Deltana MM2001 Toilet Paper Holder, Single Post, Stainless Steel, MM Series

Projection is 3 1/16 inches off the wall face, on a 2 3/16 x 2 3/16 inch base. That matters in a tight powder room or a narrow ADA-height stall wall where a roll on a single post plus the projection has to clear the toilet, the door swing, or a grab bar. Measure from the finished wall, not the tile substrate, before you set the anchor.

The MM2001 is stainless steel. The MM bath series as a family is described as solid brass, but the material called out for the MM2001 itself is stainless steel, both in the spec list and in the material and substrate fields. If you are specifying for a coastal or high-humidity building and the submittal asks for the metal, stainless is what you write down for this model.

A single post holder like the MM2001 holds the roll on one open arm, so the roll loads from the end without pulling a spring rod out of two brackets. That is the low-maintenance choice for high-turnover restrooms and rentals, since there is no plastic tube to snap and nothing loose for a tenant to lose. If you want the roll captured on both ends instead, the bar style is the alternative: Emtek's Modern Brass, Transitional, Traditional and Sandcast Bronze bath lines each offer a bar style paper holder. Holders with a plastic roller, like the Orca Hardware 2752 Cypress or the 4852 Blakely, keep the roll spinning freely but add a wear part.

The mounting base is 2 3/16 x 2 3/16 inches, so it will conceal old anchor holes only if they fall inside that footprint. Most two-post holders sit on a much wider spread than that, and the MM2001 is a single post, so plan on patching and re-anchoring rather than reusing the existing holes. If you are swapping units across a building, measure one wall first and use it as the template for the rest.

The Deltana MM2001 belongs to the MM Series, which Deltana positions for contemporary bathrooms. For a traditional look, the Emtek Traditional Brass Paper Holder - Bar Style comes from Emtek's Traditional Bath Hardware series, and the Emtek Sandcast Bronze Paper Holder - Bar Style comes from the Sandcast Bronze Bath Hardware series. Both are bar style rather than single post, so the roll loads onto a bar between two mounts instead of onto one projecting post.

The Deltana MM2001 is a single post holder, so the roll slides onto the post with no spindle to replace. When a tube is wanted, the Orca Hardware 2752 in the 27-Cypress Series and the Orca Hardware 4852 Blakely in the 48-Blakely Series are both supplied with a plastic tube. The tube is a consumable that can crack and be swapped; a single post has no such part.

They are not interchangeable at the wall. The Emtek Modern Brass Paper Holder is a bar style holder in the Modern Brass Bath Hardware series, which mounts on two posts spanned by a bar. The Deltana MM2001 is a single post holder with one 2 3/16 by 2 3/16 base. Replacing an MM2001 with the Emtek bar style means a second anchor point and new drilling; both read as contemporary, but the mounting pattern differs.

It is classified as commercial. That is the answer a property manager or MRO buyer needs when the spec calls for commercial bath accessories rather than a residential retail line, and the stainless construction with no plastic roller backs it up for a shared restroom.

Four finishes: Brushed Nickel, Polished Chrome, Brushed Brass, and Paint Black. Since the MM2001 is part of Deltana's MM bath series, ordering the towel bars, rings and hooks from the same series in the same finish is how you get the whole washroom to match rather than mixing finish names across brands.

The MM2001 is a contemporary single post in stainless steel with a 3 1/16 inch projection. Orca's euro style units, the 3655 Swirl and the 5255 Ripple, are decorative series pieces rather than a plain contemporary post, and Orca's 2752 Cypress and 4852 Blakely carry a plastic tube for the roll. If the drawing calls for clean modern lines with no roller, the MM2001 is the match; if the room is styled traditional or you want the roll on a spinning tube, look at the Orca series instead.

The MM2001 is a single post holder in Deltana's MM Series with a 2 3/16 by 2 3/16 base and 3 1/16 projection. For a euro style open roll holder, the Orca Hardware 3655 Swirl in the 36-Swirl Series and the Orca Hardware 5255 Ripple in the 52-Ripple Series are both euro toilet paper holders. All three load the roll without a hinged arm, so the swap is a matter of styling and base footprint at the existing anchors.

For a transitional package, the Emtek Transitional Brass Paper Holder - Bar Style sits in Emtek's Transitional Bath Hardware series, so it coordinates with the rest of that suite. Deltana's MM2001 is part of the MM Series, an all stainless steel contemporary collection offered in Brushed Nickel, Paint Black, Polished Chrome and Brushed Brass. Choosing by series keeps towel bars, rings and paper holders consistent across the room.

The Deltana MM2001 is rated for commercial use and is built in stainless steel, and its single post design has no moving or removable part for a tenant to break or lose. Tube style holders such as the Orca Hardware 2752 and the Orca Hardware 4852 Blakely use a plastic tube, which is replaceable but is an additional part to stock. For standardizing across a portfolio, the tradeoff is fewer parts on the single post versus a serviceable roll tube on the Orca units.