You may also like
|
Large Item, additional shipping charges may apply.
|
Delaney 1000 Series - 6 Foot Standard Sliding Barn Door Hardware Kit
Features:
- Piece together your own unique barn door system with this hanger
- Designed for single doors
- Contains one (1) hanger and mounting screws
- Single bar hanger gives a clean look
- Steel construction and quality craftsmanship ensure that you'll enjoy this product in your home for years to come
- Accommodates doors up to 330 pounds
Specifications:
- Center to Center: 3-1/2"
- Width: 2-3/4"
- Height: 11-1/2"
- Depth: 2-1/2"
- Door Thickness: 1-3/8" to 1-3/4"
- Max Door Weight: 330 lbs
- Includes: One (1) Hanger and Mounting Screws
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 1 unit
- Maximum Purchase:
- 99 units
- Subcategory:
- Barn Door Hardware
- Product Type:
- Barn Door Track
- Series:
- 1000 Series
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Barn Door Hardware
- Commercial/Residential:
- Residential
- (CTC) Center-to-Center:
- 3-1/2"
- Door Thickness Range:
- 1 3/8" to 1 3/4"
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
- Product Depth:
- 2 1/2"
Delaney Hardware BD1064 – Frequently Asked Questions
1) Do I need anything besides the barn door hardware kit to hang the door?
The 1000 Series comes with the hanger and its mounting screws. Everything that touches your building is on you: fasteners suited to your header (through-bolts or lags into blocking or studs, since the door load hangs entirely off the track), a backer board if there is no continuous framing behind the drywall, a floor guide to keep the bottom of the slab from swinging, and a pull. Barn door slabs are also sold separately.
2) What is the closest 6 foot flat track barn door kit to the Delaney 1000 Series if the door is under 200 pounds?
The Pemko LP200A6 is the nearest 6 foot peer - it is a low profile concealed sliding door track system sold in a 72 inch length with a 200 lb capacity, which is the same 6 feet of track the Delaney 1000 Series 6 Foot Standard Sliding Barn Door Hardware Kit covers. The difference is the ceiling: the Delaney 1000 Series accommodates doors up to 330 lbs, while the Pemko is rated to 200 lb. For a hollow-core or light solid door on a single opening, both cover the span; the Pemko puts the wheel out of sight, the Delaney uses a single bar hanger for an exposed look.
3) What is the center-to-center measurement on Delaney 1000 Series barn door hangers, and where do I drill the door?
Center to center on the 1000 Series hanger is 3-1/2 inches. That is the spacing between the two mounting fasteners going into the face of the door, so lay out your holes on that dimension. Overall the hanger measures 2-3/4 inches wide, 11-1/2 inches tall, and 2-1/2 inches deep, so the door hangs down from the track by roughly that hanger height plus your header mounting.
4) Is the Pemko LP200A6 a direct substitute for the Delaney 1000 Series 6 foot kit?
Not really a like-for-like swap. Both cover a comparable opening, the Pemko LP200A6 being a 72 inch track, but the Pemko is a low-profile concealed system rated to 200 pounds while the Delaney 1000 Series is exposed flat track carrying up to 330 pounds. If your slab is a heavy solid-core or reclaimed door, the weight rating is the deciding number, not the length.
5) Can I swap a concealed wheel low profile barn door system for the Delaney 1000 Series on the same wall?
Not as a like-for-like part swap. The Emtek B13030 flat track hardware and the Pemko LP200A6 concealed track system both run their wheels concealed in a low profile track, while the Delaney 1000 Series 6 Foot Standard Sliding Barn Door Hardware Kit hangs the door from a single bar hanger with a 3-1/2 inch center-to-center mounting pattern and 2-1/2 inch depth off the wall. Changing between them means new wall anchoring layout and a different projection into the room, not just a new hanger on the existing track.
6) What is the difference between the Delaney 1000 Series barn door hardware and Emtek flat track with a concealed wheel?
They produce different hardware looks on the same opening. The Emtek B13030 is flat track barn door hardware with a low profile concealed wheel in steel, so the roller is hidden behind the track face. The Delaney 1000 Series 6 Foot Standard Sliding Barn Door Hardware Kit uses a single bar hanger for a clean exposed strap look, in steel construction, and comes in US19 Black, US10B Oil Rubbed Bronze, US15 Satin Nickel and US32D Stainless Steel. Neither is a drop-in for the other visually, so match the choice to what the rest of the doors in the unit already show.
How fast can I get the Delaney Hardware BD1064 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware BD1064 come with a warranty?
Absolutely. The Delaney Hardware BD1064 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware BD1064?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware BD1064 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.