You may also like
Delaney F Series - CT Style Privacy Door Leverset
Product Technologies:
Privacy Function: Privacy door hardware features a locking mechanism on the interior for use on bedroom and bathroom doors where locking is needed. The exterior side features a small pin hole to unlock the door hardware from the outside.
Features:
- Independent Torsion Spring
- Removable Through Bolts
- Concealed Mounting Screws
- Anti-Friction Latch Retractor
- Clutch Function Panic Proof - Push/Turn
Specifications:
Backset: 2-3/4” UL Latch standard, 2-3/8” optional
Door Thickness: 1-3/8” ~ 2”. Adjustable mounting plate
Strikes: 4-7/8” ANSI Strike standard (9109)
Door Handing: Not required
Door Prep:
- Cross bore: 2-1/8”
- Edge bore: 1”
- Latch face: 1-1/8” x 2-1/4”
- Dummies are surface mounted
Latches:
- Entrance: 2-3/4” (F9070T) standard. 2-3/8” (F9060T) optional
- Pass/Priv: 2-3/4” (F9073T) standard 2-3/8” (F9063T) optional
- Faceplate: 1-1/8” x 2-1/4” square corner
- Bolt: 1/2” Stainless Steel throw. Meets 3-Hr. Fire Rating
ANSI & Federal Standards:
- Meets & exceeds requirements of BHMA/ANSI A156.2 Series 4000, GR1, 800,000 Cycles.
- Meets FF-H-106C Federal Standard.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- F Series
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Commercial
- Lock Function:
- Privacy
- Product Type:
- Leverset
- Grade:
- Grade 1
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Privacy/Bed/Bath
- Product Finish:
- US26D Dull Chrome
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware 3C6022 – Frequently Asked Questions
1) Will the Delaney F Series CT privacy leverset fit a 1-3/8 inch door?
Yes. The F Series CT privacy leverset covers doors from 1-3/8 inches up to 2 inches using an adjustable mounting plate, so it works on older 1-3/8 inch interior doors and standard 1-3/4 inch commercial doors alike without a separate thickness kit.
2) What backset does this Delaney privacy lever come with, and can it be used on a 2-3/8 inch bore?
It ships standard with the 2-3/4 inch UL latch, and a 2-3/8 inch latch is the option. For the privacy/passage function the standard latch is the F9073T at 2-3/4 inches, with the F9063T covering 2-3/8 inches. Those are the two backsets you see on bored doors, so an existing prep is almost always one or the other.
3) What door prep do I need to drill for this cylindrical leverset?
Standard bored prep: 2-1/8 inch cross bore, 1 inch edge bore, and a 1-1/8 x 2-1/4 inch latch face with square corners. The strike is a 4-7/8 inch ANSI strike (9109). If your doors were already drilled for a commercial cylindrical lock, that prep matches and it drops straight in.
4) Do I have to order this privacy leverset left or right handed?
No handing to specify. The Delaney F Series CT lever is non-handed, so one part number covers both swings, which is why it standardizes well across a floor of bedroom and bathroom doors.
5) Is this Delaney lever strong enough for a hotel or dorm bathroom door?
It is a commercial Grade 1 lockset that meets and exceeds BHMA/ANSI A156.2 Series 4000, Grade 1, at 800,000 cycles, and it also meets the FF-H-106C federal standard. That cycle rating is the top tier for bored locks, which is what you want on high-traffic guest room and restroom doors.
6) How does the privacy function work if someone locks themselves in the bathroom?
Locking happens on the inside lever, and the outside has a small pin hole so staff can release it from the corridor with an emergency tool. The lever also uses a clutch, push/turn panic-proof action, so forcing the outside lever does not break the mechanism when it is locked.
7) I need to see from the hallway whether a restroom is occupied. Is there a better option than this lever?
This Delaney CT privacy lever locks and releases with a pin hole only, no visual indicator. If you want an occupied/vacant readout, the Cal-Royal INDLEV-20 is a privacy indicator leverset with a red/green occupancy indicator, available in 2-3/8 and 2-3/4 inch backsets. Trade-off: the Cal-Royal is a standard duty commercial lock and adjusts for 1-3/8 to 1-3/4 inch doors, where the Delaney is Grade 1 and covers up to 2 inch doors.
