You may also like
Delaney E Series - SD Style Privacy Door Leverset
Product Technologies:
Privacy Function: Privacy door hardware features a locking mechanism on the interior for use on bedroom and bathroom doors where locking is needed. The exterior side features a small pin hole to unlock the door hardware from the outside.
Features:
- Independent Torsion Spring
- Removable Through Bolts
- Concealed Mounting Screws
- Anti-Friction Latch Retractor
- Clutch Function Panic Proof - Push/Turn
- Panic Proof - Push/Turn
Specifications:
Backset: 2-3/4” UL Latch standard, 2-3/8” optional
Door Thickness: 1-3/8” ~ 2”. Adjustable mounting plate
Strikes: 4-7/8” ANSI Strike standard (9109)
Door Prep:
- Cross bore: 2-1/8”
- Edge bore: 1”
- Latch face: 2-3/4”: 1-1/8” x 2-1/4”, 2-3/8”: 1” x 2-1/4”
- Dummies are surface mounted
Latches:
- Entrance: 2-3/4” (E9070T) standard. 2-3/8” (E9060T) optional
- Pass/Priv: 2-3/4” (E9073T) standard. 2-3/8” (E9063T) optional
- Faceplate: 2-3/4”: 1-1/8” x 2-1/4”. 2-3/8”: 1” x 2-1/4” Sq. Corner
- Bolt: 1/2” Stainless Steel throw. Meets 3-Hr. Fire Rating
ANSI & Federal Standards:
- Meets & exceeds requirements of BHMA/ANSI A156.2 Series 4000, GR2, 400,000 Cycles.
- Meets FF-H-106C Federal Standard.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- E Series
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Commercial
- Lock Function:
- Privacy
- Product Type:
- Leverset
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Privacy/Bed/Bath
- Product Finish:
- US26D Dull Chrome
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 3S5022 – Frequently Asked Questions
1) Which backset do I need to order for this Delaney privacy lever, 2-3/8 or 2-3/4?
Backset is a required choice at order time: 2-3/4 inch or 2-3/8 inch. The 2-3/4 inch is the standard UL latch, and 2-3/8 inch is the option. Measure from the door edge to the center of the 2-1/8 inch cross bore on the existing prep and match it, since the latch and faceplate differ between the two.
2) Will this Delaney leverset drop into an existing standard 2-1/8 inch bored door prep?
It will. Door prep is a 2-1/8 inch cross bore with a 1 inch edge bore, which is the standard commercial cylindrical prep. Latch face prep is 1-1/8 by 2-1/4 inches on the 2-3/4 inch backset and 1 by 2-1/4 inches on the 2-3/8 inch backset, both square corner.
3) Will this privacy lever latch into the strike already in my frame?
The standard strike is a 4-7/8 inch ANSI strike (9109), and the latch bolt is a 1/2 inch stainless steel throw. If your frames are prepped for a 4-7/8 inch ANSI strike, as most hollow metal commercial frames are, it lines up. Wood frames with a small T-strike will need the opening reworked or the existing strike reused.
4) Can I use this Delaney privacy lever on a fire rated bedroom or bathroom door?
The latch bolt meets a 3-hour fire rating, and the 2-3/4 inch backset latch is the UL latch standard. That covers the latching hardware itself; the door and frame assembly still has to be rated and labeled for the opening.
5) Is this Delaney lever heavy duty enough for apartment bathrooms and hotel guest rooms?
It is a commercial Grade 2 cylindrical lockset that meets and exceeds BHMA/ANSI A156.2 Series 4000, Grade 2 at 400,000 cycles, and also meets the FF-H-106C federal standard. That cycle count suits multi-family bedrooms and baths, hospitality guest rooms, and offices. For very high traffic public restrooms, a Grade 1 lockset is the heavier step up.
6) How does the privacy function work, and how do I get in if someone locks themselves in?
