Deltana DSFR Royal Hinge Finial, 3", Solid Brass (Each)

Just the tip. The DSFR is a finial only, a threaded ornamental end that screws onto the pin of a Deltana Royal hinge. You still need the hinge itself. If you are looking for a whole decorative hinge, the McKinney SQ3331 square barrel 2-knuckle decorative hinge in 4-1/2 by 4-1/2 is a full hinge we carry.

It is a residential decorative part with a plain bearing, full mortise hinge application, and it only threads to the Deltana Royal pin. For commercial traffic you want a bearing hinge instead, such as the Ives 3CB1HW heavy weight concealed bearing full mortise hinge or the Orca 3535 Series 4-1/2 by 4-1/2 square corner ball bearing hinge.

No. The finial is decorative and the Royal hinge it mounts to is not a non-removable-pin arrangement, so the pin can still be drawn. For an out-swing exterior opening where pin removal is a concern, use an NRP hinge such as the Hager BB1168 NRP full mortise ball bearing hinge.

No. The DSFR is a 3 inch solid brass decorative finial tip that threads onto Deltana's Royal Hinge DSB45RM with a 14 x 2mm thread; it carries no leaves and no door weight. If what you need is the hinge itself, full mortise hinges such as the McKinney MP79 MacPro 5-knuckle standard weight or the Ives 3CB1 3-knuckle concealed bearing full mortise hinge are the load-carrying parts.

Each DSFR Royal finial is sold singly. A hinge takes a finial at the top and bottom of the pin, so plan your quantity per hinge and per opening accordingly.

Four: Oil Rubbed Bronze, Bronze Dark, White Light and White Medium. Match the finial to the hinge finish, since the finial is solid brass and reads as a separate piece of trim on the barrel.

The McKinney SQ3331 is a decorative hinge in its own right, a square barrel 2-knuckle unit at 4-1/2 inch by 4-1/2 inch with a standard duty rating, so the styling is built into the hinge rather than added as a threaded tip. The Deltana DSFR takes the other approach: a 3 inch solid brass finial, 7/8 inch diameter, that screws onto the Royal Hinge barrel and is offered in Oil Rubbed Bronze, Bronze Dark, White Light and White Medium.

Plan on it fitting only Deltana's Royal Hinge DSB45RM, which is what the DSFR's 14 x 2mm thread is cut for. Hinges like the Hager 920 full mortise concealed plain bearing 2-knuckle, the Ives 3CB1HW heavy weight concealed bearing hinge, and electrified units such as the BEST CECB179-12C with 12-wire quick connect or the Command Access ETH-CB70 energy transfer hinge use their own barrel and tip construction and are not finial-threaded.

The Deltana DSFR is a residential-duty decorative accessory, plain bearing, square corner, full mortise family. For a plain functional opening, the Emtek 91013 residential plain bearing hinge pair at 3-1/2 by 3-1/2 inches with square corners in plated steel, the Ives 1010RP steel plain bearing residential hinges in sets of three, and the Schlage Residential S3P1010 3.5 by 3.5 inch square corner plain bearing mortise hinges in packs of three are all square corner plain bearing options.

The Deltana DSFR is a residential decorative finial with no non-removable pin feature. For heavier or security-minded openings, the Hager BB1168-NRP is a non-removable pin full mortise ball bearing heavy duty hinge, the BEST CB1969R is a concealed bearing heavy weight pivot-reinforced hinge, and the BEST BB855 and Stanley Security BB855 are double weight prison hinges, the Stanley version at 5 inch by 6 inch furnished with no holes and not swaged.

The Royal hinge it dresses is a square corner, full mortise pattern, so it suits a squared hinge pocket rather than a radius-corner one. The finial itself sits on the pin and does not change the mortise prep.