-1?
The arm is 10 inches, so measure from the wall stub to the centerline of the tailpiece before ordering. Ten inches covers most standard lavatory rough-ins and can be cut shorter if the fixture sits tight to the wall. It cannot be extended, so a longer offset needs a longer arm or an extension tube.
7) Why zinc nuts instead of brass or chrome nuts on the Oatey 505-1?
The 505-1 ships with 2 zinc slip nuts. They are the standard commercial-grade nut for exposed traps and are what keeps the assembly cost down under a lavatory where the trap is behind a bowl or panel. If the trap is fully exposed on a wall-hung fixture where appearance matters, a chrome-nut version of the same trap is the one to specify.
How fast can I get the OATEY 505-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 505-1 come with a warranty?
Absolutely. The OATEY 505-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 505-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 505-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!