Deltana DSF630 Floor Mount, 6" Bumper Door Stop with Hook

Everything for the mount is in the bag. The DSF630 comes packed in an individual poly bag with the hook eye and concrete/wood mounting hardware, so you can set it into a slab or a wood subfloor without sourcing anchors. Sold each.

Rated for commercial use and built in solid brass, at 2.55 lbs each. That mass and the 6 inch height are what let it take repeated contact on a heavy entry leaf rather than flexing like a light residential bumper. For an opening where you want a purpose-built heavy duty commercial stop instead, Ives lists the FS13 and FS17 brass floor dome stops as heavy duty.

The DSF630 stands 6 inches, which is why it works on doors with a tall undercut, thick carpet, or a raised threshold where a low dome stop passes underneath and never makes contact. Measure from the finished floor to the point on the door face you want struck; if that height is well under 6 inches, a low rise dome like the Orca 23LP Series suits the opening better.

The Deltana DSF630 is a 6 inch solid brass floor mounted bumper supplied with a hook eye, so it both stops the door and holds it open against the hook. If you want that hold-open function without a wall-mounted hook eye, the Ives FS40 / FS41 / FS42 / FS43 is a heavy duty automatic floor stop and holder with adjustable door-to-floor clearance, and the SOSS MDH is a heavy duty magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches. The Deltana holds by mechanical hook, the Ives by a foot-actuated automatic mechanism, and the SOSS by magnet.

The Deltana DSF630 stands 6 inches, which is the usual answer when the door bottom clears the floor too far for a low dome to make contact. Other tall floor stops in the same shape are the Orca Hardware 22HD Series goose neck floor stop with a black tip, listed for 1-3/8 inch or 1-3/4 inch doors and catalogued with a door holder function, the Emtek 2253 Goose Style door stop, and the Delaney Gooseneck floor door stop. Where the undercut is small, the short bumpers apply instead: the Emtek 2254 floor door bumper at 1-3/8 inches by 1-1/4 inches, or the Emtek 2257 cylindrical floor bumper at 1-1/2 inches.

They are not interchangeable on the same opening. The Deltana DSF630 is a 6 inch floor mounted bumper with a hook, tall enough to catch the door face and hold it. The Emtek 2254 floor door bumper measures 1-3/8 inches by 1-1/4 inches and the Emtek 2257 cylindrical floor bumper is 1-1/2 inches, both low bumpers that contact the bottom edge of the door and provide no hold-open. Swapping a 6 inch hook bumper for either one changes both the contact point on the door and the function.

Ten finishes: PVD Polished Brass, Polished Brass, Unlacquered Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. PVD Polished Brass is the one to specify where you want the brass look to hold up in a high traffic corridor or exterior-adjacent opening; Unlacquered Brass will patina over time, which some specs call for deliberately. Spec one finish across the fleet and the stops match door to door.

A hook style like the DSF630 holds the door open only when someone reaches down and drops the hook onto the eye, which is what you want when hold-open should be a deliberate act. An automatic floor stop and holder engages on its own as the door swings to it, which suits doors that get propped constantly; Ives lists the FS40 / FS41 / FS42 / FS43 as an automatic floor stop and holder with adjustable door-to-floor clearance. If you want no hold-open function at all, a plain dome or gooseneck bumper is the cleaner choice.

Yes, and the anchors come with it. The mounting hardware in the bag covers both concrete and wood, so the same part works over a slab in a commercial corridor or a wood subfloor in a residential unit. It is a floor mount only, not a wall or baseboard stop.

The DSF630 is solid brass all the way through, not plated steel, so it will not rust out where the floor gets mopped or wet. The finish is the variable, not the substrate: a lacquered or unlacquered brass finish will change appearance with moisture and cleaning chemicals, while PVD Polished Brass, chrome, and nickel finishes hold their appearance better in those spots.

Both mount to the floor, but the geometry differs. The DSF630 is a straight 6 inch bumper with a hook, so it takes the door square on and adds hold-open. A gooseneck curves up and back to meet the door face at an angle, which is useful where the strike point sits away from where you can anchor; Delaney lists the 40118X Gooseneck Door Stop and Emtek the 2253 Goose Style Door Stop. Orca's 22HD Series gooseneck is listed as a door holder for 1-3/8 inch or 1-3/4 inch doors.

Drop to a low profile bumper. Emtek's 2254 Floor Door Bumper measures 1-3/8 x 1-1/4 inches and the 2257 is a 1-1/2 inch cylindrical floor bumper, both far shorter than the DSF630's 6 inches. Note the tradeoff: neither is a hold-open, so if you need the door to stay open you keep the hook style and adjust where you set it instead.

The Deltana DSF630 is a solid brass floor mounted bumper catalogued for commercial use, supplied with concrete and wood mounting hardware. Where the concern is tampering or removal, the Ives FS18S/FS18L is a heavy duty security floor stop, and the Ives FS13 heavy duty brass floor dome stop takes a replaceable rubber bumper so the wear part can be changed without pulling the base. Those are the ones to look at when the opening sees abuse rather than ordinary traffic.

The Deltana DSF630 covers the hold-open openings: a 6 inch solid brass floor bumper with a hook eye, offered in finishes including polished chrome, brushed nickel, oil rubbed bronze and polished brass so it can be matched to the rest of the hardware. For the stop-only doors in the same program, the Orca Hardware 23LP Series low rise dome floor stop with a gray tip and the Orca Hardware 22HD Series goose neck floor stop with a black tip come from one series family, and on the Ives side the FS17 brass floor dome stop and the FS40 / FS41 / FS42 / FS43 automatic floor stop and holder split the same way between stop and hold-open.

They solve the hold-open the same way only in outcome. The SOSS MDH is a heavy duty magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches, which catches the door with a magnet and a strike plate on the door face. The Deltana DSF630 is a 6 inch solid brass bumper packed with a hook eye and concrete or wood mounting hardware, so the door is caught mechanically by the hook. The magnetic unit requires a mating plate on the door; the Deltana requires the hook eye to be set in the door.

One. The DSF630 is sold each, packed individually in a poly bag with its hook eye and mounting hardware, so a 40 door retrofit is 40 line quantity, not 20 pairs.

The DSF630 is a standard commercial bumper with a hook, not a security stop. Where tenants or the public work a stop loose, Ives lists the FS18S/FS18L Security Floor Stop as a heavy duty option built for that. A magnetic alternative also exists: the SOSS MDH Magnetic Door Holder and Stop, 3-5/16 x 1-3/4 inches, holds by magnet with no hook to snag a foot.