Deltana DSF830 Floor Mount, 8" Bumper Door Stop with Hook

The DSF830 does both. It's a floor mounted bumper with a hook, so the door stops against the bumper and the hook eye catches to hold it open. The hook eye is included in the bag along with the mounting hardware. If you only need the door stopped and never held, a plain dome stop like the Ives FS17 or the Orca 23LP low rise dome is the simpler part.

The DSF830 is the 8 inch size in Deltana's floor bumper range. That's a tall bumper, so it stands well above a normal door undercut and catches the door on the face rather than the bottom edge. It's the right choice when the door has a big gap at the floor or you're stopping the door well off the wall. For a door sitting tight to the floor, a low profile stop such as the Emtek 2254 floor bumper is the better fit.

Yes. Each DSF830 ships in an individual poly bag with both concrete and wood mounting hardware, so it goes into a slab or into a wood subfloor without sourcing separate anchors. That covers most commercial and multi-family openings where the corridor side is slab and the unit side is wood.

The DSF830 is a floor mounted 8 inch bumper stop with a hook, so it both stops the door and hooks it open. If you want that hold-open function in a different style, the Orca Hardware 22HD Series goose neck floor stop with black tip is listed as a door holder, and the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is a heavy duty unit with adjustable door-to-floor clearance. The SOSS MDH is a magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches, which catches the door magnetically rather than with a hook.

The DSF830 stands 8 inches tall on a floor mount, which suits a door with a large undercut or a wide swing to the wall. For a tight door-to-floor gap, the Orca Hardware 23LP Series is a low rise dome floor stop with a gray tip, and the Emtek 2254 floor door bumper measures 1-3/8 inches by 1-1/4 inches. The Emtek 2257 is a 1-1/2 inch cylindrical floor bumper. All three sit low to the floor rather than rising on a post.

It is not an equivalent. Dome stops such as the Ives FS13 heavy duty brass floor dome stop with replaceable rubber bumper, the Ives FS17 heavy duty brass floor dome stop with rubber bumper, the Emtek 2251 half dome door stop and the Delaney dome stop all arrest the door at floor level and have no hook to hold it open. The DSF830 carries a hook eye in the box along with concrete and wood mounting hardware, so swapping to a dome stop drops the hold-open feature and the strike-side hook eye that goes on the door.

Five: Polished Brass, Polished Chrome, Brushed Nickel, Oil Rubbed Bronze, and Paint Black. That's the full range, so a property manager standardizing across a building can match the DSF830 to the lever and hinge finish already on the doors rather than settling for a mismatched stop.

A gooseneck stop, such as the Delaney Gooseneck or the Orca 22HD, arcs up off the floor to catch a door with a large undercut and is mainly a holder. The DSF830 is a straight 8 inch floor bumper with a hook, so it takes the door's impact head on and latches it open. Gooseneck stops sit further into the walking path; the bumper is the tidier install where foot traffic passes the open door.

The DSF830 is a solid brass floor bumper Deltana classes as commercial. Where the opening sees institutional abuse or you need a stop rated heavy duty by the maker, the Ives FS13 and FS17 brass floor dome stops are listed heavy duty, and the FS13 takes a replaceable rubber bumper so the wear part can be changed without pulling the base.

No. The DSF830 anchors to the floor only, and the hook geometry depends on that. For a baseboard or wall mount you need a different stop entirely, not this one reoriented.

The DSF830 is a solid brass floor mounted stop rated commercial, and it is a decorative fit where finish matters. Where the specification calls out a duty level, the Ives FS13, FS17 and FS18S/FS18L are all listed heavy duty, with the FS18S/FS18L described as a security floor stop, and the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is heavy duty with adjustable door-to-floor clearance. The SOSS MDH magnetic door holder and stop is also heavy duty.

The DSF830 ships with a hook eye that mounts to the door, which is what makes the hold-open work. If nothing may be fastened to the door leaf, a floor-only bumper avoids it: the Emtek 2257 is a 1-1/2 inch cylindrical floor bumper, the Emtek 2254 floor door bumper is 1-3/8 inches by 1-1/4 inches, and the Ives FS13 heavy duty brass floor dome stop uses a replaceable rubber bumper so the wear part can be changed without touching the door.

They hold a door open by different means. The DSF830 uses a mechanical hook and hook eye on an 8 inch solid brass floor mounted post, so the door is latched open until it is lifted off. The SOSS MDH is a magnetic door holder and stop measuring 3-5/16 inches by 1-3/4 inches and rated heavy duty, so the door pulls free of the magnet with a firm push. Choose by whether the door should release under hand pressure or stay hooked.