You may also like
|
Large Item, additional shipping charges may apply.
|
Delaney 1000 Series - 6.5 Foot Standard Sliding Barn Door Hardware Kit
Features:
- Piece together your own unique barn door system with this hanger
- Designed for single doors
- Contains one (1) hanger and mounting screws
- Single bar hanger gives a clean look
- Steel construction and quality craftsmanship ensure that you'll enjoy this product in your home for years to come
- Accommodates doors up to 330 pounds
Specifications:
- Center to Center: 3-1/2"
- Width: 2-3/4"
- Height: 11-1/2"
- Depth: 2-1/2"
- Door Thickness: 1-3/8" to 1-3/4"
- Max Door Weight: 330 lbs
- Includes: One (1) Hanger and Mounting Screws
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 1 unit
- Maximum Purchase:
- 99 units
- Subcategory:
- Barn Door Hardware
- Product Type:
- Barn Door Track
- Series:
- 1000 Series
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Barn Door Hardware
- Commercial/Residential:
- Residential
- (CTC) Center-to-Center:
- 3-1/2"
- Door Thickness Range:
- 1 3/8" to 1 3/4"
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
- Product Depth:
- 2 1/2"
Delaney Hardware BD1664 – Frequently Asked Questions
1) Will the Delaney 1000 Series barn door hanger fit a 1-3/4 inch thick door?
Yes. The 1000 Series hanger clamps doors from 1-3/8 to 1-3/4 inches thick, which covers both a standard 1-3/4 inch solid core slab and the thinner 1-3/8 inch interior doors common in older homes. Anything thicker than 1-3/4 inches, including a built-up rustic plank door, is outside the range and the strap will not seat correctly.
2) How heavy a barn door can the Delaney BD1664 hardware kit carry?
Up to 330 pounds of door. That covers a solid core slab or a heavy custom wood door on a single opening. The hardware is rated residential, so it is sized for house and apartment openings rather than high-cycle commercial traffic.
3) Can I hang a pair of doors with the Delaney 1000 Series 6.5 foot barn door kit?
No. The 1000 Series kit is set up for a single door, and a 6.5 foot track only gives enough run for one slab to clear its opening. A bi-parting pair needs a longer track and a second set of hangers, ordered as two setups.
4) How much wall clearance does a Delaney 1000 Series barn door need behind the trim?
The hanger projects 2-1/2 inches deep, so the door rides that far off the mounting surface. Check any door casing, base, light switch or outlet in the slide path against that 2-1/2 inch offset before you set the track height, since trim thicker than the projection will foul the door.
5) What is a comparable flat track barn door hanger to the Delaney BD1664 kit?
The Emtek Flat Track Barn Door Hardware set is the closest peer in the same category. Both are steel flat track sliding door systems for a single door. The Delaney BD1664 hanger measures 2-3/4 inches wide by 11-1/2 inches tall with a 2-1/2 inch depth, a 3-1/2 inch center-to-center strap spacing, and fits doors 1-3/8 to 1-3/4 inches thick. The Emtek set uses a low profile concealed wheel rather than an exposed single bar hanger, so the wheel sits hidden behind the door face instead of showing on the strap.
6) I need a barn door track that hides the roller instead of showing an exposed wheel. What are my options?
Two concealed options sit alongside the Delaney BD1664, whose single bar hanger rides on an exposed flat track. The Emtek Flat Track Barn Door Hardware uses a low profile concealed wheel in steel, and the Pemko LP200A6 is a low profile concealed sliding door track system supplied at 72 inches with a 200 pound capacity. If the design intent is a visible strap and wheel, the BD1664 is the one that reads that way; if the hardware should disappear above the door, go concealed.
7) How far apart do the mounting holes go on the Delaney barn door hanger straps?
The hanger is drilled 3-1/2 inches center to center, so that is the spacing you lay out on the door face when you pre-drill. The strap itself is 2-3/4 inches wide and 11-1/2 inches tall, which is what determines how far down the door face the fasteners land.
8) What comes in the Delaney BD1664 kit, and what else do I need to buy?
You get one hanger with its mounting screws. That is the door-side half of the job. Everything that anchors to the building, plus floor guides and any door stops, is separate, so budget for those when you spec the opening. The single bar hanger is a plain flat strap rather than a wheel-and-strap assembly.
9) I need a sliding door track for a commercial corridor. Is the Delaney 1000 Series barn door kit the right choice?
Not really. The 1000 Series is a residential-rated barn door kit. For a commercial opening, a concealed track system such as the Pemko LP200A6 is the more usual specification, though it is rated to 200 pounds so a heavy slab needs checking against that figure.
10) Is the Pemko LP200A6 a drop-in replacement for a Delaney 1000 Series barn door kit?
No, they are different systems. The LP200A6 is a low profile concealed sliding door track supplied as a 72 inch track with a 200 pound capacity, so the roller assembly is hidden and the track length is fixed at 6 feet. The Delaney BD1664 is a flat track kit with an exposed single bar hanger 11-1/2 inches tall on 3-1/2 inch centers, and it is a residential rated assembly. Swapping one for the other means new track, new hangers, and a different mounting pattern into the header, not a hanger change.
11) I have a 6 foot opening for a barn door slide. Which track length fits?
The Delaney 1000 Series BD1664 is a 6.5 foot standard sliding barn door hardware kit, and the Pemko LP200A6 is supplied as a 72 inch, or 6 foot, concealed track. Barn door track is normally sized at roughly twice the door width so the slab clears the opening fully when open, so measure the door width rather than the opening alone before picking between the two lengths.
12) Will Delaney 1000 Series black barn door hardware match the rest of the doors in my building?
The finish is US19 black, and the 1000 Series is a family, so hangers ordered for other openings in the same series and finish will read the same across a property. Standardizing on one series also means the same 3-1/2 inch center to center layout and the same 2-1/2 inch wall projection on every door, which keeps install and any later replacement consistent.
How fast can I get the Delaney Hardware BD1664 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware BD1664 come with a warranty?
Absolutely. The Delaney Hardware BD1664 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware BD1664?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware BD1664 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.