8) What privacy lever should I use instead of the Delaney 3C6022 if staff need to see whether a restroom is occupied?
Use the Cal-Royal INDLEV-20 privacy indicator leverset, which carries a red/green occupancy indicator so the status is visible without trying the lever. The Delaney F Series CT Style 3C6022 is a straight privacy function lever with an interior locking mechanism and a small pin hole on the exterior side for emergency release, but no visual indicator. Single-occupancy restrooms and changing rooms are the usual case for the indicator version.
9) Is the Cal-Royal INDLEV-20 a direct swap for the Delaney 3C6022 privacy lever?
Both are cylindrical privacy leversets and both cover 2-3/8 inch and 2-3/4 inch backsets, so the door bore work is the same class of prep. Two differences matter before you swap: the Delaney F Series CT Style 3C6022 fits doors 1-3/8 inch through 2 inch using an adjustable mounting plate, while the INDLEV-20 adjusts 1-3/8 inch to 1-3/4 inch, so a 2 inch door rules the Cal-Royal out. The Delaney also meets BHMA/ANSI A156.2 Series 4000 Grade 1 at 800,000 cycles, where the INDLEV-20 is a standard duty commercial lever.
10) For a 2 inch thick bathroom door, which privacy lever fits?
The Delaney F Series CT Style 3C6022 privacy leverset covers 1-3/8 inch through 2 inch door thickness with its adjustable mounting plate. The Cal-Royal INDLEV-20 privacy indicator lever adjusts 1-3/8 inch to 1-3/4 inch, so it stops short of a 2 inch door. On thick solid-core or built-up doors, the Delaney is the one that reaches.
11) Can this privacy lever go on a fire rated bathroom door?
The latch bolt is stainless steel with a 1/2 inch throw and meets a 3-hour fire rating, so the latching hardware itself is rated for fire door use. Note this is a privacy function with no key cylinder, which is normal for a rated restroom or bedroom door.
12) What finish is model 3C6022, and will it match brushed chrome hardware already on my doors?
Model 3C6022 is finished US26D, dull chrome, which is the satin chrome look used on most commercial interior hardware. It reads as a match alongside satin chrome closers, hinges and push plates on the same openings.
13) Will this latch into the strike that is already in my frame?
The lock is built around a 4-7/8 inch ANSI strike (9109) with a 1/2 inch stainless bolt throw. If your frame is prepped for the standard 4-7/8 inch ANSI strike, the supplied latch lines up. Frames with a small T-strike or a residential 2-3/4 inch full-lip strike will need the frame plate changed to the ANSI cutout.
14) I need a Grade 1 privacy lever for a high-traffic multi-family bathroom. Which one meets that?
The Delaney F Series CT Style 3C6022 is rated Grade 1 and meets and exceeds BHMA/ANSI A156.2 Series 4000 at 800,000 cycles, and also meets the FF-H-106C federal standard, which is what institutional and multi-family specs usually call for. The Cal-Royal INDLEV-20 privacy indicator lever is a standard duty commercial lever, so choose it when the occupancy indicator is the priority rather than the Grade 1 cycle count.
15) Does the Cal-Royal INDLEV-20 replace a keyed entry lever, or is it the same function as the Delaney 3C6022?
Neither one is a keyed lock. The INDLEV-20 is a privacy function lever with an indicator, and the Delaney F Series CT Style 3C6022 is privacy/bed/bath function, locked from the inside and released through a small pin hole on the outside. If the opening needs a key outside, a privacy lever of either type is the wrong function and you need an entry or storeroom lever instead.
16) Are the mounting screws visible after install on this leverset?
No exposed fasteners on the rose. The F Series CT uses concealed mounting screws with removable through bolts, so the trim goes on clean while the through bolts still give you the pull-through strength on a lever. It also has an independent torsion spring to keep the lever from sagging and an anti-friction latch retractor.
How fast can I get the Delaney Hardware 3C6022 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware 3C6022 come with a warranty?
Absolutely. The Delaney Hardware 3C6022 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware 3C6022?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware 3C6022 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.