Locking is from the inside only, which is what you want on bedroom and bathroom doors. The outside trim has a small pin hole for emergency release, so staff can unlock it from the corridor side with a pick or small tool. There is no key or cylinder on a privacy function.
7) Is there a privacy lever with a red/green occupancy indicator instead of a plain pin-hole release?
Yes. The Delaney E Series SD Style privacy leverset in dull chrome (US26D) uses the standard privacy arrangement - an interior locking mechanism with a small pin hole on the exterior to unlock. If the opening needs visible occupancy status, such as a single-occupancy restroom, the Cal-Royal INDLEV-20 privacy indicator leverset provides a red/green occupancy indicator. Both are offered in 2-3/8 inch and 2-3/4 inch backsets.
8) Which privacy lever fits a 2 inch thick door?
The Delaney E Series SD Style privacy cylindrical leverset covers 1-3/8 inch through 2 inch door thickness with an adjustable mounting plate. The Cal-Royal INDLEV-20 privacy indicator leverset adjusts from 1-3/8 inch to 1-3/4 inch, so for the thicker door the Delaney E Series is the one that reaches 2 inch.
9) For a spec that calls out ANSI/BHMA Grade 2, which privacy lever meets it?
The Delaney E Series SD Style privacy leverset is a Grade 2 lockset that meets and exceeds BHMA/ANSI A156.2 Series 4000, Grade 2 at 400,000 cycles, and meets FF-H-106C. The Cal-Royal INDLEV-20 privacy indicator leverset is described as standard duty commercial grade, so where a drawing names a Grade 2 number specifically, the Delaney E Series is the one carrying that designation.
10) Does this Delaney leverset need to be handed when I order it?
No handing call is needed. The E Series uses an independent torsion spring with an anti-friction latch retractor, so the lever works on either hand of door. Backset is the only required selection.
11) What replacement latch do I order if I damage the one in this privacy lever?
Privacy and passage functions use latch E9073T at the 2-3/4 inch backset and E9063T at 2-3/8 inch. Do not substitute the entrance latches (E9070T and E9060T), they are for the keyed function.
12) Is there a privacy leverset that shows whether a restroom is occupied instead of this one?
For a visual occupancy call, the Cal-Royal INDLEV-20 is a privacy indicator leverset with a red/green occupancy indicator, adjustable for 1-3/8 to 1-3/4 inch doors and offered in 2-3/8 and 2-3/4 inch backsets. The Delaney E Series SD is a plain privacy function with no indicator, and it covers a wider door range up to 2 inches.
13) Is the Cal-Royal INDLEV-20 a direct drop-in for the Delaney E Series privacy lever?
Not automatically. Both are privacy cylindrical leversets available in 2-3/8 inch and 2-3/4 inch backsets, so the bored door prep is comparable, but they differ in two ways that matter: the INDLEV-20 carries a red/green occupancy indicator in place of the plain pin-hole release, and its door thickness adjustment runs 1-3/8 inch to 1-3/4 inch versus 1-3/8 inch to 2 inch on the Delaney. Confirm door thickness and whether an indicator is wanted before swapping.
14) Will this lever finish match the other dull chrome hardware in my building?
The finish is US26D dull chrome, the satin chrome standard used across most commercial openings, so it pairs with US26D closers, hinges and exit trim already in service.
15) Do the mounting screws show on the face of this Delaney lever?
No. The E Series uses concealed mounting screws with removable through bolts, so the finished rose face is clean while still giving you a through-bolted installation for pull-off resistance.
16) Can someone break the lever by hanging on it?
The lever has a clutch function that is panic proof, push or turn, so force applied to a locked lever spins or gives rather than transmitting into the spindle and latch mechanism. That is the feature that keeps levers alive in schools and apartments.
How fast can I get the Delaney Hardware 3S5022 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 3S5022 come with a warranty?
Absolutely. The Delaney Hardware 3S5022 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 3S5022?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 3S5022 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.