You may also like
Klein Tools D220-7 Diagonal Cutting Pliers, Heavy-Duty, Tapered Nose, 7-Inch
Model: KLN-D220-7
Diagonal Cutting Pliers, Heavy-Duty, Tapered Nose, 7-Inch
Features
Handform handles for comfort and ease of identification
Hot-riveted joint ensures smooth action and no handle wobble
Forged in the...
Klein Tools
$103.21
$53.21
Klein Tools D228-7 Diagonal Cutting Pliers, High-Leverage, 7-Inch
Model: KLN-D228-7
Diagonal Cutting Pliers, High-Leverage, 7-Inch
Features
Plastic-dipped handles for comfort and ease of identification
Short jaws and beveled cutting edges permit close cutting of wire
Made in USA...
Klein Tools
$87.49
$37.49
Klein Tools D228-8-INS Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Model: KLN-D228-8-INS
Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch
Warnings
Wear approved eye protection.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an...
Klein Tools
$140.89
$90.89
Klein Tools D2000-28-INS Diagonal Cutting Pliers, Insulated, Heavy-Duty, 8-Inch
Model: KLN-D2000-28-INS
Diagonal Cutting Pliers, Insulated, Heavy-Duty, 8-Inch
Warnings
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Do NOT touch uninsulated portion of the...
Klein Tools
$147.40
$97.40
Klein Tools D203-7-INS Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
Model: KLN-D203-7-INS
Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
Warnings
Wear approved eye protection.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because...
Klein Tools
$131.16
$81.16
Diagonal Cutting Pliers, Insulated, 7-Inch
D220-7-INS - spec sheet
Warnings
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Wear approved eye protection.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Features
- Integral guards help prevent hand contact with conductive parts
- Tapered nose design and induction hardened cutting knives for long life
- One-Inch deep jaws easily reach into confined spaces
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Clearly marked with the official 1000-volt rating symbol
- Hot-riveted joint for smooth action and no handle wobble
- Flame retardant, impact-resistant, bright orange outer coating
- Flame Retardant and Impact Resistant Handle
- Forged in the USA with custom, US-made tool steel for maximum durability
- Pliers with grips made of durable molded insulation meet or exceed ASTM F1505-16 and IEC 60900 -2018 standards for insulated tools
D220-7-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Diagonal-Cutting
- Cutting Knives:
- Standard
- Depth:
- 7.8750 in
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 4.34" (11 cm)
- Height:
- 0.5000 in
- Insulated:
- Yes
- Jaw Capacity:
- 1.1" (2.8 cm)
- Jaw Length:
- 1" (2.5 cm)
- Jaw Thickness:
- 0.5" (1.3 cm)
- Jaw Width:
- 0.969" (2.5 cm)
- Joint Type:
- Hot-Riveted
- Material:
- Induction Hardened Steel
- Nose Type:
- Tapered
- Overall Length:
- 7.67" (19.5 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Diagonal Cutting Pliers
- Weight:
- 0.7000 lbs
- Width:
- 3.9000 in