Deltana DCM215 Drawer, Cabinet, Mirror Pull, 2" x 1-1/2"

Not if the panel has to pass with nothing standing proud. The DCM215 angle pull sits on the face of the door and gives you a lip to hook, which needs a small amount of clearance in the track. Where there is none, an edge pull is the part to specify: Schaub's Sabre edge pulls come in 3 inch (10010), 4 inch (10011) and 5 inch (10012) center-to-center. Those recess into the door edge instead of standing on the face.

The Deltana DCM215 is a 2 inch by 1-1/2 inch angle pull, so it does not replace a pull drilled on standard center-to-center spacing. For a 3 inch center-to-center hole pattern, the Trimco 553 Series drawer pull is a 3 inch ctc pull, and the Schaub 10010 Sabre Edge Pull is 3 inch center to center. For 4 inch spacing, the Trimco 562 Series covers 3-1/2 inch, 4 inch and 96mm ctc options, the Schaub 10011 Sabre Edge Pull is 4 inch center to center, and the Omnia 1968/102 is a forged solid brass modern pull with 4 inch center-to-center spacing. Schaub also lists the 10012 Sabre Edge Pull at 5 inch center to center if the existing holes are wider still.

The Deltana DCM215 is a solid brass drawer, cabinet and mirror pull measuring 2 inches by 1-1/2 inches, offered in ten finishes including PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel and Polished Chrome. If you want a comparable forged solid brass pull in a modern profile, the Omnia 1970 Modern Cabinet Pull is forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass with a 1-3/16 inch projection. The Omnia pulls are mounted on center-to-center screw spacing, while the DCM215 is an angle pull sized 2 inches by 1-1/2 inches, so the two are different mounting layouts rather than drop-in swaps.

Solid brass throughout, not a plated zinc casting. For a landlord swapping pulls across a block of units, that matters: brass takes handling without the face cracking or the plating flaking at the grip. Deltana rates the DCM215 for residential use, so it fits apartments, condos and single-family work rather than high-traffic commercial millwork.

Ten, so matching existing hardware in a unit is usually possible: PVD Polished Brass, Polished Brass, Antique Brass, Polished Nickel, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, Oil Rubbed Bronze and Paint Black. PVD Polished Brass is the one to pick over standard Polished Brass where hands are on it daily, since the PVD coating resists wear rather than relying on lacquer.

Different jobs. The DCM215 is a compact 2 x 1-1/2 inch solid brass angle pull meant for sliding panels, mirror doors and swinging cabinet doors. Omnia's 1969, 1970 and 1971 are forged solid brass modern pulls specified by projection, 1-3/16 inch on the 1969 and 1971 and 1-1/4 inch on the 1970, which is the number that tells you how far they stand off the face. Emtek's Schaub Collection pulls, including the SELECT 8405, Alexander, Art Deco and Bar series, are decorative cabinet pulls chosen on style for face-mounted cabinetry. If the door slides, projection is your constraint and the angle pull is the safer pick.

There's no left or right version. Deltana lists the DCM215 as one model in ten finishes, with finish the only choice you make when ordering, so the same part goes on either panel of a bypass pair. Orientation is set by how you mount it, not by the part number.

Yes, and that's the case for standardizing on it. The DCM215 is a single solid brass pull offered in Paint Black and Oil Rubbed Bronze alongside eight other finishes, so a property manager can spec one part number across a portfolio and vary only the finish unit to unit. Same 2 x 1-1/2 inch footprint every time, which means the same mounting layout on every door.

No. The Deltana DCM215 is an angle pull used on sliding cabinet doors, sliding mirror doors, sliding drawers and swinging cabinet doors, and the angle profile is what lets a hand catch the edge of a sliding panel. A round knob such as the Orca Hardware CK-15030 Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the CK-16030 round ring cabinet knob at 1-1/4 inch diameter, or the CK-17025 Blackcomb square cabinet knob at 25mm diameter is a cabinet knob, mounted on a single screw and projecting straight out from the face. Those suit a swinging door or drawer front; on a sliding mirror panel the knob stands proud of the track line where the angle pull sits against the panel edge.

The Deltana DCM215 is a solid brass pull rated for residential use at 2 inches by 1-1/2 inches. For a larger grip on an appliance door, the Schaub 79-8 Steamworks 8 inch cabinet pull is an appliance pull. For a steel pull rather than brass, the Orca Hardware CK-12001 T-Pull Bar is a 2 inch bar width steel pull in satin nickel. Emtek's Schaub Collection also covers this range with the Bar Cabinet Pull, the Art Deco Cabinet Pull and the Alexander Cabinet Pull if you want a longer bar profile in a matched family.

The Deltana DCM215 is a single 2 inch by 1-1/2 inch solid brass angle pull carried in ten finishes: PVD Polished Brass, Oil Rubbed Bronze, Polished Nickel, Brushed Nickel, Antique Nickel, Paint Black, Polished Chrome, Brushed Chrome, Polished Brass and Antique Brass. That covers one shape across a wide finish range. Emtek's Schaub Collection instead spans several series under one family - the Emtek 8405 SELECT series, the Alexander series, the Art Deco series and the Bar series, all cabinet knob and pull function. If the goal is one shape in many finishes, the DCM215 does it in a single part number; if the goal is several shapes sharing a design language, the Emtek series give you that spread.

They serve different mounting situations. The Deltana DCM215 is an angle pull that mounts to the face of a sliding cabinet door, sliding mirror door, sliding drawer or swinging cabinet door. The Schaub 10010, 10011 and 10012 Sabre pulls are edge pulls, in 3 inch, 4 inch and 5 inch center to center - an edge pull is set into or against the edge of the panel rather than the face. If your sliding panel has a mirror front or you are pulling from the face, the DCM215 profile is the one that applies; if the detail calls for a recessed or edge-mounted grip, the Sabre pulls are the ones to look at.