Delta Breez Integrity ITG80H -...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$105.51
Delta Breez Integrity ITG80H - 80 CFM Fan with Humidity Sensor

Delta Breez Integrity ITG80H - 80 CFM Fan with Humidity Sensor

(No reviews yet) Write a Review

Model: ITG80H
From the BreezIntegrity Collection
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$105.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

The Builder’s Choice for Green Construction.
Delta BreezIntegrity ITG80H is ENERGY STAR qualified with DC brushless motor engineered to run continuously for a minimum 70,000 hours; airflow rating of 80 CFM and loudness rating of 1.5 Sones at 0.1 static pressure as certified by the Home Ventilating Institute (HVI); power consumption of not more than 10.0 Watts with efficiency rating of 9.0 CFM/Watt. UL and cUL listed for tub/shower enclosure when used with GFCI-protected branch circuit wiring.UL and cUL listed for tub/shower enclosure when used with GFCI-protected branch circuit wiring.

Features

  • 80 CFM dual speed fan for spaces up to 80 Sq. Ft.
  • Brushless DC Motor outlasts typical AC motors by 2-1/2x.
  • Quiet at 1.5 sones.
  • Energy star®-qualified.
  • Built-in adjustable humidity sensor so that fan runs at full speed (80 CFM) when humidity is above the user-adjustable set-point and runs continuously at a pre-set lower level (0 or 50 CFM) when humidity is below the set-point.
  • Compact housing for easy retrofit and replacement of older bath fans.
  • Housing size 7-1/4" x 7-1/2" x 5-3/4".
  • 4" duct.
  • UL and cUL listed for ceiling and wall mount installations.
  • UL and cUL listed for tub/shower enclosure when used with GFCI-protected branch circuit wiring.
  • 3 yr. limited warranty.

Product Specs

Subcategory:
BreezIntegrity
Fan Speed:
Continuous Low Speed/Full Speed
Static Pressure:
0.1 - 0.25
Maximum CFM:
80
Current:
0.20 Max
Energy Star:
Yes
Duct Diameter:
4"
Warranty:
3 Year Limited
Sones:
0.7 - 1.5
Product Group:
Washroom/Bath
Product Subgroup:
Ventilation Fans
Collection:
BreezIntegrity
Product Voltage:
120/60
Product Height:
5-3/4"
Product Category:
Ventilation Fans
Product Width:
10-3/4"
Department:
Plumbing
Product Wattage:
5.0 - 12.0
Product Depth:
9-3/8"

Delta Breez ITG80H – Frequently Asked Questions

1) Will the Delta Breez Integrity ITG80H fit in the opening left by an older bath fan I'm replacing?
The ITG80H housing is 7-1/4 x 7-1/2 x 5-3/4 inches, which is compact enough to go into most existing bath fan openings without opening up the ceiling. It ducts out at 4 inches, so if the old fan ran 4 inch flex or rigid, the duct connection carries over as-is. Overall product dimensions are 10-3/4 x 9-3/8 x 5-3/4 inches. The 5-3/4 inch height is the number to check against your joist bay depth before you buy.
2) How big a bathroom will an 80 CFM Delta Breez Integrity fan actually handle?
Rated for spaces up to 80 square feet at 80 CFM. That covers a typical full bath. If you're ventilating a larger master bath, or one with a separate enclosed toilet compartment or a soaking tub in its own alcove, you're past what a single 80 CFM unit is sized for and you want a higher CFM fan or a second unit.
3) How does the humidity sensor on the Delta Breez ITG80H work, and can I adjust when it kicks on?
The sensor set point is user-adjustable on the unit. Below the set point the fan runs continuously at a low preset level, either 0 or 50 CFM. When humidity rises above the set point it ramps to full 80 CFM on its own and drops back down when the air dries out. That's the whole control scheme, so there's no wall timer or humidistat to buy separately, though you can wire it to a switch if you want manual override of the low-speed leg.
4) What circuit and wattage do I need to plan for the Delta Breez Integrity ITG80H?
It runs on 120V 60Hz and draws 0.20 amps max, with power consumption in the 5.0 to 12.0 watt range depending on speed. Delta rates it at not more than 10.0 watts with a 9.0 CFM/watt efficiency. That load is small enough that several units can share a circuit in a multi-family or hotel retrofit, which is where the continuous-run mode matters most.
5) How loud is the Delta Breez ITG80H bath fan?
Between 0.7 and 1.5 sones across its speed range, with the HVI-certified 1.5 sone rating measured at 0.1 inches static pressure and full 80 CFM. On the continuous low leg it's down near 0.7 sones, quiet enough that occupants tend to leave it running rather than switching it off, which is the point of a continuous-ventilation fan in an apartment or hotel room.
6) Is the Delta Breez Integrity ITG80H rated for continuous 24/7 operation in an apartment or hotel?
Yes. The DC brushless motor is engineered for a minimum 70,000 hours of continuous running, roughly two and a half times the life of a typical AC bath fan motor, and the fan's low setting is built to run non-stop rather than cycle. That's the case for spec'ing it on a multi-family or hospitality job where fans stay energized and a motor replacement means a unit turn.
7) Does the Delta Breez ITG80H qualify for ENERGY STAR on a green building or utility rebate program?
It's ENERGY STAR qualified, with airflow and sound certified by the Home Ventilating Institute. For submittals, the airflow, sone and efficiency figures are HVI-certified numbers rather than manufacturer claims, which is what most green building programs and utility incentive forms ask for.
8) Will an 80 CFM fan still move air through a long duct run with elbows?
Delta rates the ITG80H across 0.1 to 0.25 inches of static pressure, so it holds performance on runs with some back pressure rather than just at the free-air test point. The 80 CFM and 1.5 sone figures are at 0.1 inches. Keep the run in 4 inch duct, since necking down to 3 inch to meet an existing stub will cost you airflow the rating doesn't account for.
9) What's the difference between the ITG80H and a plain 80 CFM bath fan without a humidity sensor?
The H in ITG80H is the built-in adjustable humidity sensor. A standard fan runs only when someone flips the switch, which means it often runs too little during a shower and too long afterward. The ITG80H handles that on its own: it sits at a continuous low level, either off or 50 CFM, and jumps to the full 80 CFM when it senses moisture. On rental and multi-family work that removes the occupant from the moisture control equation entirely, which is the reason to pay for the sensor version.
How fast can I get the Delta Breez ITG80H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delta Breez ITG80H come with a warranty?
Absolutely. The Delta Breez ITG80H is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delta Breez ITG80H?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Delta Breez ITG80H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!