Deltana SWP4744 Switch Plate, Quadruple Rocker, Solid Brass

The SWP4744 is a four-gang decora/rocker plate measuring 4-5/8 x 8-1/8 inches. It covers four rocker (decora style) openings in a standard four-gang box, so it swaps directly onto a bank of four dimmers, rocker switches, or GFCI devices ganged together. If your box holds three devices or fewer, this is the wrong plate size.

No. The SWP4744 is cut for rocker (decora) style devices, which use a large rectangular opening. Standard toggle switches need a toggle plate with the small keyhole cutout, and a toggle will not mount behind this cover. Check what's on the wall before you order, since both styles share the same gang spacing.

Solid brass throughout, not a plated stamping. That matters in two places: brass holds an applied finish far better where a plate gets touched constantly, and it won't dent the way a thin steel cover does in a corridor or lobby. Deltana rates it for commercial use.

Nine finishes: PVD Polished Brass, Polished Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome, Brushed Chrome, and Paint Black. If you're matching existing Deltana levers or door trim across a building, pick the same finish code and the plates will read as one package. PVD Polished Brass is the version to specify where the plate sees hands all day, since PVD is a harder coating than lacquered brass.

Yes, and that's how these are meant to be spec'd. The SWP4744 is the quadruple rocker template in Deltana's switch and plug plate line, which is built as a family of templates in a shared set of finishes. Order the four-gang for your ganged corridor and lobby banks and the matching single and double templates for guest rooms in the same finish, and the whole property reads consistently. Ordering is per plate.

Yes. Rocker style dimmers use the same decora opening as rocker switches, so a four-gang bank of decora dimmers takes this plate. The only fit question is the gang count and the opening style, not what the device does. Overall plate size is 4-5/8 x 8-1/8 inches, so confirm you have that much clear wall around the box before you order.

Deltana supplies these plates with finish-matched mounting screws, so the fasteners disappear into the face rather than showing bright steel. What you don't get is the device itself. The switch, dimmer, or receptacle is a separate electrical purchase, and the plate mounts to the device yoke, not to the box.

Priced and sold each, one plate per four-gang location. Count gang boxes, not devices: a wall with eight rocker switches in two separate four-gang boxes takes two SWP4744 plates, while eight switches in one continuous eight-gang box needs a different template entirely.